Gorenje Wa 50050 Manual May 2026

A: You are using too much detergent. The WA 50050 works best with low-sudsing (HE) detergent. For soft water, use 50% of the manufacturer's recommended amount.

| Symptom | Likely Cause | Action | |---------|--------------|--------| | Machine won’t start | Door not closed, no power, dial not pulled | Close door firmly, check socket, pull start dial | | No water inlet | Tap closed, filter blocked, low pressure | Open tap, clean inlet filter | | Drum not moving | Belt broken, overloaded | Reduce load, call service for belt | | Excessive vibration | Transport bolts still in, machine not level | Remove bolts, adjust feet | | Water not draining | Pump filter blocked, drain hose kinked | Clean filter, check hose | | Door won’t open after cycle | Rinse hold active, water inside | Run “Drain” or “Spin” programme | | Detergent residue in drum | Wrong programme for cold water | Use liquid detergent or warm wash |

1. Technical Specifications

2. Installation Guide

3. Detergent Drawer (Left to Right)

4. Control Panel Overview

5. Program Table (Recommended) | Program | Max Load | Temp | Description | | :--- | :--- | :--- | :--- | | Cotton | 5.0 kg | 40-60°C | Heavily soiled bed linen, towels, underwear. | | Synthetics | 2.5 kg | 30-40°C | Blouses, shirts (polyester/cotton blend). | | Delicates | 2.0 kg | 30°C | Curtains, fine lace, silk. | | Wool | 1.5 kg | Cold-30°C | Machine-washable wool (check garment label). | | Quick 15' | 2.0 kg | Cold-30°C | Lightly worn, fresh clothes. | | Rinse + Spin | 5.0 kg | - | Extra rinse cycle for detergent residue. |

6. How to Use

7. Maintenance & Cleaning

Detergent Drawer: Remove drawer by pressing the release catch. Rinse under warm water.

Drum Cleaning: Run an empty 90°C Cotton cycle with a cup of white vinegar or drum cleaner once a month.

9. Error Codes (Display)

Important Safety Reminders:

For original spare parts or specific service, visit your local Gorenje authorized service center.

The Gorenje WA 50050 is a reliable, user-friendly washing machine designed for efficient home laundry care. To keep your machine running smoothly and ensure your clothes get the best treatment, it is essential to follow the guidelines provided in the Gorenje User Manual.

Below is a breakdown of the most critical operational and maintenance tips for the WA 50050. Getting Started: Installation and Safety

Leveling the Machine: Ensure your washing machine is stable. You can adjust the height by rotating the feet (typically using a No. 32 spanner) and then tightening the jam nuts to secure them in place.

Temperature Precautions: Avoid installing the machine in rooms where temperatures can drop below , as freezing water can damage internal components.

Power and Water: After installation, let the machine stand for at least two hours before connecting it to the power mains to allow it to reach room temperature. Always use a grounded outlet and avoid extension cords. Operating Your WA 50050

Prepare the Laundry: Sort clothes by fabric type (cotton, synthetic, delicate, wool), color, and soil level.

Pro Tip: Turn items like trousers and t-shirts inside out to protect the fabric and ensure a more thorough wash.

Load Correctly: Spread clothes evenly in the drum and avoid overloading. Overloading can lead to less effective cleaning.

Select a Program: Use the program selector knob to choose the appropriate cycle based on your laundry type. Gorenje Wa 50050 Manual

Manual Wash: For extremely delicate items like silk or wool, use the "Manual Wash" program, which features a gentle spin (max 400 RPM).

Start the Wash: Press the Start/Pause button to begin. If you need to add a forgotten item, some models allow you to pause by holding the button for three seconds. Routine Maintenance and Troubleshooting Keeping your machine clean is key to its longevity: User Manual - Gorenje

Rating: 4.5/5

Review:

I've been using the Gorenje WA 50050 washing machine for a few months now, and I'm impressed with its performance. The manual is straightforward and easy to understand, making it simple to get started with the appliance.

The design of the washing machine is sleek and modern, fitting perfectly into my laundry room. The controls are intuitive, and I appreciate the various cycle options available, including delicate, normal, and heavy-duty washes.

The machine's energy efficiency is also noteworthy, as it seems to be using less power and water compared to my previous washing machine. The noise level is relatively low, especially during the spin cycle.

One of the standout features of the Gorenje WA 50050 is its large capacity drum, which can handle bigger loads with ease. The detergent drawer is also well-designed, making it easy to add and remove detergent.

My only minor complaint is that the manual could benefit from more detailed troubleshooting tips, as I had to consult online resources to resolve a minor issue with the machine.

Pros:

Cons:

Recommendation:

Overall, I highly recommend the Gorenje WA 50050 washing machine to anyone in the market for a reliable and efficient appliance. With its user-friendly design, robust features, and eco-friendly performance, it's an excellent choice for households of all sizes.

Rating Breakdown:

Additional Comments:

If you're looking for a washing machine that's easy to use, efficient, and reliable, the Gorenje WA 50050 is definitely worth considering. The manual is a great resource to get started, and the machine's features and performance make it a great value for the price.

For the Gorenje WA 50050, the official user manual and specialized service guides provide the necessary instructions for installation, operation, and maintenance. Manuals & Technical Resources

Official User Manual: Detailed guide covering safety, installation (leveling with a No. 32 spanner), and program selection. View the User Manual (PDF) or browse the Gorenje Support Page for specific language versions.

Service & Repair Manual: For technical repairs, electrical schematics, and component disassembly, you can use the WA50050 Service Manual from Elektrotanya.

Multilingual Guide: A version of the manual including regional instructions (e.g., Serbian) is available on Scribd. Key Installation & Safety Tips

Stability: The machine must be placed on a concrete base that is clean and dry to prevent sliding. A: You are using too much detergent

Leveling: Use a No. 32 spanner to rotate the feet and a No. 17 wrench to fasten the counter-nuts. This minimizes noise and vibration.

Temperature: Do not install in rooms where the temperature drops below 5°C, as freezing water can damage internal parts.

Acclimatization: After moving or installing, let the machine stand for two hours before connecting to power to allow it to reach room temperature. Common Troubleshooting Codes

If your machine displays an error, these are the most frequent codes for Gorenje washers:

F3: Issues with water supply or pressure; check the intake valve and connections.

E7: Water level is not falling; typically caused by a clogged or damaged pump.

F8: The engine is not reaching the set speed, often due to a motor or control module malfunction. E09: Water level sensor error. Maintenance Essentials

Filter Cleaning: Regularly clean the pump filter located behind the small access door on the bottom front to prevent drainage errors.

Drum Care: To remove residues and maintain hygiene, run a dedicated drum cleaning program with a mild detergent. User Manual - Gorenje

The Gorenje WA 50050 is a versatile, front-loading washing machine designed for efficiency and ease of use in residential households. This guide summarizes the essential operational and maintenance information found in the official Gorenje User Manuals. Core Specifications

features standard dimensions to fit most kitchen or laundry layouts. Dimensions (W x H x D): 600 mm x 850 mm x 600 mm.

Maximum Load Capacity: Typically 6 kg or 7 kg, depending on the specific model variation. Power: 2300 W at a nominal voltage of 230 V.

Water Pressure Requirements: Minimum 0.05 MPa to maximum 0.8 MPa (0.5–8 bar). Installation & First Use

Before operating the machine for the first time, specific preparation is required to prevent mechanical failure:

Remove Transport Brackets: You must remove these before the first use; failure to do so can cause irreparable damage to the machine.

Leveling: Place the unit on a solid concrete floor and use a spanner to adjust the feet until it is perfectly horizontal to minimize vibrations.

Hose Connection: Use only new water inlet hoses and gaskets. The drain hose must be mounted at a height between 60 cm and 100 cm.

Initial Cleaning: It is recommended to run a Cotton 90°C or Drum Clean program without any laundry to clear manufacturing residues. Operating Programs User Manual - Gorenje

The Gorenje WA 50050 is a classic, front-loading washing machine known for its durability and straightforward operation. Whether you've just acquired a second-hand unit or need to troubleshoot a long-standing appliance, having the right manual information is crucial for maintaining performance and safety. 1. Key Technical Specifications

Understanding the limits of your machine prevents common issues like motor overheating or poor wash quality.

Capacity: Typically designed for loads between 5 kg and 6 kg (check your specific rating plate). | Symptom | Likely Cause | Action |

Dimensions: Approximately 600 mm (W) x 600 mm (D) x 850 mm (H).

Spin Speed: Usually up to 500–1000 RPM, depending on the specific sub-model.

Power Supply: 230 V, 50 Hz, with a power consumption around 2000 W. 2. Setup and Installation

Before using the machine for the first time, or after moving it, follow these critical steps:

Remove Transport Blocking Rods: You must remove the transport bolts on the back before use. Operating the machine with them attached can cause severe, non-warranty damage.

Levelling: Use a spanner to adjust the feet until the machine is perfectly level. This prevents excessive vibration and "walking" during the spin cycle.

Water Connection: Ensure the water pressure is between 0.05 and 0.8 MPa. Use only new hoses to prevent leaks. 3. Operating Guide: Step-by-Step WA50050 Manual PDF - Scribd

Gorenje WA 50050 is a versatile, front-loading washing machine designed for efficient domestic use, typically featuring a 5 kg to 6 kg load capacity depending on the specific regional model. 1. Key Technical Specifications Dimensions : Approximately 600 mm (W) x 440–600 mm (D) x 850 mm (H).

: Standard models support a maximum load of 5 kg, 5.5 kg, or 6 kg.

: Rated at 2000 W–2300 W, requiring a standard 230 V, 50 Hz power supply with a 10 A fuse. Water Pressure

: Operates within a range of 0.05 MPa to 0.8 MPa (approx. 0.5–8 bar). 2. Installation Essentials Remove Transport Brackets

: It is critical to remove the transport blocking rods located at the back of the machine before its first use. Failing to do so can cause severe mechanical damage that is not covered by the warranty.

: Place the appliance on a stable, hard, and level floor (concrete is preferred to reduce vibration). Use the adjustable feet and a wrench to level the machine, ensuring the lock nuts are tightened firmly against the bottom. Water Connection

: Use a new water inlet hose with the provided gaskets. Attach the straight end to the water tap and the angled end to the machine. Ensure the drain hose is positioned at a height between 60 cm and 100 cm for proper discharge. 3. Operating Guide & Washing Programs

The control panel typically includes a program selector knob and a "Start/Pause" button. WA50050 Manual PDF - Scribd

The Gorenje WA 50050 is a 5-6 kg capacity front-loading washing machine operating at 230V, featuring a, 90°C cotton cycle, quick 40-minute program, and specialized manual/hand wash settings. Key maintenance involves removing transport rods, regular cleaning of the drain pump filter, and utilizing a monthly 90°C cycle to ensure optimal performance. For the full, detailed instructions, visit USER MANUAL - Gorenje

Gorenje WA 50050 is a front-loading washing machine with a 5 kg capacity and a 500 RPM maximum spin speed. While the full physical manual is often sought as a PDF, key operational "pieces" of information from the manual include setup, error code interpretations, and common maintenance procedures. Elektrotanya Core Maintenance & Parts

Regular upkeep involves checking specific components that may need replacement over time: Door Seal (Gasket):

Prevents leaks from the front door. Generic Gorenje seals are available from retailers like Gorenje Spares Drain Pump:

Responsible for removing water. A common compatible part is the Askoll M108 25W pump Carbon Brushes: Worn brushes can cause motor failure or "no spin" issues. Pump Filter:

Located at the bottom front behind a cover; it should be cleaned regularly to prevent drainage errors. USER MANUAL - Gorenje

The final pages of the manual contain warranty conditions. For the Gorenje WA 50050 (European model typically):

To file a claim, you must provide: