Select Type Error Samsung Tv - Dvb

While on the DVB screen:

Warning: Accessing the Service Menu can brick your TV if settings are changed incorrectly.

If the standard menu options do not fix the tuning issue, the "Type" setting in the factory service menu may be incorrect.

Typical setup: A coaxial cable coming directly from a wall plate provided by a company like Comcast (Xfinity), Spectrum, or a local co-op. Note: In the US/Canada, this is ATSC/ClearQAM, but Samsung EU models often label it as DVB-C). dvb select type error samsung tv

You should call a technician if:

The error means your TV’s tuner is set to the wrong DVB standard for your region/country.

| Region | Correct DVB Type | |--------------|------------------| | Europe, India, Africa, Australia | DVB-T (terrestrial) or DVB-T2 | | UK | DVB-T/T2 | | South America| DVB-T (some ISDB-T) | | North America | ATSC (not DVB) → mismatch likely | While on the DVB screen: Warning: Accessing the

If you’re in the US/Canada and see this, you selected DVB incorrectly.

Many users see "DVB-C" and assume "C" stands for "Country" or "Common." It does not. If you select DVB-C with a standard antenna, your TV will try to decode encrypted cable frequencies. It will fail, find zero channels, and potentially lock the tuner into "Cable Mode."

How to revert: You cannot "switch" modes without a factory reset. Go to Settings > Broadcasting > Expert Settings > Tuning Mode. Change it back to "Air" (DVB-T) or "Satellite" (DVB-S). Many users see "DVB-C" and assume "C" stands

Subject: Samsung LED/LCD/QLED Televisions Symptom: Television displays "Mode Not Supported" or "DVB Select Type Error" when attempting to change channels or access the Guide. Root Cause: Conflict between the TV's internal tuner settings and the incoming signal type (Antenna vs. Cable) or corrupted channel mapping data.

If the error persists after a reset, the issue lies in how the TV scanned for channels during setup.