| Feature | Details | |---------|---------| | Form Factor | microATX (24.4cm x 24.4cm approx.) | | Chipset | Intel B360 (most common) | | CPU Socket | LGA 1151 (supports 8th & 9th Gen Intel Core, Pentium, Celeron) | | RAM | 2 x DDR4 DIMM slots, up to 32GB, 2666MHz (max) | | Expansion Slots | 1 x PCIe x16, 1 x PCIe x1, 1 x M.2 (for SSD, key M) | | Storage | 2 x SATA 6Gb/s | | Rear I/O | 4 x USB 3.1 Gen1, 2 x USB 2.0, RJ45, audio jacks, VGA, HDMI (varies by config) | | Power Connectors | 24-pin main + 4-pin CPU (proprietary pinout possible) |
The LGA 1151 socket on the HP 18E7 is the revised LGA1151 for Coffee Lake (8th and 9th Gen Intel). It will not work with 6th/7th Gen Skylake or Kaby Lake CPUs due to different pinouts and power delivery requirements.
| Feature | Details | |--------|---------| | Standard PC case? | ❌ No – mounting holes and I/O shield are custom | | Standard PSU? | ❌ No – uses external 19.5V adapter | | Standard GPU? | ❌ No – PCIe slot is x16 physical but x4 electrical, low power only | | Standard RAM? | ❌ No – needs DDR4 SODIMM (laptop RAM) | | Windows support | Windows 10/11 (64-bit only) | hewlett-packard 18e7 motherboard specs
The HP 18E7 features 4 x 288-pin DDR4 DIMM slots supporting up to 64GB (4 x 16GB).
| RAM Parameter | Detail | |----------------|---------| | Type | DDR4 Unbuffered (non-ECC) | | Speed | 2666MHz, 2400MHz, 2133MHz (runs at CPU’s max supported speed) | | Voltage | 1.2V | | Dual-channel | Yes – install in slots 1 & 3 or 2 & 4 for best performance. | | Max capacity | 64GB (4 x 16GB) | | ECC support | No – consumer board, ECC RAM will not post. | | Feature | Details | |---------|---------| | Form
Verified Upgrade Paths:
Do Not: Mix RAM speeds (e.g., 2666MHz and 2400MHz). The board will downclock all to the slowest module. The LGA 1151 socket on the HP 18E7
Overall Verdict:
Solid, no-frills microATX board for office/business use, but very limited for upgrades or gaming.
