You are here: Home >> Resource >> How to manage MobileSync Backup Folder on your computer?

Eeupdate64e.efi May 2026

To obtain a legitimate copy, download the latest Intel® Ethernet Adapter Complete Driver Pack from Intel’s Download Center or access your server vendor’s firmware update repository.

After a successful flash, issue:

eeupdate64e.efi /NIC=1 /RESET

Then exit the UEFI Shell and reboot the server.

As Intel transitions to newer Ethernet controllers (E810, E830 series) with more secure update mechanisms (signed capsules, hardware root of trust), the direct EEPROM manipulation approach is being phased out. Intel now recommends:

However, for low-level recovery, forensics, and advanced configuration, eeupdate64e.efi will remain an essential tool in the networking professional’s toolkit for years to come.

Under the hood, eeupdate64e.efi performs the following steps:

Once in the UEFI Shell, navigate to the USB drive (fs0: or fs1:), then run:

eeupdate64e.efi /?

If the tool loads, you should see a list of detected Intel network adapters with PCI bus/device/function numbers.

eeupdate64e.efi /NIC=1 /DUMP /FILE=backup.bin

Here’s a suggestion for how you could present or describe eeupdate64e.efi in a technical or tool documentation context:

eeupdate64e.efi – Intel Ethernet Flash Update Utility (EFI)

eeupdate64e.efi is an EFI-based utility developed by Intel for updating firmware on Intel Ethernet controllers and network adapters. It is intended for use in UEFI environments, typically booted directly from a UEFI shell.

Common use cases:

Typical usage (from UEFI Shell):

Shell> fs0:
fs0:\> eeupdate64e.efi /NIC=1 /MAC=001122334455

Important notes:

Would you like this in a script header, a README, or as part of a user manual?

eeupdate64e.efi is the UEFI (Unified Extensible Firmware Interface) version of the Intel Ethernet Flash Firmware Utility Intel Community

. It is a command-line tool used by system administrators and engineers to manage, update, and program the Non-Volatile Memory (NVM) or EEPROM of Intel Ethernet network adapters Intel Community Core Functionality Firmware Updates

: Flashing or updating the NVM/EEPROM image on network interface cards (NICs) to the latest version MAC Address Management : Programming or modifying the MAC address of an adapter Intel Community Hardware Diagnostics eeupdate64e.efi

: Viewing detailed adapter information, including PCI data, vendor/device IDs, and checksum/CRC status OEM Customization

: Used for "cross-flashing" or modifying card identification (at the user's risk) to allow official Intel firmware on OEM-specific hardware Level1Techs Forums Usage and Deployment The tool is typically executed from a UEFI Shell environment, which is accessible during system boot . Common steps for use include: Preparation : Copying the eeupdate64e.efi

file and any necessary firmware images (.eep or .bin files) to a FAT32-formatted USB drive

: Booting the system into the UEFI Shell and navigating to the USB drive (often labeled as : Running the tool with specific parameters. For example, eeupdate64e.efi /NIC=1 /D image.eep

would flash a specific image to the first detected network card Availability

Intel does not typically offer this tool as a standalone public download for end-users Intel Community . It is usually distributed through: How to download eeupdate64e.efi tool ? - Intel Community

only allowed in UEFI. I saw that EFI versions of this tool is available, but I cannot get it. Intel Community How to download eeupdate64e.efi tool ? - Intel Community

The requested tool is included in the Intel(R) Network Connections Tools. It can be found when you are logged into your Resource & Intel Community Help needed to flash teh firware on Intel X710 NIC

The eeupdate64e.efi is a command-line utility from Intel designed for hardware engineers and advanced users to manage and update the Non-Volatile Memory (NVM) and EEPROM on Intel Ethernet Network Adapters. It runs within a UEFI Shell environment, making it a critical tool for systems that do not support legacy BIOS or for pre-boot hardware configuration. Key Features and Capabilities

EEPROM/NVM Management: Users can dump the current EEPROM contents to a file or flash a new NVM image to the adapter.

MAC Address Updates: Provides the ability to view and manually update the adapter's MAC address, which is useful for board design or hardware recovery.

Graphical User Interface (GUI) Mode: Unlike many strictly text-based EFI tools, it includes a /GUI flag that launches a simple interactive interface for selecting adapters and performing common tasks.

Hardware Debugging: Includes low-level commands for reading and writing raw memory registers and data, as well as checking the health and inventory of the adapter.

Cross-Flashing and Customization: Often used by enthusiasts to modify adapter firmware (e.g., making an adapter compatible with macOS) or to "cross-flash" OEM-branded cards with standard Intel firmware. Intel® Ethernet NVM Update Tool - 31.1 - ID:705831

eeupdate64e.efi utility is a command-line tool designed for the Unified Extensible Firmware Interface (UEFI) environment to manage, update, and program Intel Ethernet controllers. It is primarily used by system administrators and hardware developers to modify the Non-Volatile Memory (NVM/EEPROM) and MAC addresses of network interface cards (NICs). Intel Community Core Functionality

The utility allows for low-level interaction with Intel network hardware, supporting various tasks: MAC Address Configuration

: Directly updating or assigning unique MAC addresses to network interfaces. EEPROM/NVM Flashing : Writing raw binary images or data files ( ) to the controller’s memory. Device Identification To obtain a legitimate copy, download the latest

: Listing all connected Intel NICs and displaying their hardware details (Bus, Device, Function, Vendor ID). Checksum Verification : Testing the integrity of the flashed EEPROM and its size. Intel Community Usage Scenarios Cross-flashing

: Replacing manufacturer-specific firmware (e.g., Dell, HPE) with official Intel firmware to unlock features like specific link speeds. Manufacturing & OEM Setup

: Programming blank EEPROMs on new boards during the manufacturing process. Hardware Recovery

: Fixing abnormal NIC behavior or restoring functional parameters on corrupted network adapters. Intel Community Common Commands

The tool is executed from a UEFI shell, typically from a bootable USB drive: eeupdate64e.efi : Displays all available NICs and their IDs. eeupdate64e.efi /ALL /MAC_DUMP : Lists all MAC addresses for detected devices. eeupdate64e.efi /NIC=1 /MAC=XXXXXXXXXXXX : Updates the MAC address for a specific NIC. eeupdate64e.efi /NIC=1 /DATA .eep : Flashes a specific data file to the selected NIC. Availability and Constraints

eeupdate64e.efi is an Intel Ethernet EEPROM Update Tool designed specifically for EFI (Extensible Firmware Interface)

environments. It allows IT administrators and developers to modify, dump, and flash configuration data—such as MAC addresses and firmware images—directly to Intel Network Interface Controllers (NICs) without needing a full operating system. Key Functions Inventory & Identification

: Running the tool without arguments displays a list of all detected Intel NICs, providing details like Bus, Device, Function (BDF) numbers, and branding strings (e.g., Intel I350 Gigabit Connection). Firmware Flashing

: It is commonly used to resolve hardware issues by flashing specific (EEPROM) or binary images to a selected NIC using the (data) flags. EEPROM Dumping

: The tool can extract existing configurations to an image file using the

parameter, which is useful for creating backups or cloning card configurations. MAC Address Management

: It allows for manual updates to a card's MAC address if the original data was corrupted during a flash. Common Use Cases Server Maintenance : Used by major vendors like

to fix onboard NIC functions that become abnormal due to incorrect initial firmware. Cross-flashing

: Enthusiasts often use it to flash "official" Intel firmware onto OEM-branded cards (like Dell or Lenovo variants) to unlock specific features or generic driver compatibility.

: It is a critical tool for developers troubleshooting embedded boards (e.g., Elkhart Lake CPUs) where a NIC might be "stuck" in a specific mode like SerDes KX. Usage Warning eeupdate64e.efi

operates at a low hardware level, it carries a risk of "soft-bricking" or "hard-bricking" hardware if an incorrect firmware image is applied or if the process is interrupted. It is generally recommended for use only by those who understand the specific requirements of their network card. IBM System x3530 M4 and x3630 M4

The file eeupdate64e.efi is a 64-bit UEFI tool developed by Intel used for updating, managing, and configuring Intel Ethernet Network Adapters. It is a critical utility for IT professionals and system builders who need to modify firmware-level settings without an operating system. 🛠️ Key Capabilities After a successful flash, issue: eeupdate64e

MAC Address Modification: It is frequently used to view or manually program the Media Access Control (MAC) address of an Intel NIC.

Firmware Updates: Professionals use it to flash EEPROM or NVM (Non-Volatile Memory) images to network controllers.

Hardware Diagnostics: The tool can identify the specific NIC ID and provide status reports on the controller's health.

EEPROM Management: It allows users to dump (save) or write to the EEPROM of the network card for backup and restoration. 💻 Common Use Cases

The "story" of this file usually involves users encountering it during specialized hardware maintenance:

Cross-flashing: Enthusiasts often use it to flash generic Intel firmware onto OEM-branded cards (like Dell or Lenovo) to unlock hidden features or ensure compatibility with newer drivers (Level1Techs Forum).

Recovering "Bricked" NICs: If an on-board network card stops functioning due to a corrupted EEPROM, this tool is the primary way to restore its function (Lenovo Support).

Manufacturing: It is used on production lines to assign unique identities to newly manufactured motherboards. ⚠️ Access and Distribution

Intel does not typically offer this file as a standalone public download. It is usually bundled within the Intel Ethernet Connections Boot Utility or larger driver development kits (PDKs).

Availability: It is found in the Intel(R) Network Connections Tools documentation and software packages.

Execution: It must be run from a UEFI Shell. This requires a bootable USB drive formatted to FAT32 containing the shell environment and the file.

If you are trying to solve a specific hardware issue with this tool, I can help you with: The specific command syntax for changing a MAC address.

Instructions on how to create a bootable UEFI USB to run the tool.

Explaining the risk of "bricking" your network card if used incorrectly.

You're referring to "eeupdate64e.efi". This seems to be a specific file related to firmware updates, particularly for Intel network interface controllers (NICs) or other hardware components.

"eeupdate64e.efi" is a UEFI (Unified Extensible Firmware Interface) executable file used for updating firmware. The "64e" in the filename suggests it's designed for 64-bit UEFI systems, and it's specifically tailored for updating firmware in a UEFI environment.

Here are some key points about "eeupdate64e.efi":

If you're dealing with this file, ensure you're following proper procedures for updating firmware, as incorrect or interrupted updates can lead to hardware malfunctions. Always refer to the manufacturer's instructions and guidelines when updating firmware.

Many servers (Dell PowerEdge, HPE ProLiant, Lenovo ThinkSystem) use Intel chipsets but have custom firmware. In rare cases, you may want to convert an OEM card to Intel reference firmware to unlock advanced features—or vice versa. This utility is one of the few that can overwrite subsystem IDs and vendor-specific regions.

To obtain a legitimate copy, download the latest Intel® Ethernet Adapter Complete Driver Pack from Intel’s Download Center or access your server vendor’s firmware update repository.

After a successful flash, issue:

eeupdate64e.efi /NIC=1 /RESET

Then exit the UEFI Shell and reboot the server.

As Intel transitions to newer Ethernet controllers (E810, E830 series) with more secure update mechanisms (signed capsules, hardware root of trust), the direct EEPROM manipulation approach is being phased out. Intel now recommends:

However, for low-level recovery, forensics, and advanced configuration, eeupdate64e.efi will remain an essential tool in the networking professional’s toolkit for years to come.

Under the hood, eeupdate64e.efi performs the following steps:

Once in the UEFI Shell, navigate to the USB drive (fs0: or fs1:), then run:

eeupdate64e.efi /?

If the tool loads, you should see a list of detected Intel network adapters with PCI bus/device/function numbers.

eeupdate64e.efi /NIC=1 /DUMP /FILE=backup.bin

Here’s a suggestion for how you could present or describe eeupdate64e.efi in a technical or tool documentation context:

eeupdate64e.efi – Intel Ethernet Flash Update Utility (EFI)

eeupdate64e.efi is an EFI-based utility developed by Intel for updating firmware on Intel Ethernet controllers and network adapters. It is intended for use in UEFI environments, typically booted directly from a UEFI shell.

Common use cases:

Typical usage (from UEFI Shell):

Shell> fs0:
fs0:\> eeupdate64e.efi /NIC=1 /MAC=001122334455

Important notes:

Would you like this in a script header, a README, or as part of a user manual?

eeupdate64e.efi is the UEFI (Unified Extensible Firmware Interface) version of the Intel Ethernet Flash Firmware Utility Intel Community

. It is a command-line tool used by system administrators and engineers to manage, update, and program the Non-Volatile Memory (NVM) or EEPROM of Intel Ethernet network adapters Intel Community Core Functionality Firmware Updates

: Flashing or updating the NVM/EEPROM image on network interface cards (NICs) to the latest version MAC Address Management : Programming or modifying the MAC address of an adapter Intel Community Hardware Diagnostics

: Viewing detailed adapter information, including PCI data, vendor/device IDs, and checksum/CRC status OEM Customization

: Used for "cross-flashing" or modifying card identification (at the user's risk) to allow official Intel firmware on OEM-specific hardware Level1Techs Forums Usage and Deployment The tool is typically executed from a UEFI Shell environment, which is accessible during system boot . Common steps for use include: Preparation : Copying the eeupdate64e.efi

file and any necessary firmware images (.eep or .bin files) to a FAT32-formatted USB drive

: Booting the system into the UEFI Shell and navigating to the USB drive (often labeled as : Running the tool with specific parameters. For example, eeupdate64e.efi /NIC=1 /D image.eep

would flash a specific image to the first detected network card Availability

Intel does not typically offer this tool as a standalone public download for end-users Intel Community . It is usually distributed through: How to download eeupdate64e.efi tool ? - Intel Community

only allowed in UEFI. I saw that EFI versions of this tool is available, but I cannot get it. Intel Community How to download eeupdate64e.efi tool ? - Intel Community

The requested tool is included in the Intel(R) Network Connections Tools. It can be found when you are logged into your Resource & Intel Community Help needed to flash teh firware on Intel X710 NIC

The eeupdate64e.efi is a command-line utility from Intel designed for hardware engineers and advanced users to manage and update the Non-Volatile Memory (NVM) and EEPROM on Intel Ethernet Network Adapters. It runs within a UEFI Shell environment, making it a critical tool for systems that do not support legacy BIOS or for pre-boot hardware configuration. Key Features and Capabilities

EEPROM/NVM Management: Users can dump the current EEPROM contents to a file or flash a new NVM image to the adapter.

MAC Address Updates: Provides the ability to view and manually update the adapter's MAC address, which is useful for board design or hardware recovery.

Graphical User Interface (GUI) Mode: Unlike many strictly text-based EFI tools, it includes a /GUI flag that launches a simple interactive interface for selecting adapters and performing common tasks.

Hardware Debugging: Includes low-level commands for reading and writing raw memory registers and data, as well as checking the health and inventory of the adapter.

Cross-Flashing and Customization: Often used by enthusiasts to modify adapter firmware (e.g., making an adapter compatible with macOS) or to "cross-flash" OEM-branded cards with standard Intel firmware. Intel® Ethernet NVM Update Tool - 31.1 - ID:705831

eeupdate64e.efi utility is a command-line tool designed for the Unified Extensible Firmware Interface (UEFI) environment to manage, update, and program Intel Ethernet controllers. It is primarily used by system administrators and hardware developers to modify the Non-Volatile Memory (NVM/EEPROM) and MAC addresses of network interface cards (NICs). Intel Community Core Functionality

The utility allows for low-level interaction with Intel network hardware, supporting various tasks: MAC Address Configuration

: Directly updating or assigning unique MAC addresses to network interfaces. EEPROM/NVM Flashing : Writing raw binary images or data files ( ) to the controller’s memory. Device Identification

: Listing all connected Intel NICs and displaying their hardware details (Bus, Device, Function, Vendor ID). Checksum Verification : Testing the integrity of the flashed EEPROM and its size. Intel Community Usage Scenarios Cross-flashing

: Replacing manufacturer-specific firmware (e.g., Dell, HPE) with official Intel firmware to unlock features like specific link speeds. Manufacturing & OEM Setup

: Programming blank EEPROMs on new boards during the manufacturing process. Hardware Recovery

: Fixing abnormal NIC behavior or restoring functional parameters on corrupted network adapters. Intel Community Common Commands

The tool is executed from a UEFI shell, typically from a bootable USB drive: eeupdate64e.efi : Displays all available NICs and their IDs. eeupdate64e.efi /ALL /MAC_DUMP : Lists all MAC addresses for detected devices. eeupdate64e.efi /NIC=1 /MAC=XXXXXXXXXXXX : Updates the MAC address for a specific NIC. eeupdate64e.efi /NIC=1 /DATA .eep : Flashes a specific data file to the selected NIC. Availability and Constraints

eeupdate64e.efi is an Intel Ethernet EEPROM Update Tool designed specifically for EFI (Extensible Firmware Interface)

environments. It allows IT administrators and developers to modify, dump, and flash configuration data—such as MAC addresses and firmware images—directly to Intel Network Interface Controllers (NICs) without needing a full operating system. Key Functions Inventory & Identification

: Running the tool without arguments displays a list of all detected Intel NICs, providing details like Bus, Device, Function (BDF) numbers, and branding strings (e.g., Intel I350 Gigabit Connection). Firmware Flashing

: It is commonly used to resolve hardware issues by flashing specific (EEPROM) or binary images to a selected NIC using the (data) flags. EEPROM Dumping

: The tool can extract existing configurations to an image file using the

parameter, which is useful for creating backups or cloning card configurations. MAC Address Management

: It allows for manual updates to a card's MAC address if the original data was corrupted during a flash. Common Use Cases Server Maintenance : Used by major vendors like

to fix onboard NIC functions that become abnormal due to incorrect initial firmware. Cross-flashing

: Enthusiasts often use it to flash "official" Intel firmware onto OEM-branded cards (like Dell or Lenovo variants) to unlock specific features or generic driver compatibility.

: It is a critical tool for developers troubleshooting embedded boards (e.g., Elkhart Lake CPUs) where a NIC might be "stuck" in a specific mode like SerDes KX. Usage Warning eeupdate64e.efi

operates at a low hardware level, it carries a risk of "soft-bricking" or "hard-bricking" hardware if an incorrect firmware image is applied or if the process is interrupted. It is generally recommended for use only by those who understand the specific requirements of their network card. IBM System x3530 M4 and x3630 M4

The file eeupdate64e.efi is a 64-bit UEFI tool developed by Intel used for updating, managing, and configuring Intel Ethernet Network Adapters. It is a critical utility for IT professionals and system builders who need to modify firmware-level settings without an operating system. 🛠️ Key Capabilities

MAC Address Modification: It is frequently used to view or manually program the Media Access Control (MAC) address of an Intel NIC.

Firmware Updates: Professionals use it to flash EEPROM or NVM (Non-Volatile Memory) images to network controllers.

Hardware Diagnostics: The tool can identify the specific NIC ID and provide status reports on the controller's health.

EEPROM Management: It allows users to dump (save) or write to the EEPROM of the network card for backup and restoration. 💻 Common Use Cases

The "story" of this file usually involves users encountering it during specialized hardware maintenance:

Cross-flashing: Enthusiasts often use it to flash generic Intel firmware onto OEM-branded cards (like Dell or Lenovo) to unlock hidden features or ensure compatibility with newer drivers (Level1Techs Forum).

Recovering "Bricked" NICs: If an on-board network card stops functioning due to a corrupted EEPROM, this tool is the primary way to restore its function (Lenovo Support).

Manufacturing: It is used on production lines to assign unique identities to newly manufactured motherboards. ⚠️ Access and Distribution

Intel does not typically offer this file as a standalone public download. It is usually bundled within the Intel Ethernet Connections Boot Utility or larger driver development kits (PDKs).

Availability: It is found in the Intel(R) Network Connections Tools documentation and software packages.

Execution: It must be run from a UEFI Shell. This requires a bootable USB drive formatted to FAT32 containing the shell environment and the file.

If you are trying to solve a specific hardware issue with this tool, I can help you with: The specific command syntax for changing a MAC address.

Instructions on how to create a bootable UEFI USB to run the tool.

Explaining the risk of "bricking" your network card if used incorrectly.

You're referring to "eeupdate64e.efi". This seems to be a specific file related to firmware updates, particularly for Intel network interface controllers (NICs) or other hardware components.

"eeupdate64e.efi" is a UEFI (Unified Extensible Firmware Interface) executable file used for updating firmware. The "64e" in the filename suggests it's designed for 64-bit UEFI systems, and it's specifically tailored for updating firmware in a UEFI environment.

Here are some key points about "eeupdate64e.efi":

If you're dealing with this file, ensure you're following proper procedures for updating firmware, as incorrect or interrupted updates can lead to hardware malfunctions. Always refer to the manufacturer's instructions and guidelines when updating firmware.

Many servers (Dell PowerEdge, HPE ProLiant, Lenovo ThinkSystem) use Intel chipsets but have custom firmware. In rare cases, you may want to convert an OEM card to Intel reference firmware to unlock advanced features—or vice versa. This utility is one of the few that can overwrite subsystem IDs and vendor-specific regions.