Hpe Smart Array S100i Sr Gen10 Driver Windows: Server 2022
Windows Server 2022 introduces new security features and driver signing requirements. Ensuring compatibility with the S100i requires specific drivers that support the "Software RAID" mode, distinct from the drivers used for hardware-based Smart Arrays. The controller appears to the Operating System (OS) not as a typical physical RAID card, but as a storage processor requiring specific management software (HPE Smart Storage Administrator).
You boot from your Windows Server 2022 ISO (via iLO virtual media, USB, or DVD). The setup loads, but when you reach the "Where do you want to install Windows?" screen, the drive list is completely empty. You see no physical disks or logical RAID volumes.
This is not a hardware failure. It is a missing driver symptom. Windows Server 2022 has no native storport miniport driver for the S100i's PCI device ID (typically PCI\VEN_8086&DEV_A382 or similar).
The solution: Provide the driver during the OS installation or inject it afterward.
Remember: This is software RAID. There is no cache battery. Always use a UPS and enable write caching wisely. hpe smart array s100i sr gen10 driver windows server 2022
Do not rely on the default Windows Server 2022 installation media drivers.
During a clean install of Windows Server 2022, the setup might detect a generic storage controller and allow installation to proceed. However, using the generic Microsoft driver instead of the specific HPE driver often results in:
You must supply the specific HPE driver during the Windows Setup phase (the "Load Driver" screen).
Do not use generic AHCI drivers. You must use HPE’s signed driver for the S100i. Windows Server 2022 introduces new security features and
As of today, the current version is 1.2.30.0 (revision A). Download the .exe or .zip file. If using a zip, extract it to a USB flash drive.
Direct link tip: Search for “S100i Windows Server 2022 driver” on the HPE support site — avoid third-party driver sites.
HPE Intelligent Provisioning (IP) contains the necessary "Driver Store" for Windows Server 2022.
The most common time to need the driver is during a fresh OS install. Here’s how to do it. You boot from your Windows Server 2022 ISO
1. "No drives found" during install:
2. Yellow Exclamation Mark in Device Manager:
3. Performance Issues: