Qidi X-pro Manual May 2026

| Command | Function | |---------|----------| | G28 | Home all axes | | G29 | Auto-bed leveling (if enabled) | | M104 S205 | Set extruder 1 temp to 205°C | | M140 S60 | Set bed temp to 60°C | | M141 S45 | Set chamber temp to 45°C | | T0 / T1 | Switch to extruder 0 (left) or 1 (right) |

The manual often glosses over this, but these are the specific instructions users usually need to reference:

Bed Leveling Procedure:

"Before printing, you must level the build plate to ensure the nozzle is at the correct height.

Z-Offset Adjustment (Software Leveling): qidi x-pro manual

"The QIDI X-Pro utilizes a sensor for automatic leveling compensation. However, you must set the Z-Offset.

The QIDI X-Pro is a fully enclosed, dual-extruder 3D printer known for its versatility (printing both standard filaments like PLA/ABS and advanced materials like Nylon and PC). Reading the official manual before your first print is critical—especially due to its dual-nozzle system and high-temperature capabilities. | Command | Function | |---------|----------| | G28

Manual fix: The extruder gear is stripped or the tension is wrong. Clean the gear with a brass brush. Adjust the tension screw on the extruder lever (clockwise for more grip).

While the physical manual is excellent, it sometimes lags behind community discoveries. Based on official QIDI forums and support tickets, here are advanced tips that act as a "secret manual." "Before printing, you must level the build plate