Always provide: Model (XLt 898), serial number (on back label), and firmware version (from Menu → Diagnostics → About).
Final reminder: This summary is not a substitute for the official manual. For complete safety, calibration procedures, and warranty terms, refer to the printed manual included with your Niton XLt 898.
Here is the user manual content for the Niton XLt 898 Element Analyzer. Niton Xlt 898 User Manual
Disclaimer: This document is a representative technical guide based on common specifications for Thermo Scientific Niton XLt series analyzers. For official safety certifications and specific serial number configurations, refer to the original documentation provided with your unit.
The Niton XLt 898 contains a low-dose X-ray tube (maximum 40 kV, 50 µA) or a radioactive source (depending on configuration - typically Am-241, Cd-109, or Cm-244). Always provide: Model (XLt 898), serial number (on
| Part | Action | Frequency | |------|--------|------------| | Window (Prolene film) | Wipe with isopropyl alcohol and lint-free cloth | Daily or when dirty | | Detector | Do not touch; internal only | Never (service only) | | Battery contacts | Clean with pencil eraser | Monthly | | Exterior | Damp cloth (mild soap) | Weekly | | Window replacement | Unscrew nose cone, replace film | As needed (tears/punctures) |
Important: If the window is torn, do not use – dust/debris will destroy the detector. Final reminder: This summary is not a substitute
This is the core functionality. The manual explains the "Point, Shoot, and Analyze" workflow. It details:
| Code | Meaning | Action | |------|---------|--------| | E-101 | Detector temp too high | Allow to cool for 10 min | | E-205 | Shutter stuck | Cycle power; check for debris | | E-312 | Low battery | Replace or recharge | | E-419 | Calibration drift | Run daily check; if persists, service | | W-001 | Proximity sensor blocked | Clean sensor lens |
| Parameter | Value | |-----------|-------| | Weight | 1.3 kg (2.9 lb) with battery | | Dimensions | 25 × 9 × 28 cm (10 × 3.5 × 11 in) | | Battery life | 6–8 hours continuous use | | Operating temp | -10°C to 50°C (14°F to 122°F) | | Storage temp | -20°C to 60°C (-4°F to 140°F) | | Humidity | 10–90% non-condensing | | Warm-up time | < 2 minutes from cold start |
A: Partially. As of 2024, hardware repairs are limited. However, calibration services and software updates (NDT v7.5) remain available. The user manual is still downloadable.