Allwinner H616 Custom Rom Upd -
Would you like a ready-to-use update script template or a Yocto/Buildroot recipe for H616?
Leia/Nexus builds specifically for H616.
The gold standard for H616 TV boxes.
| ROM Name | Base Android | Best For | Link | | :--- | :--- | :--- | :--- | | Aidan's ROM (v8) | Android 12 | ATV UI, Netflix fix | [XDA Thread] | | Tanix TX6s Stock Mod | Android 10 | Stability, remote fix | [4pda] | | LineageOS 20 (Unofficial) | Android 13 | Orange Pi Zero 2 only | [Github: OpiZero2] | | EmuELEC 4.6 | Linux (CoreELEC) | Retro gaming (N64/PS1) | [EmuELEC.tv] |
| Problem | Solution |
|---------|----------|
| Boot loop after flashing | Check DTB compatibility; use stock DTB as base |
| No HDMI output | H616 requires special HDMI PHY init in U-Boot; enable CONFIG_VIDEO_SUNXI |
| USB not working | Mainline kernel needs sun50i-h616-usb-phy driver; backport from 5.15+ |
| DRAM size wrong | Adjust CONFIG_DRAM_CLK and CONFIG_DRAM_ZQ in U-Boot |
| Wi-Fi/BT chip (e.g., RTL8822CS) | Requires vendor firmware blob + rtl_bt kernel module | allwinner h616 custom rom upd
SPL (Secondary Program Loader)
U-Boot
Kernel
RootFS
# Load SPL and U-Boot into RAM
sudo sunxi-fel spl boot0.bin
sudo sunxi-fel write 0x2000 u-boot.bin
# Then jump to U-Boot
sudo sunxi-fel exe 0x2000
In U-Boot console:
=> setenv bootargs console=ttyS0,115200 root=/dev/mmcblk0p5
=> load mmc 0:1 0x40080000 uImage
=> load mmc 0:1 0x43000000 sun50i-h616.dtb
=> bootm 0x40080000 - 0x43000000
6 Games
