The unlikely gang of unwitting, time-travelling criminals is back in action, following Non ci resta che il crimine (2019) and Ritorno al crimine (2021), directed by Massimiliano Bruno. Their goal in this third film is to return to 1943, to the days preceding 8 September, and steal Leonardo da Vinci’s most famous painting, the Mona Lisa, from the French. In their travels they meet famous characters and stumble into real historical events in an Italy overwhelmed by WWII.
By the end of the fast animated opening sequences, over the film titles, the gang has already stolen the Mona Lisaand is now by the aqueduct of ancient Monterano. Everything seems to be going well, the three prepare to return to the present-day with their haul. The time-travel portal is located in Camogli, however it will not be simple to travel through Italy in the chaotic aftermath of the armistice, amidst Nazis, Fascists and partisan fighters (“they haven’t built the A1 motorway yet!”).
The Fascist party headquarters where Moreno (Marco Giallini) and Claudio (Giampaolo Morelli) are taken after blowing up a bridge on the orders of Sandro Pertini (Rolando Ravello) and his group of partisans is Villa D’Antoni Varano, in via Barengo 182, northwest of Rome. King Victor Emanuel is expected to arrive at the Castle of Crecchio, actually Brancaccio Castle in San Gregorio da Sassola, to the east of Rome.
As the story unfolds, the band’s priority is to help Adele (Carolina Crescentini) rescue her daughter, Monica, the child who will become Moreno’s mother, from a Nazi ship travelling to Naples. On a beach in Bacoli, near the Marina Grande dock, Claudio improvises a conversation in pure Neapolitan dialect to find out if the ship has docked: the headquarters of the Nazi army in Naples is actually the Castle of Santa Severa, in the Macchiatonda Nature Reserve, on the Lazio coastline north of Rome. On the beach there the Germans organize a firing squad and an unlikely battle between Nazis and the Magliana Gang breaks out.
The production also shot in Cerreto di Spoleto and on part of the disused Spoleto-Norcia trainline in Umbria.
The unlikely gang of unwitting, time-travelling criminals is back in action, following Non ci resta che il crimine (2019) and Ritorno al crimine (2021), directed by Massimiliano Bruno. Their goal in this third film is to return to 1943, to the days preceding 8 September, and steal Leonardo da Vinci’s most famous painting, the Mona Lisa, from the French. In their travels they meet famous characters and stumble into real historical events in an Italy overwhelmed by WWII.
By the end of the fast animated opening sequences, over the film titles, the gang has already stolen the Mona Lisaand is now by the aqueduct of ancient Monterano. Everything seems to be going well, the three prepare to return to the present-day with their haul. The time-travel portal is located in Camogli, however it will not be simple to travel through Italy in the chaotic aftermath of the armistice, amidst Nazis, Fascists and partisan fighters (“they haven’t built the A1 motorway yet!”).
The Fascist party headquarters where Moreno (Marco Giallini) and Claudio (Giampaolo Morelli) are taken after blowing up a bridge on the orders of Sandro Pertini (Rolando Ravello) and his group of partisans is Villa D’Antoni Varano, in via Barengo 182, northwest of Rome. King Victor Emanuel is expected to arrive at the Castle of Crecchio, actually Brancaccio Castle in San Gregorio da Sassola, to the east of Rome.
As the story unfolds, the band’s priority is to help Adele (Carolina Crescentini) rescue her daughter, Monica, the child who will become Moreno’s mother, from a Nazi ship travelling to Naples. On a beach in Bacoli, near the Marina Grande dock, Claudio improvises a conversation in pure Neapolitan dialect to find out if the ship has docked: the headquarters of the Nazi army in Naples is actually the Castle of Santa Severa, in the Macchiatonda Nature Reserve, on the Lazio coastline north of Rome. On the beach there the Germans organize a firing squad and an unlikely battle between Nazis and the Magliana Gang breaks out.
The production also shot in Cerreto di Spoleto and on part of the disused Spoleto-Norcia trainline in Umbria.
Copyright: ph: Samanta Dalla Longa
Marco Giallini, Carolina Crescentini, Gianmarco Tognazzi, Giampaolo Morelli
Copyright: ph: Samanta Dalla Longa
Gianmarco Tognazzi, Carolina Crescentini
Copyright: ph: Samanta Dalla Longa
Marco Giallini, Giampaolo Morelli
Copyright: ph: Samanta Dalla Longa
Marco Giallini, Gianmarco Tognazzi
Copyright: ph: Samanta Dalla Longa
Massimiliano Bruno, Giulia Bevilacqua
Copyright: Sky
Massimiliano Bruno
Copyright: Sky
Giampaolo Morelli, Marco Giallini, Carolina Crescentini, Gianmarco Tognazzi
Copyright: ph: Samanta Dalla Longa
Gianmarco Tognazzi, Giampaolo Morelli, Marco Giallini
Grub4DOS is a descendant of the GNU Grand Unified Bootloader (GRUB), heavily modified to run on DOS and Windows-based systems. Its superpower is the ability to boot a vast range of operating systems directly from hard drives, USB sticks, or even disk images—including Linux, DOS, Windows (XP through 10 on BIOS), and recovery ISOs.
The "64-bit" designation here can be misleading—Grub4DOS itself operates in 16-bit and 32-bit real/protected modes. However, the Installer 1.1 (64-bit) refers to the Windows GUI tool that installs the bootloader onto a disk or USB drive from a 64-bit Windows environment (Vista, 7, 8, 10, or 11 under legacy BIOS boot mode).
Key features of this installer version include:
Grub4dos Installer 1.1 (often referred to as grubinst 1.1) is a legacy Windows-based GUI utility designed to install the GRUB4DOS bootloader to the Master Boot Record (MBR) or partition boot sector of a drive. While the installer itself is a 32-bit executable (grubinst_gui.exe), it remains compatible with 64-bit Windows environments for managing boot sectors on local hard drives and USB flash media. Key Technical Capabilities
Multi-OS Booting: It facilitates booting a wide range of operating systems including DOS, Windows (9x through Vista/7/10), and Linux.
Flexible Deployment: The utility can write boot code to various targets, such as the MBR of a hard disk, the boot sector of a specific partition, or a floppy disk image file.
Dynamic Scanning: Once installed, the boot code looks for the grldr file (the main GRUB4DOS engine) in the root of all local partitions, allowing for a portable boot configuration that isn't tied to a fixed disk location. grub4dos installer 1.1 64 bit
Advanced Features: It includes built-in BIOS disk emulation and an ATAPI CD-ROM driver, which are critical for legacy system recovery and specialized multiboot setups. GRUB4DOS and WINGRUB download | SourceForge.net
Since "Grub4Dos Installer 1.1" is a very specific, older legacy tool (likely a variant of the standard Grub4Dos Installer packaged for convenience), finding official documentation for that exact incremental version can be difficult. However, the functionality remains consistent across versions.
Below is a technical write-up and user guide for Grub4Dos Installer (64-bit), tailored to help you understand its purpose, compatibility, and usage.
Grub4Dos Installer 1.1 (64-bit) is a lightweight bootloader installer for x86_64 systems that brings GRUB-compatible functionality with flexible configuration and support for many filesystems and image types. This post explains what it is, why you might use it, how to install and configure it safely, common use cases, troubleshooting tips, and best practices.
Older Grub4Dos versions struggled with large NTFS volumes. Version 1.1 includes improved NTFS driver (64-bit clean). Use:
map --mem /path/to/large.iso (hd32)
map --hook
chainloader (hd32)
Despite being old, Grub4Dos is still the king of "Do anything." It can boot ISOs via mapping, chainload other loaders, and access hardware directly in ways newer tools sometimes can't. Grub4DOS is a descendant of the GNU Grand
Has anyone else had success using the 1.1 installer on Windows 11 23H2? Let me know if you encounter any specific driver blocking issues.
Cheers.
Tags: #Grub4Dos #Multiboot #USB #LegacyBoot #Windows11
Grub4Dos Installer 1.1 a legacy Windows-based utility used to install the
(Grub for DOS) bootloader to the Master Boot Record (MBR) or partition boot record of a hard drive or USB flash disk
. While it was a staple tool for creating multiboot systems in the early 2010s, it has largely been superseded by modern tools like Key Highlights & Features Simple GUI Grub4Dos Installer 1
: Provides a straightforward graphical interface for users who want to avoid the command line. Broad Compatibility
: Designed primarily for Windows 2000, XP, and Vista, but often used on Windows 7 for legacy BIOS systems.
: It is a tiny, standalone "gem" that requires no formal installation on the host OS. Legacy Focus
: Effectively handles MBR installation for DOS, Windows, and Linux multi-boot configurations. User Feedback Summary Grub4dos Error Numbers - Easy2Boot
Use mkisofs or ImgBurn with a floppy emulation boot image:
mkisofs -R -b grldr -no-emul-boot -boot-load-size 4 -o grubcd.iso folder_contents/
In an era where UEFI and GPT have become the standard, a surprising number of users still rely on the older BIOS and MBR systems—either for legacy hardware, industrial machines, or multi-boot setups with vintage operating systems. Enter Grub4DOS Installer 1.1 (64-bit), a specialized tool that brings new life to an aging, yet powerful, bootloader.
Grub4DOS is a descendant of the GNU Grand Unified Bootloader (GRUB), heavily modified to run on DOS and Windows-based systems. Its superpower is the ability to boot a vast range of operating systems directly from hard drives, USB sticks, or even disk images—including Linux, DOS, Windows (XP through 10 on BIOS), and recovery ISOs.
The "64-bit" designation here can be misleading—Grub4DOS itself operates in 16-bit and 32-bit real/protected modes. However, the Installer 1.1 (64-bit) refers to the Windows GUI tool that installs the bootloader onto a disk or USB drive from a 64-bit Windows environment (Vista, 7, 8, 10, or 11 under legacy BIOS boot mode).
Key features of this installer version include:
Grub4dos Installer 1.1 (often referred to as grubinst 1.1) is a legacy Windows-based GUI utility designed to install the GRUB4DOS bootloader to the Master Boot Record (MBR) or partition boot sector of a drive. While the installer itself is a 32-bit executable (grubinst_gui.exe), it remains compatible with 64-bit Windows environments for managing boot sectors on local hard drives and USB flash media. Key Technical Capabilities
Multi-OS Booting: It facilitates booting a wide range of operating systems including DOS, Windows (9x through Vista/7/10), and Linux.
Flexible Deployment: The utility can write boot code to various targets, such as the MBR of a hard disk, the boot sector of a specific partition, or a floppy disk image file.
Dynamic Scanning: Once installed, the boot code looks for the grldr file (the main GRUB4DOS engine) in the root of all local partitions, allowing for a portable boot configuration that isn't tied to a fixed disk location.
Advanced Features: It includes built-in BIOS disk emulation and an ATAPI CD-ROM driver, which are critical for legacy system recovery and specialized multiboot setups. GRUB4DOS and WINGRUB download | SourceForge.net
Since "Grub4Dos Installer 1.1" is a very specific, older legacy tool (likely a variant of the standard Grub4Dos Installer packaged for convenience), finding official documentation for that exact incremental version can be difficult. However, the functionality remains consistent across versions.
Below is a technical write-up and user guide for Grub4Dos Installer (64-bit), tailored to help you understand its purpose, compatibility, and usage.
Grub4Dos Installer 1.1 (64-bit) is a lightweight bootloader installer for x86_64 systems that brings GRUB-compatible functionality with flexible configuration and support for many filesystems and image types. This post explains what it is, why you might use it, how to install and configure it safely, common use cases, troubleshooting tips, and best practices.
Older Grub4Dos versions struggled with large NTFS volumes. Version 1.1 includes improved NTFS driver (64-bit clean). Use:
map --mem /path/to/large.iso (hd32)
map --hook
chainloader (hd32)
Despite being old, Grub4Dos is still the king of "Do anything." It can boot ISOs via mapping, chainload other loaders, and access hardware directly in ways newer tools sometimes can't.
Has anyone else had success using the 1.1 installer on Windows 11 23H2? Let me know if you encounter any specific driver blocking issues.
Cheers.
Tags: #Grub4Dos #Multiboot #USB #LegacyBoot #Windows11
Grub4Dos Installer 1.1 a legacy Windows-based utility used to install the
(Grub for DOS) bootloader to the Master Boot Record (MBR) or partition boot record of a hard drive or USB flash disk
. While it was a staple tool for creating multiboot systems in the early 2010s, it has largely been superseded by modern tools like Key Highlights & Features Simple GUI
: Provides a straightforward graphical interface for users who want to avoid the command line. Broad Compatibility
: Designed primarily for Windows 2000, XP, and Vista, but often used on Windows 7 for legacy BIOS systems.
: It is a tiny, standalone "gem" that requires no formal installation on the host OS. Legacy Focus
: Effectively handles MBR installation for DOS, Windows, and Linux multi-boot configurations. User Feedback Summary Grub4dos Error Numbers - Easy2Boot
Use mkisofs or ImgBurn with a floppy emulation boot image:
mkisofs -R -b grldr -no-emul-boot -boot-load-size 4 -o grubcd.iso folder_contents/
In an era where UEFI and GPT have become the standard, a surprising number of users still rely on the older BIOS and MBR systems—either for legacy hardware, industrial machines, or multi-boot setups with vintage operating systems. Enter Grub4DOS Installer 1.1 (64-bit), a specialized tool that brings new life to an aging, yet powerful, bootloader.