What is it? Canon Service Mode Tool Version 1050 is a utility software used by technicians to reset internal counters on specific Canon Pixma inkjet printers. It is typically used when a printer stops working and displays an error related to the "Ink Absorber" or "Waste Ink Pad."
Primary Functions:
Supported Printers (Common Models): This specific version is typically designed for older models, such as: canon service mode tool version 1050
Even with the correct steps, you may encounter issues. Here is a cheat sheet:
| Error | Likely Cause | Solution | | :--- | :--- | :--- | | Timeout / No Device | Windows driver conflict | Uninstall Canon printer drivers manually from Device Manager. Leave only the basic USB printing class driver. | | Wrong USB Chipset | USB 3.0 ports | Use a USB 2.0 port (or USB 2.0 hub connected to USB 3.0). The tool is 32-bit, low-speed. | | Error 009 / 006 | Wrong service mode entry sequence | Power cycle. Retry the button sequence slower (2 seconds between steps). | | Tool crashes on launch | Missing DLL files | Install Visual C++ Redistributables (2010-2022). Run in Windows 7 compatibility mode. | What is it
If you cannot find a safe copy of v1050, or if your printer is incompatible, consider these alternatives:
Now plug in the USB cable. Windows may chime to indicate device detection. Do not open any printer software. Supported Printers (Common Models): This specific version is
Using the Canon Service Mode Tool version 10.50 requires careful attention to safety and precautions. Improper use of the tool can lead to further damage to the printer, data loss, or even physical injury. Therefore, it is strongly recommended that only authorized and trained technicians use this tool.
| Error Message | Likely Cause | Solution | |---------------|--------------|----------| | “Tool does not recognize printer” | Wrong USB driver or not in Service Mode | Re-enter Service Mode. Use different USB port. Disable antivirus temporarily. | | “Waste ink set error 006” | Counter overflow protection triggered | Unplug printer for 30 seconds. Retry method. If persists, you need a physical waste pad replacement. | | “EEPROM read failed” | Corrupted communication | Use shorter USB cable (< 3 feet). Disable other USB devices. | | “Version mismatch” | Printer firmware too new for v1050 | You need v2000 or higher. |
The primary use case for 1050 is firmware flashing. However, its depth lies in its selectivity:
If your printer is a newer model (e.g., PIXMA TS series, TR series, G series MegaTank, or Pro-1000), Version 1050 will NOT work. You would need service tool v4.0 or higher, or Canon’s cloud-based SST.