display device # Check model, power type (DC/AC)
display interface brief # See port status
display clock source sync-e state # Verify SyncE lock
display mpls oam egress verify # Validate MPLS-TP OAM
display version # Show firmware (required for 1588v2 support)
Conclusion: The ATN 910D-A is a proven, rugged MPLS-TP access switch for sub-1G aggregation in harsh environments. However, for any greenfield deployment beyond 2023, migrate to the ATN 912D or CloudEngine series to gain 10G uplinks and modern SDN control. Always refer to the official Huawei ATN 910D Hardware Description and Datasheet (v2.7 or later) for absolute electrical and regulatory compliance.
You're looking for information on the Huawei ATN 910DA datasheet. Here are some key features:
Overview
The Huawei ATN 910DA is a high-performance, next-generation aggregation and transport node (ATN) designed for metropolitan area networks (MANs). It's part of Huawei's ATN 900 series, which provides a range of products for various network applications.
Key Features
Here are some of the top features of the Huawei ATN 910DA:
Technical Specifications
Here are some detailed technical specifications of the Huawei ATN 910DA:
Applications
The Huawei ATN 910DA is suitable for various applications, including:
The Huawei ATN 910 series, particularly the model, represents a specialized chapter in Huawei’s network infrastructure story: the rise of high-density, compact metro access routers designed for the transition to 4G, 4.5G, and 5G networks. Based on the technical specifications, here is the story of this device. The Problem: The Bottleneck at the Edge
As mobile data exploded with smartphones and high-definition video, backhaul networks needed to evolve. Operators required routers that were small enough to fit into limited street-side cabinet space (1U height) but fast enough to handle massive 10GE traffic, while still supporting legacy E1 lines. (Compact Powerhouse) The was developed as a versatile, high-density solution.
Highest Density: It claimed to have the highest 10GE port density in its class (1U height), making it a favorite for space-constrained sites. Capacity: It supports a switching capacity of , supporting a flexible combination of interfaces.
Compatibility: It protects operator investment by being fully compatible with existing network infrastructure while allowing smooth upgrades to 4.5G. The Plot Points:
Deployment: Deployed at the edge of mobile metro networks for rapid service provisioning.
Functionality: Handles site-side aggregation for LTE base stations.
Future-Proofing: Bridges the gap between traditional access and the high-speed requirements of 5G, providing a long lifespan in the field.
In short, the story of the ATN 910 series is one of packing massive, high-speed switching power into a tiny, robust package to keep up with the world's insatiable demand for mobile data. huawei atn 910da datasheet top
To give you a more detailed story based on the technical specs, Explain the main differences between the and the older models? Focus on its specific use cases in 5G backhaul? ATN910C - Huawei Carrier
One of the first things you’ll notice on the datasheet is the form factor. The ATN 910DA is designed with a 1U height standard. While "1U" is common in data centers, the ATN 910DA is specifically engineered for the specific challenges of mobile backhaul.
Disclaimer: Specifications are subject to change without notice. For the most current datasheet or to confirm exact part numbers, please consult your Huawei representative or the official Huawei Enterprise support portal. This document is a compilation based on typical ATN 910D series data.
Huawei ATN 910D-A a compact, high-performance 1U fixed-box router designed specifically for 5G base station access and VIP private line services . It features a massive 880 Gbps switching capacity
, supporting a wide range of interfaces from GE to 100GE to facilitate smooth network evolution. Technical Overview & Product Highlights ATN 910D-A is a key component of Huawei's ATN Series Access Routers
, tailored for large-scale deployment in varied environmental conditions. Large Capacity in Compact Form : Despite its 1U height and 220mm depth, it delivers
of system capacity, making it one of the most dense access routers in the industry. High-Density Interfaces : It supports flexible port configurations, including: 4 x 100GE/50GE 16 x 25GE/10GE/GE 8 x 10GE/GE/FE Advanced Networking Protocols : Fully 5G-ready, it supports modern architectures like FlexE (Slicing) for intelligent fault detection. Industry-Level Reliability Temperature Hardening : Operates reliably in extreme temperatures ranging from -40°C to +65°C Power Redundancy : Supports dual AC/DC power modules (1+1 backup). Clock Synchronization
: Features high-precision 1588v2 and G.8275.1/G.8275.2 clock features. Huawei Carrier Core Specifications Specification Dimensions (W x D x H) 442mm x 220mm x 44.45mm (1U) System Capacity Typical Power Consumption L3 Features OSPF, IS-IS, BGP, IPv6 (6PE/6VPE), VxLAN, GRE MPLS Features LDP, RSVP-TE, VPLS, VPWS, L3VPN Application Scenarios ATN 910D-A is primarily deployed in mobile backhaul networks
to aggregate traffic from 2G, 3G, 4G, and 5G base stations. Its high reliability and wide temperature range also make it suitable for outdoor cabinet installations and VIP private line access for government and enterprise sectors. Huawei Carrier comparison with other models in the ATN 910 series? ATN Series - Huawei Carrier
The Huawei ATN 910D-A is a high-capacity, 5G-oriented 1U fixed multi-service access router designed primarily for base station access and VIP private line services. It is part of the broader ATN 910 series, which focuses on "last-mile" integrated service access for 2G/3G/4G/5G mobile networks. Key Technical Specifications
The ATN 910D-A is a performance-heavy upgrade within the 910 series, featuring a significantly higher switching capacity than earlier models. Feature Specification Switching Capacity Form Factor 1U (442mm x 220mm x 44.45mm) Port Density 4100GE/50GE + 1625GE/10GE/GE + 8*10GE/GE/FE Typical Power Operating Temp -40°C to +65°C Weight Core Capabilities
5G-Ready Features: Supports advanced routing and transport protocols including SR/SRv6 (Segment Routing), EVPN, FlexE (Flexible Ethernet) for network slicing, and iFIT for in-band flow information telemetry.
High Precision Sync: Includes 1588v2 high-precision clock features and Synchronous Ethernet.
Reliability: Features 1+1 power redundancy (supporting both AC and DC inputs) to ensure carrier-grade availability.
Deployment: Its compact 220mm depth allows it to share cabinets with wireless Baseband Units (BBUs), facilitating large-scale 5G deployments.
Detailed documentation including the Quick Installation Guide and technical brochures are available through Huawei Carrier Support. ATN Series - Huawei Carrier
Huawei ATN 910DA is a high-performance, compact 1U router designed for next-generation 5G mobile backhaul and multi-service convergence. It features a high-density port configuration with support for display device # Check model, power type (DC/AC)
interfaces, making it a critical component for high-bandwidth carrier networks. Huawei Carrier Core Technical Specifications
The following specifications represent the "top" tier of the ATN 910DA hardware capabilities: Port Density 16 x 25GE/10GE/GE (SFP28/SFP+ ports). 8 x 10GE/GE/FE Form Factor
: 1U high, designed for high-density space-constrained environments. Reliability : Support for Hardware Redundancy
including dual power modules (AC/DC, dual AC, or dual DC modes) and triple fan heat dissipation. Operational Temperature : Hardened for industrial environments, operating from –40ºC to +65ºC Huawei Carrier Key Advanced Features SDN & 5G Evolution
: Fully supports modern Software-Defined Networking (SDN) protocols like Segment Routing (SR/SRv6)
, EVPN, and VxLAN to simplify tunnel technology and improve network efficiency. Network Slicing : Utilizes FlexE (Flexible Ethernet)
technology to divide physical ports into multiple sub-interfaces, ensuring service isolation and dedicated bandwidth for different traffic types. Precision OAM
: Features hardware-based OAM with detection intervals as low as
, enabling link failure detection within 10 ms and service switchover in less than 50 ms. Traffic Management : Includes a large device buffer (up to
) to handle sudden traffic bursts and prevent congestion-related quality degradation. Huawei Carrier Service & Management Capabilities
: Supports Y.1731, TWAMP, and IPFPM for end-to-end performance detection and fast fault location. Visualized O&M : Integrates with platforms like the Huawei iMaster NCE
(formerly U2000) for graphical service management and real-time quality monitoring. Huawei Carrier CLI configuration examples
Huawei ATN 910D-A is a high-capacity, 1U case-shaped router designed primarily for 5G base station access and VIP private line services. It is positioned as a 5G-oriented access layer product that supports high-density ports and advanced features like Segment Routing (SR/SRv6) and network slicing. Core Specifications System Capacity: 800 Gbps switching capacity.
Dimensions: Standard 1U rack height (442 mm x 220 mm x 44.45 mm). Weight: Approximately 4 kg.
Power: Supports dual DC/AC power inputs with 1+1 backup redundancy.
Operating Temperature: Highly resilient range from -40°C to +65°C, making it suitable for outdoor deployment. Port Density and Connectivity
The device offers high-density multi-rate interfaces to meet evolving network requirements: 4 x 100GE/50GE ports for high-speed uplinks. 16 x 25GE/10GE/GE ports for versatile service access. 8 x 10GE/GE/FE ports for broad compatibility. Key Technical Features Conclusion: The ATN 910D-A is a proven, rugged
5G-Ready Protocols: Native support for SRv6, EVPN, and FlexE (Flexible Ethernet) for efficient network slicing and service isolation.
High-Precision Synchronization: Supports 1588v2, G.8275.1, and G.8275.2 clocking standards to meet strict 5G timing requirements.
Advanced O&M: Utilizes iFIT (In-situ Flow Information Telemetry) and hardware-based BFD for real-time path restoration and millisecond-level fault detection.
Reliability: Features 5-level H-QoS and various protection mechanisms like TI-LFA (Topology-Independent Loop-free Alternate) for sub-50ms failover times.
For official technical documentation and support, you can visit the Huawei Enterprise Support Portal. ATN 910D-A Brochure v2.0 | PDF - Scribd
The Huawei ATN 910D-A is a compact, high-capacity 1U router designed primarily for 5G mobile backhaul and VIP private line services. Key Technical Features
Massive Switching Capacity: Provides an 800 Gbps switching capacity within a compact 1U form factor.
High-Density Interfaces: Supports a diverse range of ports, including 4 x 100GE/50GE, 16 x 25GE/10GE/GE, and 8 x 10GE/GE/FE.
5G-Ready Protocols: Fully supports next-generation features such as SRv6 (Segment Routing over IPv6), EVPN, and FlexE (Flexible Ethernet) for network slicing.
Precision Synchronization: Built-in 1588v2 high-precision clock synchronization, essential for 5G network performance.
Intelligent O&M: Features iFIT (In-situ Flow Information Telemetry) for real-time performance monitoring and millisecond-level fault detection. Physical & Environmental Specs
Compact Design: Standard 19-inch width (442mm) with a shallow depth of 220mm, allowing it to fit in 300mm deep cabinets alongside wireless base stations.
Ruggedized Performance: Operates in extreme temperatures ranging from -40°C to +65°C, making it suitable for harsh outdoor environments.
Power Reliability: Supports 1+1 redundancy for both AC and DC power inputs.
For more technical guides or software packages, you can visit the Huawei Support Page . Huawei ATN 910D-A Support Guide, Manuals & PDF
The datasheet highlights several features that elevate the device above basic switches: