The Redmi Watch 3 Exclusive does not have hardware buttons that can trigger a factory reset directly.
If the screen is frozen or broken, you cannot factory reset it without using the Mi Fitness app.
This is the most critical method in this guide. If your Redmi Watch 3 Exclusive is completely frozen—the screen is stuck on a logo, unresponsive to touch, or black but vibrating—you cannot use the menus. You need a button-based hard reset.
Note: This method works slightly differently than Android phones. Here is the proven sequence for the Redmi Watch 3 Exclusive:
Important: For the Redmi Watch 3 Exclusive, there is no dedicated "recovery mode" menu (like holding Volume Down + Power on a phone). The button-only method simply forces the hardware to cut power and restart. If the software corruption is severe, you may need to let the battery drain completely (leave it for 2–3 days), then charge it and try again.
For 99% of issues, Method 1 (Settings) or Method 2 (Force reboot + Settings) will solve the problem. The Redmi Watch 3 Exclusive is a stable device, but a hard reset every 6–12 months can keep it running smoothly, especially if you’ve installed several watch faces or notice battery drain.
Pro tip: Before resetting, always sync your data to the Mi Fitness app one last time. You won’t lose historical stats, but the watch’s local cache will be wiped clean.
Have you tried all these methods and still have a bricked watch? Drop a comment below or check the official Xiaomi community forums for the latest firmware recovery tools.
Last updated: October 2025 – Firmware version 1.4.25 and above.
To hard reset your Redmi Watch 3 (including the Active model), you can use the system settings or the physical side button. A hard reset (factory reset) will erase all your personal data, custom watch faces, and health records from the device. Method 1: Reset via System Settings
This is the standard way to reset if your watch screen is responsive. Check Battery : Ensure your watch has at least 50% battery to prevent it from shutting down mid-process. : Press the Side Button
once to wake the screen, then press it again to open the application menu. Find Settings : Scroll through the list and tap the Settings icon (the gear symbol). Navigate to System : Scroll down and select Confirm Reset Factory Reset : Tap the checkmark or
to confirm. The watch will reboot and display the language selection screen once finished. Method 2: Reset using the Side Button how to hard reset redmi watch 3 exclusive
Use this if you are unable to navigate the settings menu or need a quick shortcut. Press and Hold : While the watch is on, press and hold the Side Button Select Option
: A menu will appear on the screen with options to Power Off, Restart, or Restore Factory Settings Restore Factory Settings and confirm your choice. Method 3: Forced Restart (For Frozen Screens)
If your watch is completely frozen and won't respond to taps, a force reboot may be necessary before you can attempt a reset. Force Reboot : Press and hold the Side Button for at least 12 to 15 seconds
The watch will vibrate and the screen will go black. Release the button when the Mi or Redmi logo Important Post-Reset Steps Unpair from Phone : After resetting the watch, go to the Mi Fitness app on your phone, select your device, and tap to ensure a clean connection for the next setup. Bluetooth Settings
To perform a hard reset on your Redmi Watch 3, you can use either the device settings for a complete data wipe (factory reset) or the physical side button for a forced reboot if the screen is unresponsive. Method 1: Factory Reset (Full Data Wipe)
This method clears all personal data and restores the watch to its original out-of-the-box state. Ensure your battery is at least 20-50% before starting to avoid power failure during the process.
Open the Menu: Press the physical side button once to wake the screen, then press it again to open the application list.
Navigate to Settings: Scroll through the apps and tap the Settings (gear icon). Enter System Settings: Scroll down and select System.
Confirm Reset: Tap on Reset or Factory Reset. Tap the checkmark or "Yes" to confirm the erasure of all data. Method 2: Forced Reboot (Unresponsive Screen)
If your watch is frozen and you cannot navigate the menus, use this "hard" restart to reboot the hardware without deleting your data.
Long Press: Press and hold the side button for approximately 12 to 15 seconds. The Redmi Watch 3 Exclusive does not have
Wait for Vibration: Continue holding until the screen goes black and the watch vibrates.
Restart: Release the button when you see the Mi or Redmi logo appear on the screen. Method 3: Power Button Shortcut
A secondary way to reach the reset menu using just the button:
Hold for 3 Seconds: While the watch is on, press and hold the power button for about 3 seconds to bring up a quick menu with options for Restart, Power Off, and Restore Factory Settings.
Are you resetting the watch to fix a syncing issue, or are you planning to pair it with a new phone? How to Factory Reset XIAOMI Redmi Watch 3
To hard reset or factory reset a Redmi Watch 3 (including the Active model), you can use the system settings on the watch or the companion app. If the watch is frozen, a force restart is recommended. Method 1: Reset via Watch Settings
This is the standard way to wipe all data and return the watch to its original state.
Wake the watch: Press the side button to turn on the screen.
Open Menu: Press the side button again to access the application list.
Navigate to Settings: Scroll down and tap the Settings icon (gear icon). System Options: Scroll down and select System.
Confirm Reset: Select Reset (or "Restore Factory Settings"), then tap the check mark or "OK" to confirm. Important: For the Redmi Watch 3 Exclusive, there
Note: Ensure your battery is at least 20–50% to prevent damage during the process. Method 2: Reset if You Forgot the Password
If your watch is locked and you cannot access the settings menu, try these steps:
Via Mi Fitness App: Keep the watch connected to the app on your phone. Go to Device > Security (or Device Password) and select Turn off PIN or Close Password.
Unpair/Re-pair: Some users successfully reset the PIN by unpairing the watch from the Mi Fitness App and then pairing it again.
Physical Button Shortcut: Press and hold the side button for about 3 seconds until the Reboot/Power Off menu appears. Some models reveal a hidden Factory Reset option if you continue to hold or navigate this menu. Method 3: Force Restart (Soft Reset)
If the watch is unresponsive but you don't want to erase your data, perform a force restart: Redmi Watch 3 User Manual . 01
Notes:
You can also reset the watch remotely through the paired smartphone app. This is useful if the watch touchscreen is malfunctioning but the device is still connected via Bluetooth.
Is your watch syncing but you physically can’t use the screen (e.g., glass cracked but Bluetooth alive)? You can trigger a reset remotely using the companion app.
Requirements: Your Redmi Watch 3 Exclusive must still be connected to your phone via Bluetooth.
Steps: