Code: Image2lcd Register

Image2LCD output (simplified):

0x01, 0x00,
0x11, 0x00, 0x80,
0x36, 0x01, 0x00,
0x3A, 0x01, 0x05,
0xB2, 0x03, 0x0C, 0x0C, 0x00,
0x29, 0x00,
0x2C, 0x00,
0xFF  // end marker

Note: The exact register values vary; always cross-check with your specific display module’s initialization sequence.

---

The registration code for the software (v3.2 and similar versions) is typically provided by manufacturers like Good Display Keyestudio to remove watermarks from converted images. The registration code is: 0000-0000-0000-0000-6A3B How to Register: application.

button (usually located in the bottom-right corner or within the top menu). Enter the code above into the registration field.

Confirm to complete the process. This will remove the "Image2LCD" watermark that appears on converted images in the unregistered version [12, 13].

This software is frequently bundled for free with e-Paper and LCD modules. If you downloaded the software from a vendor site like BuyDisplay , the code is often included in a file within the downloaded archive [10]. specific settings

(like Scan Mode or Bits per Pixel) for your particular LCD or e-Paper display?

The registration code for Image2Lcd is 0000-0000-0000-0000-6A3B [3, 5, 7]. This code is widely provided by manufacturers like Good Display and BuyDisplay to unlock the software’s full features and remove the "Image2Lcd" watermark from generated images [4]. How to Use the Registration Code image2lcd register code

Download & Install: Obtain the Image2Lcd installer from a reputable source. Open the App: Launch the software on your Windows PC.

Enter Code: Click the Register button in the top menu or help section.

Complete Activation: Copy and paste the code 0000-0000-0000-0000-6A3B into the field and confirm [3, 5]. Converting Images for LCD/OLED: A Guide to Image2Lcd

Image2Lcd is a essential utility for embedded developers working with monochrome, grayscale, or color LCD/OLED/e-Paper displays [8]. It converts standard image files (BMP, JPG, PNG) into the C-array or Binary data formats required by microcontrollers like Arduino and ESP32 [2]. Key Features

Multi-Format Support: Converts images into C-array files, binary files (.bin), and Windows bitmaps [8].

Customizable Output: Adjust pixel scanning direction (horizontal/vertical) and color depth (1-bit monochrome to 32-bit TrueColor) [8].

Preprocessing Tools: Supports color inversion, resizing, and brightness/contrast adjustments directly within the tool [7]. Basic Conversion Workflow Load Image: Import your target file into Image2Lcd. Image2LCD output (simplified): 0x01, 0x00, 0x11, 0x00, 0x80,

Set Constraints: Set the Maximum Width and Height to match your display’s resolution [7].

Select Output Type: For most Arduino projects, choose C-array (.c).

Scan Settings: Match the "Scan Mode" to your display driver's documentation (e.g., "Top to Bottom, Left to Right") [7].

Save: Click Save to generate the text file containing the pixel data, then copy the array into your IDE (like Arduino IDE) to display the image [2].

---

When you examine the generated array, you will see a pattern. Image2LCD inserts command prefixes to distinguish between LCD commands (0x00) and pixel data (0x40). Some versions use 0x00 for command, 0x40 for data.

| Prefix | Meaning | Example | |--------|---------|---------| | 0x00 | Next byte is an LCD command | 0x00, 0xAE (Display OFF command) | | 0x40 | Next bytes are raw pixel data | 0x40, 0xFF, 0x00 (Two pixel bytes) |

Important: The exact prefix values can vary based on the "Register code type" setting in Image2LCD (e.g., "R51_8bit", "R51_16bit", "Generic"). Note: The exact register values vary; always cross-check

---

Image2LCD generates a generic initialization. If your text appears backward or upside down, look for the Memory Access Control register in the generated code (often 0x36 for ILI9341/ST7789).

#include <stdint.h>
#include "lcd_hal.h" // Your hardware abstraction layer
#define CMD_PREFIX  0x00
#define DATA_PREFIX 0x40
void LCD_SendRegisterCode(const uint8_t *code, uint32_t length) 
uint32_t i = 0;
while (i < length) 
uint8_t prefix = code[i++];
    if (prefix == CMD_PREFIX) 
        // Next byte is a command
        LCD_WriteCommand(code[i++]);
else if (prefix == DATA_PREFIX) 
        // Next bytes are data until next prefix or end
        while (i < length && code[i] != CMD_PREFIX && code[i] != DATA_PREFIX) 
            LCD_WriteData(code[i++]);
else 
        // Raw data without prefix (fallback)
        LCD_WriteData(prefix);


// Usage:
extern const unsigned char gImage_bootlogo[];
LCD_SendRegisterCode(gImage_bootlogo, sizeof(gImage_bootlogo));

To obtain the register code using the Image2LCD software: