© 2026 Erika Lancaster. All rights reserved.
Below are representative codes often compatible with Chunghop remotes. Try codes in order; many universals accept multiple code sets per brand. If one set fails, try the next.
If a brand is not listed, try general TV codes such as 0000, 1000, 0100, or run auto‑search.
Use this if you cannot find a code for your brand or the codes don't work.
Some EH907 models allow you to turn off all devices at once.
Note: Codes vary by device version. If one doesn't work, try the others listed next to your brand.
TV Brands (Try TV1 or TV2 Button):
DVD / VCD Brands (Use DVD Button):
(If your brand is not listed, use the Auto Search Method B).
Even with the manual, issues occur. Here is the official troubleshooting guide.
| Problem | Likely Cause | Solution | | :--- | :--- | :--- | | LED doesn’t light up | Dead batteries | Replace with fresh AA/AAA batteries. | | Remote works, but not all buttons | Wrong code mode | Reprogram using a different 4-digit code for your brand. | | Device responds very slowly | Weak signal or obstacles | Clean the IR emitter (front tip) with a soft cloth. Ensure line-of-sight. | | Code search fails to find device | Device uses RF, not IR | The EH907 is infrared only. It will not control Bluetooth or RF-only devices (some modern Roku sticks or Fire TV). | | Volume controls the TV when in DVD mode | Volume lock is set to TV | This is a feature, not a bug. Follow "Volume Lock" above to change. | | Remote controls two devices at once | Code conflict | Reset the remote fully and reprogram one device at a time without pressing extra buttons. |
There are three ways to program your Chunghop EH907. Method 1 (Direct Code Entry) is the fastest and most reliable. Only use Method 2 or 3 if you cannot find your brand’s code.
This method allows you to search through the code database one by one at your own pace.
The CHUNGHOP E-H907 is a specialized universal remote control primarily designed for Hisense LED, LCD, HDTV, and 3DTV models. It is marketed as an "innovative technology" replacement that often requires no initial setup for compatible brand models. Key Specifications Dimensions: 47.5mm (W) x 196.5mm (L) x 22.5mm (D). chunghop eh907 manual full
Buttons: 63 functional buttons for comprehensive TV control. Power: Requires 2 x AAA batteries (not included). Range: Operational distance of ≥ 8 meters.
Compatibility: Broadly supports Hisense smart TV models, including series like H45N5750, H50N5900, and H65NU8700. Programming Instructions
While many users report it works directly after battery installation, you can use these standard Chunghop methods if it does not immediately pair: Direct Code Entry:
Find your TV brand's 3-digit code from a standard Chunghop code list.
Press and hold the SET and POWER buttons simultaneously until the indicator light stays on.
Enter the 3-digit code. The light will turn off if successful. Automatic Search: Turn on your TV manually. If a brand is not listed, try general
Press and hold the SET button for about 4–6 seconds until the indicator light starts flashing.
Point the remote at the TV. When the Volume symbol appears on the screen, immediately release the SET button to lock the code. Brand Quick Search:
Check for a "brand table" where specific numbers correspond to brands (e.g., "3" for Sony).
Hold the corresponding number key for ~6 seconds while pointing at the TV until the volume bar appears, then release. Troubleshooting & Maintenance
Factory Reset: To restore original settings, press and hold SET and 0 together for 3 seconds until the light flashes twice.
Battery Replacement: If the remote response becomes sluggish or the light fails to blink, replace both AAA batteries with new ones to avoid programming loss. DVD / VCD Brands (Use DVD Button):
Button Failure: If some keys don't work after setup, repeat the programming process to find a more compatible code within the same brand group.
You can find more detailed model-specific information on the Official Chunghop Product Page or download general manuals from Remote Central. Universal Remote Control User Manual