As of the last major update, the standard CHIRP build (CHIRP-next) does not officially list the "UV-10R." It supports the UV-5R platform. The UV-10R uses a different CPU chipset (often the BK4819 or similar).
However: Many users have success selecting a "Baofeng UV-82" or "BF-888" profile. Proceed with caution. Using the wrong firmware profile can write garbage data to the radio, locking it up (requiring a factory reset via a key combo).
The OEM software looks like it was designed for Windows 98. Installing it on Windows 10/11 requires patience.
Step-by-step:
Some units are labeled "Pofung" (Baofeng’s official brand name). The software file is often the same. Look for versions labeled V1.04 or higher, as early builds had bugs with Windows 10/11.
If you are a fan of the open-source CHIRP software, you might hit a wall. As of this writing, the daily build of CHIRP does not natively support the UV-10R. The UV-10R uses a slightly different chipset than the standard "UV-5R" family.
Do not try to force the UV-5R driver onto your UV-10R. Users report that this causes "Earpiece volume lock" or "TX Error" messages. Baofeng Uv-10r Programming Software
1. Create a "Base Template"
Before messing with settings, use the software to read the radio and save that file as UV10R_Factory_Backup.img. Store it in two locations. This is your lifeline.
2. Use CSV for Mass Programming If you have 50 repeaters listed in a spreadsheet, use the official software to export to CSV, edit in Excel (keeping the column headers identical), and re-import. This saves hours of typing.
3. Optimize for Scanning In the software, there is a column called "Scan" (or "Skip"). Set frequently used channels to "ON" and emergency-only channels to "OFF" so the scan function moves faster. As of the last major update, the standard
4. Firmware Updates Unlike the UV-5R, the UV-10R rarely receives public firmware updates. The software is meant for channel programming only. Do not attempt to "update firmware" via the software unless you have a specific file from the manufacturer—doing so will likely brick the radio.
Once you have the OEM software installed and the cable connected: