English - Prosecure Opti Combi Manual

The ProSecure Opti-Combi is a robust packaging solution designed for reliability and hygiene. Adherence to the procedures outlined in this report—specifically regarding the Lockout/Tagout safety measures and daily cleaning cycles—is mandatory for safe operation. Regular maintenance of pneumatic parts and seals will ensure the machine retains its high efficiency and accuracy over its operational lifespan.

For electrical diagrams or specific part numbers, users must refer to the full schematic appendix provided in the original manufacturer's documentation.

Prosecure Opti Combi sensors are sophisticated combined radar and infrared systems used primarily for automatic sliding doors. They handle both motion detection (to open the door) and presence detection (to prevent the door from closing on someone). 🛠️ Prosecure Opti Combi: Quick Setup Guide

The Prosecure Opti Combi is designed for high-pedestrian areas. It utilizes K-Band (24.150 GHz) radar technology for activation and Active Infrared for safety. 1. Mounting and Installation Maximum Height: Typically 3 meters (approx. 9.8 feet).

Positioning: Mount the sensor centered above the door opening.

Clearance: Ensure no moving objects (plants, signs) are in the detection field.

Cover Removal: Use a flathead screwdriver to gently pop the side tabs to access the internal buttons. 2. Wiring Connections

The sensor usually employs an 8-pin connector. Standard wiring colors are: Red/Black: Power supply (12V–24V AC/DC). White/Yellow: Radar output (Activation/Opening). Green/Grey: Infrared output (Safety/Presence). ⚙️ Adjusting the Settings

Most Prosecure Opti Combi models feature a digital display or a series of DIP switches and potentiometers to fine-tune performance. Radar (Motion) Adjustments

Sensitivity: Adjust the potentiometer clockwise to increase the detection range.

Directional Sensing: You can set the sensor to detect only "forward" motion (people walking toward the door) to save energy by not opening for people walking away. Infrared (Safety) Adjustments

Field Depth: Adjust the rows of infrared spots to ensure they cover the threshold of the door.

Presence Timer: Set how long the door stays open if an object is stationary in the path (e.g., 2s, 30s, or infinity).

Frequency: If you have two sensors close together, change the frequency setting on one to prevent "crosstalk" or interference. 🔍 Troubleshooting Common Issues Potential Cause Door won't close Infrared detection triggered Clean the lens; check for floor reflections. Door opens randomly Ghosting/Vibration Reduce radar sensitivity; tighten mounting screws. Red LED flashing Internal Error Cycle power; check if the connector is loose. Narrow detection Angle too steep Tilt the radar module upward or downward. ⚠️ Safety and Compliance

To meet EN 16005 or DIN 18650 standards, the infrared safety curtain must be tested daily. The Prosecure Opti Combi features a self-monitoring "Test Input" that the door controller uses to verify the sensor is functional before every closing cycle.

Find the exact wiring diagram for your specific door controller brand (like Dorma, GEZE, or Record)?

This section includes pin-out diagrams, power supply requirements (typically 12V DC), and guidance on connecting magnetic contacts, motion sensors, and sirens. Critical: Always read the safety warnings about disconnecting power before wiring.

Before operating the ProSecure Opti-Combi, all personnel must adhere to the following safety standards to prevent injury and machine damage.

This is often the most thumbed-through section. Common issues like “Low Battery,” “Tamper,” or “Zone Fault” are listed with plain-English solutions.

Where to Download the Official ProSecure Opti Combi Manual in English

Caution: Avoid sketchy third-party PDF sites that may contain outdated or incorrect information.

Pro Tip: Bookmark the PDF on your smartphone. When you’re standing in front of the keypad trying to silence a false alarm, having the manual in your pocket saves time.

Three Common Mistakes to Avoid (According to the Manual)

Even with the English manual in hand, users often trip up on these points:

Final Thoughts

The ProSecure Opti Combi Manual in English is more than a dry technical document—it’s the key to making your security system work for you, not against you. Whether you’re a DIY enthusiast or a certified installer, take an hour to read through the programming and troubleshooting sections.

Next Steps:

Have a specific question about your Opti Combi that the manual didn’t answer? Drop a comment below, and our community might be able to help.

Disclaimer: This post is for informational purposes. Always refer to the original ProSecure Opti Combi Manual in English for your specific hardware revision.

Introduction

The ProSecure Opti Combi is a high-performance, wall-mounted combi boiler that provides both central heating and hot water. This guide is designed to help you understand the installation, operation, and maintenance of your ProSecure Opti Combi boiler, using the manual in English.

Table of Contents

1. Safety Precautions

Before installing or operating your ProSecure Opti Combi boiler, please read and follow these safety precautions:

2. Installation Guide

Refer to the ProSecure Opti Combi manual English (page 5-15) for detailed installation instructions. Here are the general steps:

3. Operating Instructions

Refer to the ProSecure Opti Combi manual English (page 16-25) for detailed operating instructions. Here are the general steps: prosecure opti combi manual english

4. Maintenance and Servicing

Regular maintenance and servicing are essential to ensure the boiler operates efficiently and safely. Refer to the ProSecure Opti Combi manual English (page 26-35) for detailed maintenance and servicing instructions. Here are the general steps:

5. Troubleshooting

Refer to the ProSecure Opti Combi manual English (page 36-45) for detailed troubleshooting instructions. Here are some common issues and solutions:

6. Technical Specifications

Here are the technical specifications of the ProSecure Opti Combi boiler:

Conclusion

This guide provides a comprehensive overview of the ProSecure Opti Combi manual English. By following the installation, operating, and maintenance instructions outlined in this guide, you can ensure your boiler operates efficiently and safely. If you have any further questions or concerns, please consult the manufacturer's instructions or contact a qualified engineer.

Report: ProSecure Opti-Combi System Operation and Maintenance Manual

Date: October 26, 2023 Subject: Comprehensive Operational and Maintenance Report for ProSecure Opti-Combi Units Prepared For: Equipment Users, Maintenance Personnel, and Facility Management

The ProSecure Opti Combi by dormakaba is a dual-technology sensor designed for automatic sliding doors. It combines radar for motion detection (activation) and active infrared for presence detection (safety) to ensure the door stays open if someone is in the threshold. Key Technical Specifications

Dual Technology: Radar (activation) and Active Infrared (safety).

Mounting Height: Typically installed up to 2.20 meters high.

Safety Compliance: Certified according to EN 16005 for pedestrian safety.

Wiring: Standard 24V supply with specific outputs for activation (radar) and safety (infrared) signals. Installation & Configuration Summary

Mounting: Use the provided adhesive template to drill holes and secure the base plate with screws.

Angle Adjustment: The inclination angle can be modified in 5° increments (0° to 40°), and the PCB can be turned horizontally (-35° to +35°) to refine the detection range. DIP Switch Settings:

DIP 5: Often used to initiate initialization or programming modes.

DIP 6: Must be 'OFF' to allow the use of a dormakaba remote control.

LCD Programming: The "Opti Combi" model features an LCD and control keys. Use the Red key to switch functions and the Black key to select values (e.g., setting the "learning time" for the safety zone).

Detection Area: The radar antenna can be rotated or swapped to create either a wide or narrow detection field. Safety Warnings

Electrostatic Damage: Avoid touching electronic components or using metal tools during installation.

Interference: Keep the sensor away from rain, moving objects (plants, fans), and fluorescent lights to prevent false activations. PrimeTec - BBC Bircher Smart Access

Assuming you mean the ProSecure Opti Combi boiler (English manual) — key useful features:

If you want, I can:

The ProSecure Opti Combi is an EN 16005-compliant sensor for automatic sliding doors that combines microwave radar for motion detection and active infrared (AIR) for safety. The device requires specific mounting and wiring configurations for optimal functionality, featuring adjustments for inclination angle and presence zone coverage. For the official English manual, download the Opti Combi Quick Guide from dormakaba. prosecure opti combi

The dormakaba Prosecure Opti Combi is a combined sensor used for the automatic activation and safety monitoring of sliding doors. It uses radar for motion detection (opening) and active infrared for presence detection (safety threshold). Wiring & Terminal Connections

Standard wiring for the Prosecure Opti Combi typically follows this color-coded configuration: White (-): Power supply (Ground). Brown (+): Power supply ( Green (-): Microwave module output (Activation zone). Yellow (+): Microwave module output. Grey (-): Test input. Pink (+): Test input. Blue (-): Infrared module output (Safety zone). Red (+): Infrared module output. LED Status Indicators The sensor's LED provides immediate feedback on its status: Solid Green: Device is ready for operation. Solid Red: Detection is active (motion or presence). Flashing Green: A remote command has been received. Flashing Red: A fault has been detected. Flashing Red/Green: Initializing after power-on. Configuration & Adjustments

Settings can be adjusted using the onboard red and black buttons or via a remote control.

Activation of Configuration Mode: Press both the red and black buttons simultaneously. The display will change from "A" (Automatic) to "C" (Configuration).

Changing Values: Use the red button to cycle through functions (like sensitivity or learning time) and the black button to modify the value for that function.

Learning Time (Sensitivity): You can set the "learning" or monitoring time for the safety zone. For example, a value of "2" often corresponds to a 30-second learning period.

Cross-Traffic Suppression: This feature can be activated to prevent the door from opening when people walk past it rather than toward it, helping to save energy. Installation Best Practices Mounting Height: Typically installed at heights up to

meters depending on the specific model and safety standards (e.g., DIN 16005).

Environmental Protection: It is recommended to use a weather cap for outdoor applications to prevent interference from rain.

Interference: Avoid placing moving objects like fans or large plants within the detection field.

You can find the full official technical documentation in English through the dormakaba Download Center. prosecure opti combi The ProSecure Opti-Combi is a robust packaging solution

The dormakaba Prosecure Opti Combi is a specialized combined sensor designed for automatic sliding doors, integrating radar for movement activation and active infrared for threshold safety. Overview of Functionality

The Prosecure Opti Combi serves two primary roles to ensure efficient and safe door operation:

Activation (Radar): Detects approaching individuals to trigger the door opening. It features direction recognition, meaning it can distinguish between people walking toward the door (opening it) and those walking away (closing it sooner to save energy).

Safety (Infrared): Creates a "light curtain" at the threshold and in front of the door opening. This ensures the door remains open as long as a person or object is detected in the danger zone, preventing accidental closure. Installation and Setup Procedures

Based on technical documentation from dormakaba , the setup involves several critical steps:

Mounting: Use the provided mounting template to drill holes and secure the base plate. Ensure the sensor is protected from rain and away from moving objects like plants or fans that could cause false triggers.

Wiring: Connect the cable according to the color-coded scheme (e.g., white/brown for power, green/yellow for activation output, and blue/red for safety output). It must be operated from a SELV (Safety Extra Low Voltage) supply.

Initialization: Once powered, the sensor enters a "learning phase" (LED flashes red/green for approximately 25 seconds). During this time, the area must be clear of moving objects so the sensor can calibrate to its environment. Field Adjustment:

Mechanical: Adjust the inclination angle (T) and rotation (P) to define the detection zone.

Optical: Partial masking of the optics can be used to further refine the safety area (zones L1, L2, R1, R2, etc.).

Configuration: Specific properties like sensitivity, relay off-delay time, and output logic can be adjusted via a push-button menu or an optional remote control. Safety and Maintenance

Testing: After installation, verify settings by walking into the detection areas. A red LED typically indicates a safety detection, while a green LED indicates activation.

Professional Servicing: In regions like the UK, safety devices for automatic doors should be inspected by a qualified technician (e.g., ADSA certified) at least once a year.

Environment: The sensor is generally rated for temperatures between -15∘Cnegative 15 raised to the composed with power C +50∘Cpositive 50 raised to the composed with power C

. For outdoor use, the manufacturer recommends a weather protection cap. prosecure opti combi

The Prosecure Opti series (Motion/Combi) is designed for automatic door operators, combining radar technology for motion detection with infrared technology for presence detection (in Combi models). The device is engineered to activate, open, and safeguard passage areas, complying with safety regulations like DIN 18650 and EN 16005. 2. Package Contents & Technical Specifications

Contents: Sensor module, mounting cable, fixing screws, and mounting template.

Sensor Type: Microwave radar (motion) and Active Infrared (presence/safety).

Installation Height: Typically optimized for 2.0 to 3.0 meters (check specific unit for maximum range).

Environmental: IP44/IP54 rated (depending on model) for resistance to dust and splashing water. Operating Voltage: Typically 12-24V AC/DC. 3. Installation Guide (English)

Preparation: Drill fixing holes using the provided template on the lintel or door leaf.

Mounting: Secure the mounting bracket to the wall or ceiling. Tilt the bracket if the mounting surface is not parallel to the floor.

Wiring: Connect the cable according to the color codes specified in the manual, ensuring compatibility with the door operator control unit.

Angle Adjustment: Adjust the radar module’s inclination angle to set the detection range. Steeper angle: Shorter detection range. Shallower angle: Longer detection range. 4. Configuration and Programming

Detection Area: Use the mechanical settings to increase or decrease the width and depth of the radar field.

Sensitivity: High sensitivity is recommended for small detection areas, while low sensitivity is better for avoiding traffic interference.

Relay Settings: Configuration options for normally open (NO) or normally closed (NC) outputs.

Combi Presence Field: Adjust infrared spots on the floor to prevent the door from closing while a person is in the threshold area. 5. Troubleshooting “Restart the Motion Sensor

by removing the batteries or power supply and then returning power. Note: Power must be removed for at least 10 seconds to ensure a proper reboot.” Scribd

“Ensure both sides are seated [on the bracket] ... Use handscrews to secure.” Scribd

Door remains open: Increase the hold time, decrease sensitivity, or check if the infrared field is hitting the floor/door, not the person.

Door doesn't detect well: Increase sensitivity, change the antenna angle, or move the sensor further from the door surface.

LED Indicators: Red (Motion), Green (Presence), Amber (Error/Setup). 6. Safety Notes Ensure the power is off during installation.

The system must be operated only by qualified personnel to ensure compliance with safety standards. If you can tell me: The exact model number (e.g., Opti Motion Opti Combi Whether you are dealing with a sliding or swing door

I can give you specific wiring diagrams or calibration steps. ProSecure Opti Motion Sensor Manual | PDF - Scribd

ProSecure Opti Combi is a high-performance combined sensor used primarily for automatic sliding doors. It utilizes Active Infrared (AIR) technology for presence detection (safety) and technology for motion detection (activation). 🛠️ Technical Specifications Mounting Height: 2.0m to 4.0m (approx. 6.5ft to 13ft). Technology: 24.125 GHz Radar (Motion) + Active Infrared (Safety). Power Supply: 12–24V AC/DC. Protection Class: IP54 (Dust and splash-proof). Temperature Range: -20°C to +60°C. 🚦 LED Indicator Guide

The integrated LED provides instant feedback on the sensor's status: 🟢 Green: Standby mode (Operational). Infrared (AIR) safety curtain triggered. 🟡 Yellow: Radar (Motion) detection triggered. 🔵 Blue: Configuration mode or internal test phase. ⚪ Flashing Red: Fault detected / Error state. ⚙️ Configuration & Adjustment The unit is typically adjusted using internal DIP switches remote control 1. Motion Detection (Radar) You can adjust the radar field to be wide or narrow. Sensitivity: Where to Download the Official ProSecure Opti Combi

Increase for faster opening; decrease to prevent "ghosting" from vibrating objects. Directionality:

Set to "Forward" (detects only people approaching) to save energy and reduce wear. 2. Safety Detection (Infrared) Curtain Depth: Adjust how close to the door the safety zone reaches. Presence Timer:

Determines how long the door stays open if someone stands still in the threshold (e.g., 30s, 1 min, or infinite). Frequency:

If two sensors are close together, change frequencies to avoid interference. 🔍 Troubleshooting Potential Cause Door stays open Object in safety zone Clear the threshold of mats or signs. Door opens/closes randomly Vibration or rain Lower Radar sensitivity or change tilt angle. LED flashing Red Internal error Cycle power (OFF/ON) or check wiring. No detection No power / Incorrect wiring Check 12-24V input at the terminal block. ⚠️ Safety Precautions Always perform a "walk test" after installation.

Use a damp, soft cloth. Avoid harsh chemicals on the optical lens. Compliance: Ensure settings meet local standards (like ANSI 156.10 If you'd like to dive deeper, I can help you with: DIP switch settings for your specific model. wiring diagram for your door controller (e.g., Record, Besam, Dorma). Instructions on using the handheld remote control for programming. Which of these would be most helpful for your setup?

ProSecure Opti Combi is a sensor system (typically by ) used for automatic doors. It combines technology for motion detection and active infrared technology for safety presence detection. Manual Overview & Key Settings

The following information is compiled from common operating and installation guides for this sensor series. Detection Technologies : Used to detect moving objects (approach detection). Active Infrared

: Used for the "safety curtain" to detect stationary or slow-moving objects in the door's threshold. LED Indicators : Active infrared detection (safety area triggered). : Microwave detection (motion area triggered). Flashing Red/Green

: Device is in a self-test or initialization phase (usually lasts about 10 seconds after power-on). Installation & Programming Tips Mounting Height

: Standard mounting is usually up to 3 meters, but industrial variants (like the Opti Motion Mono) can go higher. Safety Requirements

: Before use, ensure all objects that do not belong in the door area are removed to prevent false calibration. Adjustments Detection Area

: Sensitivity and size of both the microwave and infrared curtains can be adjusted via internal push buttons or dip-switches. Cross-Traffic Suppression

: Important for swing doors to prevent the sensor from detecting the door's own movement. Swing Doors

: When used on swing doors, it is recommended to mount the sensor 20–30 cm above the door edge on the hinge side. Documentation Links

You can find more detailed technical data and wiring diagrams in these resources: ProSecure Opti Motion Stereo Manual (dormakaba/Ahlsell) — Includes specific setup for swing and sliding doors.

ProSecure Opti Motion Sensor Detailed Specifications (Scribd) — Covers antenna characteristics and programming options. or a specific troubleshooting code for this sensor? Prosecure Opti Motion Stereo - Ahlsell

The dormakaba ProSecure Opti Combi is a combined radar and active infrared safety sensor designed for automatic sliding doors. It integrates motion detection for door opening with a light curtain for presence detection to prevent door closure on individuals. Core Functions & Features

Combined Detection: Radar provides the opening impulse, while an active IR light curtain monitors the "danger zone" for anti-crush safety.

Direction Recognition: The sensor can distinguish between people approaching and walking away, closing the door faster to save energy.

Cross-Traffic Filtering: Adjustments allow the sensor to ignore side-to-side traffic that is not intending to enter.

LCD Display: Features an onboard display for precise parameter settings and diagnostics. Wiring & Pin Assignment

The connection cable typically uses the following standard pinout: White: Power Supply (-) Brown: Power Supply (+) 11.5–32 V DC Green/Yellow: Microwave module output (Activation zone) Grey/Pink: Test signal Blue: Active infrared module output (Safety zone) Basic Setup Instructions

Mounting: Use the provided template to drill holes and mount the sensor above the door opening.

Configuration Mode: Access the configuration menu by pressing the red and black control buttons simultaneously. Field Adjustment:

Radar: Tilt the antenna to adjust the depth and width of the activation zone.

Infrared Curtain: Adjust the inclination angle display on the clear scale to position the safety curtain precisely relative to the door's closing edge.

Learning Cycle: After installation, the sensor requires a "learning time" (typically ~60 seconds) to map the static environment.

For detailed technical drawings and the most recent firmware updates, you can visit the dormakaba Download Center.

The dormakaba ProSecure Opti Combi is a dual-technology sensor designed for automatic doors, combining microwave radar for motion detection (opening impulse) and active infrared (AIR) for presence detection (safety threshold). Key Technical Specifications

The sensor is designed to meet safety standards such as EN 16005. Operating Voltage: 11.5 – 32 V DC. Detection Technologies: Microwave (Radar): 24.125 GHz for approach detection.

Active Infrared (AIR): Presence detection curtain to prevent door closure on stationary users. LED Status Indicators: Red: Detection in the safety (AIR) zone. Green: Detection in the activation (Radar) zone.

Alternating Red/Green: Learning/initialisation phase (approx. 25 seconds). Installation & Setup

Installation resources are available through the dormakaba User Guide portal or the DORMA Opti Combi Manual. Wiring Connections: White/Brown: Power Supply (+) and (-). Green/Yellow: Radar output (Activation zone). Pink/Grey: Test input. Blue/Red: AIR output (Safety zone).

Programming: Settings can be adjusted via an internal LCD display and navigation buttons (Red for switching, Black for selection).

C21 (Sensitivity): Adjustable from Level 1 (High) to 5 (Minimal).

C22 (Learning Time): Options include 10s, 30s, 60s, 180s, or 15 minutes. Environmental Considerations

Weather Protection: Use a weather cap if the sensor is exposed to rain; ensure the sensor is not blocked by moving objects like plants or fans.

Interference: Avoid placing fluorescent lights directly within the detection field to prevent false triggers. prosecure opti combi

Latest Content

English - Prosecure Opti Combi Manual

Updated on 01 April, 2025
Learn how to install Observium on Ubuntu 20.04 with our step-by-step guide. Monitor your network devices easily with this powerful network monitoring tool.

The ProSecure Opti-Combi is a robust packaging solution designed for reliability and hygiene. Adherence to the procedures outlined in this report—specifically regarding the Lockout/Tagout safety measures and daily cleaning cycles—is mandatory for safe operation. Regular maintenance of pneumatic parts and seals will ensure the machine retains its high efficiency and accuracy over its operational lifespan.

For electrical diagrams or specific part numbers, users must refer to the full schematic appendix provided in the original manufacturer's documentation.

Prosecure Opti Combi sensors are sophisticated combined radar and infrared systems used primarily for automatic sliding doors. They handle both motion detection (to open the door) and presence detection (to prevent the door from closing on someone). 🛠️ Prosecure Opti Combi: Quick Setup Guide

The Prosecure Opti Combi is designed for high-pedestrian areas. It utilizes K-Band (24.150 GHz) radar technology for activation and Active Infrared for safety. 1. Mounting and Installation Maximum Height: Typically 3 meters (approx. 9.8 feet).

Positioning: Mount the sensor centered above the door opening.

Clearance: Ensure no moving objects (plants, signs) are in the detection field.

Cover Removal: Use a flathead screwdriver to gently pop the side tabs to access the internal buttons. 2. Wiring Connections

The sensor usually employs an 8-pin connector. Standard wiring colors are: Red/Black: Power supply (12V–24V AC/DC). White/Yellow: Radar output (Activation/Opening). Green/Grey: Infrared output (Safety/Presence). ⚙️ Adjusting the Settings

Most Prosecure Opti Combi models feature a digital display or a series of DIP switches and potentiometers to fine-tune performance. Radar (Motion) Adjustments

Sensitivity: Adjust the potentiometer clockwise to increase the detection range.

Directional Sensing: You can set the sensor to detect only "forward" motion (people walking toward the door) to save energy by not opening for people walking away. Infrared (Safety) Adjustments

Field Depth: Adjust the rows of infrared spots to ensure they cover the threshold of the door.

Presence Timer: Set how long the door stays open if an object is stationary in the path (e.g., 2s, 30s, or infinity).

Frequency: If you have two sensors close together, change the frequency setting on one to prevent "crosstalk" or interference. 🔍 Troubleshooting Common Issues Potential Cause Door won't close Infrared detection triggered Clean the lens; check for floor reflections. Door opens randomly Ghosting/Vibration Reduce radar sensitivity; tighten mounting screws. Red LED flashing Internal Error Cycle power; check if the connector is loose. Narrow detection Angle too steep Tilt the radar module upward or downward. ⚠️ Safety and Compliance

To meet EN 16005 or DIN 18650 standards, the infrared safety curtain must be tested daily. The Prosecure Opti Combi features a self-monitoring "Test Input" that the door controller uses to verify the sensor is functional before every closing cycle.

Find the exact wiring diagram for your specific door controller brand (like Dorma, GEZE, or Record)?

This section includes pin-out diagrams, power supply requirements (typically 12V DC), and guidance on connecting magnetic contacts, motion sensors, and sirens. Critical: Always read the safety warnings about disconnecting power before wiring.

Before operating the ProSecure Opti-Combi, all personnel must adhere to the following safety standards to prevent injury and machine damage.

This is often the most thumbed-through section. Common issues like “Low Battery,” “Tamper,” or “Zone Fault” are listed with plain-English solutions.

Where to Download the Official ProSecure Opti Combi Manual in English

Caution: Avoid sketchy third-party PDF sites that may contain outdated or incorrect information.

Pro Tip: Bookmark the PDF on your smartphone. When you’re standing in front of the keypad trying to silence a false alarm, having the manual in your pocket saves time.

Three Common Mistakes to Avoid (According to the Manual)

Even with the English manual in hand, users often trip up on these points:

Final Thoughts

The ProSecure Opti Combi Manual in English is more than a dry technical document—it’s the key to making your security system work for you, not against you. Whether you’re a DIY enthusiast or a certified installer, take an hour to read through the programming and troubleshooting sections.

Next Steps:

Have a specific question about your Opti Combi that the manual didn’t answer? Drop a comment below, and our community might be able to help.

Disclaimer: This post is for informational purposes. Always refer to the original ProSecure Opti Combi Manual in English for your specific hardware revision.

Introduction

The ProSecure Opti Combi is a high-performance, wall-mounted combi boiler that provides both central heating and hot water. This guide is designed to help you understand the installation, operation, and maintenance of your ProSecure Opti Combi boiler, using the manual in English.

Table of Contents

1. Safety Precautions

Before installing or operating your ProSecure Opti Combi boiler, please read and follow these safety precautions:

2. Installation Guide

Refer to the ProSecure Opti Combi manual English (page 5-15) for detailed installation instructions. Here are the general steps:

3. Operating Instructions

Refer to the ProSecure Opti Combi manual English (page 16-25) for detailed operating instructions. Here are the general steps:

4. Maintenance and Servicing

Regular maintenance and servicing are essential to ensure the boiler operates efficiently and safely. Refer to the ProSecure Opti Combi manual English (page 26-35) for detailed maintenance and servicing instructions. Here are the general steps:

5. Troubleshooting

Refer to the ProSecure Opti Combi manual English (page 36-45) for detailed troubleshooting instructions. Here are some common issues and solutions:

6. Technical Specifications

Here are the technical specifications of the ProSecure Opti Combi boiler:

Conclusion

This guide provides a comprehensive overview of the ProSecure Opti Combi manual English. By following the installation, operating, and maintenance instructions outlined in this guide, you can ensure your boiler operates efficiently and safely. If you have any further questions or concerns, please consult the manufacturer's instructions or contact a qualified engineer.

Report: ProSecure Opti-Combi System Operation and Maintenance Manual

Date: October 26, 2023 Subject: Comprehensive Operational and Maintenance Report for ProSecure Opti-Combi Units Prepared For: Equipment Users, Maintenance Personnel, and Facility Management

The ProSecure Opti Combi by dormakaba is a dual-technology sensor designed for automatic sliding doors. It combines radar for motion detection (activation) and active infrared for presence detection (safety) to ensure the door stays open if someone is in the threshold. Key Technical Specifications

Dual Technology: Radar (activation) and Active Infrared (safety).

Mounting Height: Typically installed up to 2.20 meters high.

Safety Compliance: Certified according to EN 16005 for pedestrian safety.

Wiring: Standard 24V supply with specific outputs for activation (radar) and safety (infrared) signals. Installation & Configuration Summary

Mounting: Use the provided adhesive template to drill holes and secure the base plate with screws.

Angle Adjustment: The inclination angle can be modified in 5° increments (0° to 40°), and the PCB can be turned horizontally (-35° to +35°) to refine the detection range. DIP Switch Settings:

DIP 5: Often used to initiate initialization or programming modes.

DIP 6: Must be 'OFF' to allow the use of a dormakaba remote control.

LCD Programming: The "Opti Combi" model features an LCD and control keys. Use the Red key to switch functions and the Black key to select values (e.g., setting the "learning time" for the safety zone).

Detection Area: The radar antenna can be rotated or swapped to create either a wide or narrow detection field. Safety Warnings

Electrostatic Damage: Avoid touching electronic components or using metal tools during installation.

Interference: Keep the sensor away from rain, moving objects (plants, fans), and fluorescent lights to prevent false activations. PrimeTec - BBC Bircher Smart Access

Assuming you mean the ProSecure Opti Combi boiler (English manual) — key useful features:

If you want, I can:

The ProSecure Opti Combi is an EN 16005-compliant sensor for automatic sliding doors that combines microwave radar for motion detection and active infrared (AIR) for safety. The device requires specific mounting and wiring configurations for optimal functionality, featuring adjustments for inclination angle and presence zone coverage. For the official English manual, download the Opti Combi Quick Guide from dormakaba. prosecure opti combi

The dormakaba Prosecure Opti Combi is a combined sensor used for the automatic activation and safety monitoring of sliding doors. It uses radar for motion detection (opening) and active infrared for presence detection (safety threshold). Wiring & Terminal Connections

Standard wiring for the Prosecure Opti Combi typically follows this color-coded configuration: White (-): Power supply (Ground). Brown (+): Power supply ( Green (-): Microwave module output (Activation zone). Yellow (+): Microwave module output. Grey (-): Test input. Pink (+): Test input. Blue (-): Infrared module output (Safety zone). Red (+): Infrared module output. LED Status Indicators The sensor's LED provides immediate feedback on its status: Solid Green: Device is ready for operation. Solid Red: Detection is active (motion or presence). Flashing Green: A remote command has been received. Flashing Red: A fault has been detected. Flashing Red/Green: Initializing after power-on. Configuration & Adjustments

Settings can be adjusted using the onboard red and black buttons or via a remote control.

Activation of Configuration Mode: Press both the red and black buttons simultaneously. The display will change from "A" (Automatic) to "C" (Configuration).

Changing Values: Use the red button to cycle through functions (like sensitivity or learning time) and the black button to modify the value for that function.

Learning Time (Sensitivity): You can set the "learning" or monitoring time for the safety zone. For example, a value of "2" often corresponds to a 30-second learning period.

Cross-Traffic Suppression: This feature can be activated to prevent the door from opening when people walk past it rather than toward it, helping to save energy. Installation Best Practices Mounting Height: Typically installed at heights up to

meters depending on the specific model and safety standards (e.g., DIN 16005).

Environmental Protection: It is recommended to use a weather cap for outdoor applications to prevent interference from rain.

Interference: Avoid placing moving objects like fans or large plants within the detection field.

You can find the full official technical documentation in English through the dormakaba Download Center. prosecure opti combi

The dormakaba Prosecure Opti Combi is a specialized combined sensor designed for automatic sliding doors, integrating radar for movement activation and active infrared for threshold safety. Overview of Functionality

The Prosecure Opti Combi serves two primary roles to ensure efficient and safe door operation:

Activation (Radar): Detects approaching individuals to trigger the door opening. It features direction recognition, meaning it can distinguish between people walking toward the door (opening it) and those walking away (closing it sooner to save energy).

Safety (Infrared): Creates a "light curtain" at the threshold and in front of the door opening. This ensures the door remains open as long as a person or object is detected in the danger zone, preventing accidental closure. Installation and Setup Procedures

Based on technical documentation from dormakaba , the setup involves several critical steps:

Mounting: Use the provided mounting template to drill holes and secure the base plate. Ensure the sensor is protected from rain and away from moving objects like plants or fans that could cause false triggers.

Wiring: Connect the cable according to the color-coded scheme (e.g., white/brown for power, green/yellow for activation output, and blue/red for safety output). It must be operated from a SELV (Safety Extra Low Voltage) supply.

Initialization: Once powered, the sensor enters a "learning phase" (LED flashes red/green for approximately 25 seconds). During this time, the area must be clear of moving objects so the sensor can calibrate to its environment. Field Adjustment:

Mechanical: Adjust the inclination angle (T) and rotation (P) to define the detection zone.

Optical: Partial masking of the optics can be used to further refine the safety area (zones L1, L2, R1, R2, etc.).

Configuration: Specific properties like sensitivity, relay off-delay time, and output logic can be adjusted via a push-button menu or an optional remote control. Safety and Maintenance

Testing: After installation, verify settings by walking into the detection areas. A red LED typically indicates a safety detection, while a green LED indicates activation.

Professional Servicing: In regions like the UK, safety devices for automatic doors should be inspected by a qualified technician (e.g., ADSA certified) at least once a year.

Environment: The sensor is generally rated for temperatures between -15∘Cnegative 15 raised to the composed with power C +50∘Cpositive 50 raised to the composed with power C

. For outdoor use, the manufacturer recommends a weather protection cap. prosecure opti combi

The Prosecure Opti series (Motion/Combi) is designed for automatic door operators, combining radar technology for motion detection with infrared technology for presence detection (in Combi models). The device is engineered to activate, open, and safeguard passage areas, complying with safety regulations like DIN 18650 and EN 16005. 2. Package Contents & Technical Specifications

Contents: Sensor module, mounting cable, fixing screws, and mounting template.

Sensor Type: Microwave radar (motion) and Active Infrared (presence/safety).

Installation Height: Typically optimized for 2.0 to 3.0 meters (check specific unit for maximum range).

Environmental: IP44/IP54 rated (depending on model) for resistance to dust and splashing water. Operating Voltage: Typically 12-24V AC/DC. 3. Installation Guide (English)

Preparation: Drill fixing holes using the provided template on the lintel or door leaf.

Mounting: Secure the mounting bracket to the wall or ceiling. Tilt the bracket if the mounting surface is not parallel to the floor.

Wiring: Connect the cable according to the color codes specified in the manual, ensuring compatibility with the door operator control unit.

Angle Adjustment: Adjust the radar module’s inclination angle to set the detection range. Steeper angle: Shorter detection range. Shallower angle: Longer detection range. 4. Configuration and Programming

Detection Area: Use the mechanical settings to increase or decrease the width and depth of the radar field.

Sensitivity: High sensitivity is recommended for small detection areas, while low sensitivity is better for avoiding traffic interference.

Relay Settings: Configuration options for normally open (NO) or normally closed (NC) outputs.

Combi Presence Field: Adjust infrared spots on the floor to prevent the door from closing while a person is in the threshold area. 5. Troubleshooting “Restart the Motion Sensor

by removing the batteries or power supply and then returning power. Note: Power must be removed for at least 10 seconds to ensure a proper reboot.” Scribd

“Ensure both sides are seated [on the bracket] ... Use handscrews to secure.” Scribd

Door remains open: Increase the hold time, decrease sensitivity, or check if the infrared field is hitting the floor/door, not the person.

Door doesn't detect well: Increase sensitivity, change the antenna angle, or move the sensor further from the door surface.

LED Indicators: Red (Motion), Green (Presence), Amber (Error/Setup). 6. Safety Notes Ensure the power is off during installation.

The system must be operated only by qualified personnel to ensure compliance with safety standards. If you can tell me: The exact model number (e.g., Opti Motion Opti Combi Whether you are dealing with a sliding or swing door

I can give you specific wiring diagrams or calibration steps. ProSecure Opti Motion Sensor Manual | PDF - Scribd

ProSecure Opti Combi is a high-performance combined sensor used primarily for automatic sliding doors. It utilizes Active Infrared (AIR) technology for presence detection (safety) and technology for motion detection (activation). 🛠️ Technical Specifications Mounting Height: 2.0m to 4.0m (approx. 6.5ft to 13ft). Technology: 24.125 GHz Radar (Motion) + Active Infrared (Safety). Power Supply: 12–24V AC/DC. Protection Class: IP54 (Dust and splash-proof). Temperature Range: -20°C to +60°C. 🚦 LED Indicator Guide

The integrated LED provides instant feedback on the sensor's status: 🟢 Green: Standby mode (Operational). Infrared (AIR) safety curtain triggered. 🟡 Yellow: Radar (Motion) detection triggered. 🔵 Blue: Configuration mode or internal test phase. ⚪ Flashing Red: Fault detected / Error state. ⚙️ Configuration & Adjustment The unit is typically adjusted using internal DIP switches remote control 1. Motion Detection (Radar) You can adjust the radar field to be wide or narrow. Sensitivity:

Increase for faster opening; decrease to prevent "ghosting" from vibrating objects. Directionality:

Set to "Forward" (detects only people approaching) to save energy and reduce wear. 2. Safety Detection (Infrared) Curtain Depth: Adjust how close to the door the safety zone reaches. Presence Timer:

Determines how long the door stays open if someone stands still in the threshold (e.g., 30s, 1 min, or infinite). Frequency:

If two sensors are close together, change frequencies to avoid interference. 🔍 Troubleshooting Potential Cause Door stays open Object in safety zone Clear the threshold of mats or signs. Door opens/closes randomly Vibration or rain Lower Radar sensitivity or change tilt angle. LED flashing Red Internal error Cycle power (OFF/ON) or check wiring. No detection No power / Incorrect wiring Check 12-24V input at the terminal block. ⚠️ Safety Precautions Always perform a "walk test" after installation.

Use a damp, soft cloth. Avoid harsh chemicals on the optical lens. Compliance: Ensure settings meet local standards (like ANSI 156.10 If you'd like to dive deeper, I can help you with: DIP switch settings for your specific model. wiring diagram for your door controller (e.g., Record, Besam, Dorma). Instructions on using the handheld remote control for programming. Which of these would be most helpful for your setup?

ProSecure Opti Combi is a sensor system (typically by ) used for automatic doors. It combines technology for motion detection and active infrared technology for safety presence detection. Manual Overview & Key Settings

The following information is compiled from common operating and installation guides for this sensor series. Detection Technologies : Used to detect moving objects (approach detection). Active Infrared

: Used for the "safety curtain" to detect stationary or slow-moving objects in the door's threshold. LED Indicators : Active infrared detection (safety area triggered). : Microwave detection (motion area triggered). Flashing Red/Green

: Device is in a self-test or initialization phase (usually lasts about 10 seconds after power-on). Installation & Programming Tips Mounting Height

: Standard mounting is usually up to 3 meters, but industrial variants (like the Opti Motion Mono) can go higher. Safety Requirements

: Before use, ensure all objects that do not belong in the door area are removed to prevent false calibration. Adjustments Detection Area

: Sensitivity and size of both the microwave and infrared curtains can be adjusted via internal push buttons or dip-switches. Cross-Traffic Suppression

: Important for swing doors to prevent the sensor from detecting the door's own movement. Swing Doors

: When used on swing doors, it is recommended to mount the sensor 20–30 cm above the door edge on the hinge side. Documentation Links

You can find more detailed technical data and wiring diagrams in these resources: ProSecure Opti Motion Stereo Manual (dormakaba/Ahlsell) — Includes specific setup for swing and sliding doors.

ProSecure Opti Motion Sensor Detailed Specifications (Scribd) — Covers antenna characteristics and programming options. or a specific troubleshooting code for this sensor? Prosecure Opti Motion Stereo - Ahlsell

The dormakaba ProSecure Opti Combi is a combined radar and active infrared safety sensor designed for automatic sliding doors. It integrates motion detection for door opening with a light curtain for presence detection to prevent door closure on individuals. Core Functions & Features

Combined Detection: Radar provides the opening impulse, while an active IR light curtain monitors the "danger zone" for anti-crush safety.

Direction Recognition: The sensor can distinguish between people approaching and walking away, closing the door faster to save energy.

Cross-Traffic Filtering: Adjustments allow the sensor to ignore side-to-side traffic that is not intending to enter.

LCD Display: Features an onboard display for precise parameter settings and diagnostics. Wiring & Pin Assignment

The connection cable typically uses the following standard pinout: White: Power Supply (-) Brown: Power Supply (+) 11.5–32 V DC Green/Yellow: Microwave module output (Activation zone) Grey/Pink: Test signal Blue: Active infrared module output (Safety zone) Basic Setup Instructions

Mounting: Use the provided template to drill holes and mount the sensor above the door opening.

Configuration Mode: Access the configuration menu by pressing the red and black control buttons simultaneously. Field Adjustment:

Radar: Tilt the antenna to adjust the depth and width of the activation zone.

Infrared Curtain: Adjust the inclination angle display on the clear scale to position the safety curtain precisely relative to the door's closing edge.

Learning Cycle: After installation, the sensor requires a "learning time" (typically ~60 seconds) to map the static environment.

For detailed technical drawings and the most recent firmware updates, you can visit the dormakaba Download Center.

The dormakaba ProSecure Opti Combi is a dual-technology sensor designed for automatic doors, combining microwave radar for motion detection (opening impulse) and active infrared (AIR) for presence detection (safety threshold). Key Technical Specifications

The sensor is designed to meet safety standards such as EN 16005. Operating Voltage: 11.5 – 32 V DC. Detection Technologies: Microwave (Radar): 24.125 GHz for approach detection.

Active Infrared (AIR): Presence detection curtain to prevent door closure on stationary users. LED Status Indicators: Red: Detection in the safety (AIR) zone. Green: Detection in the activation (Radar) zone.

Alternating Red/Green: Learning/initialisation phase (approx. 25 seconds). Installation & Setup

Installation resources are available through the dormakaba User Guide portal or the DORMA Opti Combi Manual. Wiring Connections: White/Brown: Power Supply (+) and (-). Green/Yellow: Radar output (Activation zone). Pink/Grey: Test input. Blue/Red: AIR output (Safety zone).

Programming: Settings can be adjusted via an internal LCD display and navigation buttons (Red for switching, Black for selection).

C21 (Sensitivity): Adjustable from Level 1 (High) to 5 (Minimal).

C22 (Learning Time): Options include 10s, 30s, 60s, 180s, or 15 minutes. Environmental Considerations

Weather Protection: Use a weather cap if the sensor is exposed to rain; ensure the sensor is not blocked by moving objects like plants or fans.

Interference: Avoid placing fluorescent lights directly within the detection field to prevent false triggers. prosecure opti combi

English - Prosecure Opti Combi Manual