Ecus Datasheet 3.0 May 2026

This section configures the standardized AUTOSAR stack.

Pin | Name | I/O | Function | Voltage/Level | Notes --- | ---: | ---:| --- | ---: | --- 1 | VBAT | PWR | Battery supply | 9–16 V nom 12V | Fused 5 A recommended 2 | GND | PWR | Chassis ground | 0 V | Single-point reference 3 | CAN_H | I/O | CAN High (J2411) | Differential | Termination 120 Ω at harness ends 4 | CAN_L | I/O | CAN Low | Differential | — ecus datasheet 3.0

| Parameter | Value | |-----------|-------| | Operating voltage | 9 – 36 V (nominal 12/24 V systems) | | Standby current | < 100 µA (sleep mode, wake via CAN/LIN) | | Max current draw | 15 A (continuous), 30 A peak (100 ms) | | Operating temperature | -40°C to +105°C (ambient), -40°C to +125°C (junction) | | Ingress protection | IP6K9K (when installed in certified enclosure) | | Vibration resistance | 10 g RMS, 20 – 2000 Hz | | Shock | 50 g, 11 ms half-sine | This section configures the standardized AUTOSAR stack

Look for these acronyms:

Datasheet 3.0 emphasizes Signal Ground vs. Power Ground separation to prevent noise interference. Look for these acronyms: Datasheet 3

One‑click transfer of key data into PCB design & simulation environments: