Note: Different adjustment program versions may label actions differently; these are typical steps.
The adjustment program mentally resets the counter, but it does not evaporate ink. If you do not physically clean or replace the waste ink pads, the next reset may fail catastrophically.
For the XP-235: The waste ink pads are located under the right side of the printer (viewed from front). You will need to disassemble the case. Search for "Epson XP-235 waste pad replacement" – it involves removing 6-8 screws and swapping a felt pad. Alternatively, attach an external waste ink tank (a bottle with a tube) to the pump outlet, allowing you to reset infinitely.
Epson Adjustment Program XP-235 — Hot Install Guide
This is the "hot" part of the hot install.
If you get an error like "Communication Error", repeat Step 1 through 3. Try a different USB port on your computer (preferably USB 2.0, not 3.0).
The Epson Adjustment Program for XP 235 might seem like a niche utility for repair shops, but for the savvy home user, it is a lifestyle enabler. Installing it correctly means reclaiming control over your home entertainment production line. It transforms the printer from a disposable, frustrating gadget into a durable, long-term partner in creativity.
Remember: Use this tool ethically and only for your own device. With the right installation approach, you ensure that when inspiration strikes—whether it’s a birthday banner or a last-minute script for a family skit—your Epson XP-235 is ready to perform.
Disclaimer: This software is intended for resetting after a physical waste pad check or replacement. Use at your own discretion.
The Epson Adjustment Program (often called a "Resetter" or "Service Tool") is proprietary software designed by Epson for authorized service centers. It is not sold to the general public. This program communicates directly with the printer's EEPROM (memory chip) to perform low-level maintenance tasks, including:
For the XP 235, the most critical function is resetting the waste ink counter. Once the printer counts that its pads have absorbed a certain volume of ink, it shuts down to prevent overflow. Without the adjustment program, your printer becomes a brick.
The Epson Adjustment Program (AdjProg) for the XP-235 is a specialized service utility used primarily to resolve the "Service Required" error. This error occurs when the printer's internal waste ink pad counter reaches its limit. Core Functions
Waste Ink Pad Reset: Clears the "ink pad at the end of its service life" error. epson adjustment program xp 235 hot install
Maintenance: Includes printhead nozzle cleaning, checking ink levels, and initial ink charging.
Technical Adjustments: Allows for EEPROM data copying, printhead ID setting, and top margin or Bi-D adjustments. Installation & Execution Guide
The program is typically distributed as a compressed file by third-party providers rather than a standard installer.
Preparation: Ensure your XP-235 is connected to your PC via USB cable; wireless connections are generally not supported for this utility.
Download & Extract: Download the utility from a reputable source like Resetter.net or 2Manuals. Extract the contents using a tool like WinRAR or 7-Zip.
Run the Utility: Open the folder and run AdjProg.exe. Note that some versions may require you to disable antivirus software temporarily or run in Compatibility Mode for Windows 7/8/10.
Select Model: Click the Select button, choose XP-235 from the Model Name list, and select the specific USB port your printer is using. Perform Reset: Click Particular Adjustment Mode. Select Waste ink pad counter and click OK.
Check the box for Main pad counter, click Check to see current levels, then click Initialize to reset them to zero.
Finalize: Turn the printer off and back on again when prompted to complete the reset. Important Considerations How to Reset Epson XP235 Printer
The Epson XP-235 Adjustment Program (also known as a "Resetter") is a specialized service utility used primarily to fix the "Service Required" error caused by a full waste ink pad counter. This tool is not an official consumer product from Epson but is widely used by technicians to extend the life of the printer without requiring physical hardware service. Installation & Preparation
To use the program successfully on a Windows PC, follow these preparation steps:
Disable Antivirus: Antivirus software often flags Adjprog.exe as a false positive because it accesses hardware IDs for activation. Temporarily disable your protection before extraction. For waste‑ink counter reset:
USB Connection: Ensure the printer is connected via USB rather than Wi-Fi, as the adjustment program typically requires a direct wired connection to communicate with the printer's firmware.
Extraction: Use a tool like WinRAR to extract the downloaded file. Note that some versions may require a password (commonly "resetter123") or a paid activation key to run. Step-by-Step Usage Guide
Once the software is open, follow these steps to reset your printer:
Run the Executable: Open Adjprog.exe from your extracted folder.
Select Model: Click the "Select" button and choose XP-235 from the Model Name list. Select the corresponding USB port for your printer.
Enter Adjustment Mode: Click on "Particular Adjustment Mode". Waste Ink Reset: Find and select "Waste ink pad counter" and click OK.
Check the box for "Main pad counter" and click "Check" to see current levels.
Check the box again and click "Initialize" to reset the counter to zero.
Finalize: Turn the printer OFF and then back ON when prompted to complete the reset. Important Considerations
Physical Maintenance: Resetting the software counter does not physically clean the ink pads. If the pads are actually overflowing, they should be cleaned or replaced to prevent internal ink damage.
Compatibility: This program is designed for Windows (including Windows 10 in compatibility mode) and may not function on macOS.
Official Alternatives: For standard firmware updates or general driver issues, it is safer to use the Epson Software Updater or the WIC Reset Utility which provides similar functions with more formal support. If instructed, power cycle the printer (turn off
The Epson Adjustment Program (AdjProg) for the Epson Expression Home XP-235 is a utility primarily used to reset the Waste Ink Pad Counter when you receive a "Service Required" error. Installation & Usage Steps
Because this program is typically distributed as a third-party utility, you must follow these specific steps to ensure it runs correctly:
Preparation: Ensure your printer is connected to your computer via USB (not Wi-Fi) and is powered on.
Disable Antivirus: Many antivirus programs flag the Adjprog.exe file as a false positive. You may need to temporarily disable your antivirus or add the program to your exclusions list before extracting.
Extract the Files: Use a tool like WinRAR or 7-Zip to extract the downloaded resetter folder.
Run the Program: Right-click on Adjprog.exe and select Run as Administrator. Select Your Model: Click the Select button. Choose XP-235 from the Model Name list.
Set the Port to the one showing your printer name (e.g., USB001). Reset Process: Click Particular Adjustment Mode. Select Waste ink pad counter and click OK. Check the box for Main pad counter.
Click Check to see the current status, then click Initialize to reset the counter to zero.
Finalize: Turn off your printer, wait a few seconds, and turn it back on. The error should now be cleared. Alternative: WIC Reset Utility
If you prefer a more official or simpler process, the WIC (Waste Ink Counter) Reset Utility is another option available on sites like InkChip or WIC-Reset.com.
Ease of Use: It is often easier to install but usually requires purchasing a one-time "Reset Key".
Functions: It can also perform nozzle cleaning, printhead alignment, and read diagnostic reports. Important Maintenance Note
Resetting the software counter does not physically clean the ink pads. To prevent actual ink leakage, you should eventually physically replace or clean the waste ink pads or install an external waste ink tank. How to Reset Epson XP235 Printer