H-ig41-uatx Rev 1.1 Manual
The complete story ends with the manual being archived by enthusiasts:
If you actually need step-by-step setup instructions, BIOS settings explanation, or front panel connector diagram, let me know — I’ll provide them as a clear technical “manual” rather than a story.
The HP/Foxconn H-IG41-uATX (Rev 1.1) Go to product viewer dialog for this item.
, also known by its internal HP name Eton, is a micro-ATX motherboard commonly found in HP and Compaq desktop PCs like the Compaq 500B. It is built on the Intel G41 Express chipset and supports the LGA 775 socket for Intel processors. 🛠️ Technical Specifications
This board is designed for budget and office use, featuring standard connectivity for its era: h-ig41-uatx rev 1.1 manual
Processor Support: Intel Core 2 Quad, Core 2 Duo, Dual Core, and Pentium processors (LGA 775).
Memory: Two DDR3 DIMM slots supporting up to 4 GB of total RAM (2x 2GB modules). Type: PC3-10600 (1333 MHz) or PC3-8500 (1066 MHz). Voltage: 1.5V non-ECC unbuffered memory. Expansion Slots: 1x PCI Express x16 (for dedicated graphics). 2x PCI Express x1. 1x PCI (32-bit). 1x Mini PCI (typically for wireless cards). Storage: 4x SATA II (3.0 Gb/s) ports.
Networking: Realtek RTL8103E/EL Fast Ethernet (10/100 Mbps). Audio: Realtek ALC662 High Definition Audio. 🔌 Internal Headers & Connectors
Locating headers on this board is critical for case swaps or repairs: Initial configuration:
Front Panel Header (F-PANEL): A 9-pin block used for the power button, reset switch, and status LEDs.
USB Headers: Two internal USB 2.0 headers, each supporting up to two additional ports.
Audio Header: A 9-pin yellow header for front-panel headphone and microphone jacks.
Power Supply: Requires a standard 24-pin ATX main power connector and a 4-pin ATX 12V CPU power connector. The complete story ends with the manual being
Fan Headers: One 4-pin CPU fan header and one 3-pin system (rear) fan header. 🖥️ Rear I/O Ports The back panel provides the following connections: H-IG41-uATX Rev: 1.1 Motherboard
This is a user guide for the H-IG41-uATX (Rev 1.1) motherboard. This model is an older LGA775 board, typically manufactured by Foxconn (often sold under brands like HP or Compaq in prebuilt systems like the Pavilion a6000 series).
Since an official manual can be hard to find, this guide consolidates the essential specifications, jumper settings, and connector pinouts based on the board’s actual layout.
Most users today cannot find the official manual. Here’s why:
Consequently, the “story” becomes one of reverse engineering: users rely on: