Craftsman Digital Multimeter 82082 User Manual -

  • Current (mA/10A DC):

  • Resistance/Continuity:

  • Diode test:

  • Transistor hFE:

    • This multimeter has been designed for CAT II (Category II) measurements. It is intended for use on household circuits, appliances, and receptacles, not for industrial or high-energy electrical systems.

    WARNINGS:

    The Craftsman 82082 is a compact, manual-ranging digital multimeter designed for DIY homeowners, hobbyists, and automotive enthusiasts. It measures AC/DC voltage, DC current, resistance, and features a diode test and continuity buzzer. craftsman digital multimeter 82082 user manual

    Critical Safety Rules (Read First):

  • Never apply voltage to the meter when the test leads are plugged into the mA or 10A jacks.
  • Always start with the highest range if the value is unknown.
  • Remove test leads before opening the battery/fuse cover.

    • The manual prominently features WARNINGS and CAUTIONS to prevent injury or equipment damage.

    Important Safety & Operational Guide

    Read this manual thoroughly before use. Failure to follow these warnings can result in electric shock, injury, or damage to the meter or equipment under test.

    For decades, Craftsman has been a trusted name in garages, workshops, and job sites across America. Known for rugged, reliable, and user-friendly tools, their line of digital multimeters—including the Craftsman Digital Multimeter model 82082—continues this tradition. Whether you are a professional electrician, an automotive DIY enthusiast, or a hobbyist troubleshooting a home appliance, the 82082 is designed to measure voltage, current, and resistance accurately.

    However, as with any precision instrument, understanding the manual is not just recommended—it is essential. Losing the original printed manual is common. This article serves as a comprehensive replacement user manual, walking you through every function, safety protocol, and maintenance step for the Craftsman 82082. Current (mA/10A DC):

    Note to the reader: Always keep the original manufacturer’s manual if available. This guide is for educational reference based on standard specifications for the 82082 model. Functions may vary slightly by production year (typically early 2000s to 2010s).

    Craftsman is a registered trademark of Stanley Black & Decker, Inc. This document is for informational use. Refer to the physical manual included with your product for warranty terms and complete safety instructions.

    The Craftsman Digital Multimeter 82082 is a manual-ranging tool used for measuring standard electrical properties including voltage, resistance, and current. Unlike auto-ranging models, this device requires you to manually select the correct measurement range using its rotary dial to ensure accurate readings. Key Controls and Ports

    Selector Dial: Used to switch between measurement modes like VAC (AC Voltage), VDC (DC Voltage), Ωcap omega (Resistance), and A (Current).

    COM Port: The "Common" jack where the black probe always connects. V- Ωcap omega

    -mA Port: The standard red jack for measuring voltage, resistance, and low current (up to 200mA). Resistance/Continuity:

    10A Port: A specialized jack for measuring high current (above 200mA). Standard Operating Procedures Measuring Voltage

    Plug the black lead into the COM port and the red lead into the V- Ωcap omega -mA port.

    For AC (e.g., wall outlets): Set the dial to the 200V or 600V setting under the VAC (wavy line) section.

    For DC (e.g., batteries): Set the dial to the appropriate range under the VDC (straight/dashed line) section. For a 12V battery, use the 20V setting.

    Touch the probe tips to the circuit. The digital display will show the voltage. Measuring Resistance ( Ωcap omega ) Craftsman digital multimeter 82082 user manual

    The Craftsman Digital Multimeter 82082 is a manual-ranging tool designed for residential electrical troubleshooting, covering AC/DC voltage, resistance, continuity, and diode tests. Rated for CAT II environments, this device utilizes specialized ports for high and low current measurements along with a data hold function. For the full operating instructions, see the user manual cdn.prod.website-files.com/65f01cf76c03552250696a1a/66e509f403cd70fb09fa11a3_57582241331.pdf. Manual Ranging MultiMeter - Sears Parts Direct