Windows 10 blocks unsigned drivers by default. The CH341 driver may be signed now, but many older versions are not. If you get an error like “Third-party INF does not contain digital signature information”, do this:
💡 You must do this only once during installation.
| Feature | Details |
|---------|---------|
| Typical Chip | CH341A |
| Windows 10 driver | WCH CH341SER (64-bit stable after signature bypass) |
| Hardware ID | VID_1A86&PID_5512 |
| Key fix | Disable driver signature enforcement + Install via SETUP.EXE |
| Alternative driver | Zadig (libusb) – but not recommended for serial mode |
If you need assistance with a specific error code or the programmer still fails after trying the above, share the exact hardware ID and error message.
EZP2010 Programmer Driver Installation for Windows 10 The EZP2010 is a high-speed USB SPI programmer widely used for reading and writing BIOS chips and various EEPROMs (24, 25, 93 series). While it was originally designed for older operating systems, it remains functional on Windows 10 if the correct driver installation process is followed. Compatibility and Challenges
Operating Systems: Supports Windows XP, Vista, 7, 8, and Windows 10 (both 32-bit and 64-bit).
The Main Hurdle: Most EZP2010 drivers are unsigned. Windows 10 strictly enforces driver signatures by default, which often prevents standard installation.
Hardware IDs: The device typically uses Silicon Labs components with the ID VID_10C4&PID_F5A0. Step-by-Step Installation Guide
Because the driver is unsigned, you must first disable Windows' security checks to complete the setup. 1. Disable Driver Signature Enforcement
This is a critical preliminary step. Without it, the driver will fail to load even if the files are correct.
EzP2010 Programmer Driver Windows 10: A Detailed Guide
The EzP2010 is a popular programmer device used for flashing and debugging various types of microcontrollers, including AVR, ARM, and others. To use the EzP2010 programmer with Windows 10, you need to install the appropriate driver. In this guide, we will walk you through the step-by-step process of installing and configuring the EzP2010 programmer driver on Windows 10.
Hardware Requirements:
Software Requirements:
Step 1: Download and Install the EzP2010 Programmer Driver
Step 2: Install the Driver using Device Manager
Step 3: Install the Driver using Zadig (Optional)
If the above method does not work, you can use Zadig to install the driver.
Step 4: Verify the Driver Installation
Step 5: Configure the EzP2010 Programmer Software
Troubleshooting Tips
Getting the EZP2010 Programmer to run on Windows 10 is notoriously tricky because the original drivers lack a valid digital signature. Modern Windows 10 (especially 64-bit versions) will block these drivers by default to protect the system. How to Install Drivers on Windows 10
To successfully install the driver, you must temporarily bypass Windows 10's security enforcement: Disable Driver Signature Enforcement from the Power menu. Navigate to Troubleshoot Advanced options Startup Settings When the list appears, press "Disable driver signature enforcement" Manual Driver Installation
Once Windows reboots in this mode, plug in your EZP2010 programmer. Device Manager
, find the "Unknown Device" (or EZP2010), right-click it, and select Update Driver "Browse my computer for drivers" and point it to your driver folder (e.g., Driver_EZP2010v3_x86_x64 Accept any warnings about the driver being unsigned. Software Setup
Download and extract the EZP2010 software (V3.0 is highly recommended for better 64-bit compatibility). Run the application; if successful, you should see "USB Link OK!" in the bottom right corner. Common Troubleshooting Tips "No programmer linked" Error
: If the software doesn't see the device, try switching to a USB 2.0 port
instead of USB 3.0, as many older programmers struggle with the newer standard. Firmware Updates
: If your software version is newer than the device firmware, use the "Update" button within the EZP2010 application to flash the latest firmware to the programmer itself. Driver Availability
: If you don't have the original disc, working driver packages can often be found on community forums like the ASUS ROG Forum or driver databases like DriverIdentifier Capabilities & Limits
is a classic high-speed USB SPI programmer used primarily for reading and writing BIOS chips (25 Flash), EEPROMs (24, 25, 93 series), and other memory chips. Setting it up on Windows 10 typically requires manually installing the driver since it often appears as an "Unknown Device". Installation Guide for Windows 10
To get your EZP2010 working on modern Windows systems, follow these steps: Disable Driver Signature Enforcement
: Windows 10/11 may block the driver because it is unsigned. You may need to restart your PC in "Disable Driver Signature Enforcement"
mode (found under Advanced Startup settings) to allow the installation. Connect the Device : Plug the EZP2010 into a USB 2.0 port. Update Driver via Device Manager Right-click the button and select Device Manager Look for an "Unknown device" under Other devices Right-click it and choose Update Driver Browse my computer for driver software
Point the search to the driver folder provided with your device or downloaded from a reputable source like DriverIdentifier Confirm Installation
: Once installed, the device should appear under "Universal Serial Bus controllers" or "Ports (COM & LPT)" depending on the specific driver version used. AliExpress Key Specifications : USB 2.0 with speeds up to
: Can read an EN25T80 chip in ~3 seconds and write in ~9 seconds. : Full system support for Windows 10 and 11 (32-bit and 64-bit). Ezp2010 Programmer Driver Windows 10
: Automatic chip identification, offline copying (without a PC), and 1.8V low-voltage chip support (on some "V" versions). AliExpress Usage Tips PC BIOS FLASH EZP 2010 PC BIOS FLASH EZP 2010 Albi Computers
The EZP2010 High-Speed USB Programmer Go to product viewer dialog for this item.
often faces driver compatibility issues on Windows 10 because the original drivers are unsigned. To get it working, you must bypass Windows signature enforcement or use updated driver packages. 🛠️ Step 1: Disable Driver Signature Enforcement
Windows 10 blocks unsigned drivers by default. You must temporarily disable this to install the EZP2010 driver. Click Start > Settings > Update & Security.
Select Recovery and click Restart now under "Advanced startup."
Choose Troubleshoot > Advanced options > Startup Settings > Restart.
After the reboot, press 7 or F7 to "Disable driver signature enforcement." 📥 Step 2: Download and Install Drivers
Since the official manufacturer site is often unavailable, most users rely on community-verified archives.
Locate Drivers: Look for "EZP2010 Driver Pack" on repositories like GitHub or specialized electronics forums like EEVblog. Manual Install : Connect the to your USB port. Open Device Manager (Right-click Start > Device Manager). Find the "Unknown Device" (likely under "Other devices").
Right-click it > Update driver > Browse my computer for drivers. Select the folder containing the downloaded .inf files. 🖥️ Step 3: Software Compatibility
The original EZP2010 software version 3.0 or earlier may crash on Windows 10.
Run as Administrator: Right-click the .exe file and select Run as administrator.
Compatibility Mode: Right-click the app > Properties > Compatibility > Run this program in compatibility mode for Windows 7.
Modern Alternative: Many users find better success using ASPIRE or SkyGZ software versions specifically patched for 64-bit systems. ⚠️ Troubleshooting Tips
USB 2.0 vs 3.0: This programmer is older; try a USB 2.0 port if the device isn't recognized in a blue USB 3.0 port.
Chip Detection: If the software opens but won't detect your BIOS chip, ensure the chip is oriented correctly in the ZIF socket (pin 1 near the lever).
Cable Check: Use a high-quality USB-B cable, as the programmer is sensitive to voltage drops.
📍 Key Point: Once Windows restarts normally, signature enforcement re-enables, but the installed driver will remain active. If you're having trouble finding a specific download link, Find a video walkthrough for the installation process? Windows 10 blocks unsigned drivers by default
Provide a list of alternative software that supports the EZP2010 hardware?
Installing the EZP2010 High-Speed Programmer on Windows 10 requires a specific workaround because the device lacks officially signed drivers for modern 64-bit operating systems. To successfully install it, you must temporarily disable Driver Signature Enforcement Step 1: Disable Driver Signature Enforcement
Windows 10 security settings prevent the installation of unsigned drivers by default. Use these steps to bypass this: Start menu and select (gear icon). Navigate to Update & Security Advanced startup Restart now Once the PC restarts into the blue menu, select: Troubleshoot Advanced options Startup Settings
After the next restart, a list of options will appear. Press "Disable driver signature enforcement" Step 2: Driver Installation
Once your PC boots back up with signature enforcement disabled, you can install the driver:
The is a legacy high-speed USB programmer used for flashing BIOS and EEPROM chips. While it is widely available, its age makes Windows 10 compatibility a challenge, often requiring manual driver overrides. 💻 Windows 10 Driver Status
was originally designed for 32-bit systems (XP/Win7). To make it work on Windows 10 64-bit, you must bypass modern security protocols.
Driver Signature Enforcement: Windows 10 will block the driver by default because it lacks a modern digital signature.
Installation Fix: You must restart Windows into "Disable Driver Signature Enforcement" mode (Option 7 in Startup Settings) before the driver will install correctly.
Device Manager: Once signature enforcement is off, you typically update the driver manually by selecting "Browse my computer" and pointing to the driver folder. 🛠️ Key Performance Features
Chip Support: Handles 24, 25, and 93 series EEPROM and SPI Flash chips.
Speed: USB 2.0 interface; however, it is significantly slower (~12 KB/s) than newer models.
Offline Copying: Features a standalone mode to copy chips without a PC, though this can be prone to timing errors.
Auto-Detection: Can automatically identify many 25-series chips, but 24 and 93 series often require manual selection.
Disable Driver Signature Enforcement permanently – risky but effective.
To revert: bcdedit /set testsigning off
Most Ezp2010 units use the CH341A chip (by WCH) or a clone. Some early versions used FTDI chips.
Below are three reliable methods to install the EZP2010 programmer driver on Windows 10. Method 1 (Zadig) is recommended for most users. 💡 You must do this only once during installation