Equatech Universal Tv Wall Mount 32 To 100 Instructions Direct

Equatech mounts often include cable clips or channels. Route HDMI, power, and audio cables through the wall plate opening or along the arms. For a professional look, use an in-wall cable management kit (required for fire safety in some regions).

Lay your TV face-down on a soft, clean surface (blanket or cardboard).
Locate the four VESA mounting holes on the back of the TV.

Test which screws fit:

Attach left and right TV brackets to the back of the TV – do not tighten fully yet; keep them loose enough to slide left/right.

Most Equatech mounts have safety locking screws or security bolts at the bottom of the brackets. Install these to prevent the TV from being lifted off accidentally. equatech universal tv wall mount 32 to 100 instructions

Use the built-in tilt adjustment (if applicable) by loosening the tilt bolts, setting the angle, then re-tightening.

Equatech produces several variants:

For 100-inch TVs on full-motion mounts: Ensure the wall plate is bolted into at least 3 studs or high-grade concrete anchors. Never fully extend a 100-inch TV unless the mount is rated for dynamic weight (higher than static rating).

Your Equatech mount is designed for:

This is the most dangerous step for large TVs.