Hi Sharp Dvr Reset Password Upd

If you are locked out of your Sharp DVR, the method to reset the password depends heavily on the specific model and the firmware version installed. Most Sharp DVRs are rebranded OEM units (often manufactured by companies like Dahua or OEM generic brands), meaning the interface may vary.

Here are the three most common methods to reset the password:

If the software methods fail, you may need to physically reset the device. Warning: This usually wipes all settings and video recordings.

If your DVR has a newer firmware:

Before doing a hard reset, try these common default combinations:

If none of these work: Contact Sharp Support or the vendor you purchased the unit from. They often have specific "Master Passwords" based on the serial number or MAC address of the unit, which they can provide to verified owners.

To reset the password for a Hi Sharp DVR (often associated with models like the UPD or KD series), you can use several methods ranging from software-based recovery to hardware "hard" resets. 🔑 Method 1: The "Forgot Password" Software Reset hi sharp dvr reset password upd

Most modern Hi Sharp units include a recovery feature on the login screen. Open Login Screen:

Attempt to log in to your DVR directly using the monitor and mouse. Select "Forgot Password":

Look for a question mark icon or a "Forgot Password" button next to the password field. Generate Dynamic Code: The system will often display a Dynamic Code Contact Support:

Hi Sharp requires you to take a screenshot or photo of this dynamic code and email it to sales@hisharp.com.tw

or your regional distributor. They will provide a one-time temporary password. ⚙️ Method 2: Physical Hardware Reset

If you cannot access the software menu, you may need to perform a physical reset. Reset Button: If you are locked out of your Sharp

Check the back or bottom of the unit for a small pinhole labeled "Reset." Press and hold it for 15–30 seconds while the device is powered on. CMOS Battery Removal: Disconnect power and open the DVR casing. Locate the small round silver battery (CR2032) on the motherboard. Remove it for 2–5 minutes , then reinsert it.

This often resets the system clock to 01-01-2000, allowing you to use common "date-based" default passwords like 🛡️ Method 3: Default Credentials

If the unit has been factory reset, try these common default combinations: (Leave blank) 💡 Quick Tips for Success Check the App: If your DVR is linked to the Superlive Plus Hi Sharp EX

app, you may be able to reset the password through the "Remote Config" settings. Power Cycle:

Always restart the DVR after a hardware reset to ensure the new settings take effect. Firmware Updates:

Once back in, update your firmware to the latest version to ensure you have the most secure password recovery options for the future. FAQ - Support | HI SHARP INTELLIGENCE If your DVR has a newer firmware:

If you're using a computer to access your Hi Sharp DVR system, you can reset the password using the DVR software. Here's how:

Many Sharp DVRs run on the XMeye platform. If you cannot reset via the interface, you can use a "Super Password" generator. This requires you to see a specific date/time on your monitor.

If you have tried:

...and the DVR remains locked, your flash memory chip may be dead. Signs include:

In this case, contact Hi Sharp authorized service centers. They have JTAG or serial console tools to manually reflash the bootloader. This costs approximately $50-$100 USD depending on your region.