Nitocote Pe135: Msds

(Proprietary – exact % only on official SDS. Typical components:)

8.1 Exposure Limits (Typical)

8.2 Personal Protective Equipment (PPE)

(Note: Exact formulation, CAS numbers and concentrations must be obtained from the manufacturer SDS for regulatory or compliance use.)

| Chemical Name | CAS Number | Concentration (%) | Hazard Class | | :--- | :--- | :--- | :--- | | Xylene (mixed isomers) | 1330-20-7 | 30–50 | Flam. Liq. 3, Acute Tox. 4 | | Ethylbenzene | 100-41-4 | 10–20 | Flam. Liq. 2, Carc. 2 | | Polyurethane resin | Proprietary | 20–30 | Not classified | | Additives (catalysts, anti-skin) | Various | <5 | Skin Irrit. 2 | nitocote pe135 msds

Note: Ethylbenzene is listed as a possible carcinogen (IARC Group 2B). The MSDS will highlight this for long-term exposure risks.

Immediately wash with soap and water. Do not use thinner or paint remover to clean your skin—this increases dermal absorption. If redness or blistering occurs, consult a physician. (Proprietary – exact % only on official SDS

Before analyzing the MSDS, it is vital to understand the product’s chemistry. According to the technical data sheet (TDS) and MSDS:

Why the MSDS matters: Because Nitocote PE135 is solvent-based, it is flammable and requires specific ventilation and personal protective equipment (PPE). The MSDS details these exact requirements. 3M 6001) or a supplied-air system.

No. A dust mask (N95) does not protect against organic solvent vapors. You must use a half-face respirator with organic vapor cartridges (e.g., 3M 6001) or a supplied-air system.