They Are Billions Calliope Build -
✅ Extreme clearing power – Calliope one-shots groups of executives, mutants, and giants.
✅ Saves resources – No need to mass expensive Snipers early.
✅ Defends chokepoints – Her AoE decimates runner swarms.
✅ Low population cost – She uses 2 oil instead of food/housing.
A tower does not increase a Calliope's fire rate significantly, but it does limit their firing angle. A Calliope on the ground can rotate 360 degrees instantly to shoot a Harpy behind them. On a tower, they have a slow turn radius. Keep them on the ground.
The sky over the colony of New Hope wasn’t blue; it was the color of rusted iron, choked by the eternal smog of the Great Infection. High atop the western ramparts, Calliope checked the tension on her composite bow. She wasn’t like the hulking Soldiers or the soot-covered Snipers. She was a shadow given form, the ultimate expression of the Empire's "Quiet Death" initiative.
"The swarm is four miles out," a scout radioed, his voice trembling. "It’s a Tier 4. Harpies included."
Calliope didn’t blink. She looked down at the Shock Towers humming below her. The Mayor had spent weeks pouring every ounce of gold and wood into her specific training—the Calliope Build. It was a gamble. Instead of a massive wall of fire and lead, the colony relied on her inhuman speed and a specialized grid of Tesla Towers designed to funnel the dead into a narrow "kill box."
As the first wave of runners emerged from the fog, Calliope leaped. She didn't stay on the walls. Using her Agility Perk, she vaulted over the spiked barricades, landing silently in the dirt.
To the untrained eye, she was a blur. She moved in a rhythmic dance, her arrows finding eyes and throats with surgical precision. She wasn't just killing; she was kiting. With every shot, she drew thousands of infected away from the fragile wooden gates and toward the electrified "death corridor."
The Harpies screeched, diving from the clouds. Calliope performed a mid-air twist, releasing three arrows in a single heartbeat. The winged horrors tumbled, pinned to the earth. But the sheer volume of the horde was stifling. The ground shook as a Giant crested the hill, its rotting flesh pulsating. "Now!" Calliope signaled.
The colony's Lucifers opened their fuel valves, but not to spray the front. They created a ring of fire behind Calliope, sealing her in with the horde. It looked like a suicide mission, but it was the final piece of the strategy.
Trapped between the fire and the dead, Calliope’s Veteran Status kicked in. Her attack speed doubled. She became a whirlwind of obsidian glass and carbon fiber. As the Giant lunged, she slid between its massive, decaying legs, planting a high-explosive canister—a gift from the Engineering Center—into its heel.
A deafening roar preceded the explosion. As the Giant fell, it crushed hundreds of lesser undead, creating a temporary ramp. Calliope sprinted up the monster’s back and vaulted back onto the colony walls just as the Shock Towers unleashed a localized storm of blue lightning, vaporizing the remaining thousands.
Silence returned to New Hope, save for the crackle of burning ozone. Calliope wiped a smudge of black blood from her cheek and sheathed her bow. She had held the line. They were billions, but tonight, she was the only one that mattered.
Building Calliope in They Are Billions: A Comprehensive Guide
In the popular real-time strategy game They Are Billions, Calliope is a crucial defensive structure that can make or break your colony's survival. As one of the most powerful artillery units in the game, Calliope provides unparalleled protection against the hordes of infected humans and other threats that seek to destroy your settlement. In this guide, we'll walk you through the process of building Calliope and provide you with valuable tips and strategies to maximize its effectiveness.
Prerequisites for Building Calliope
Before you can start building Calliope, you need to meet certain prerequisites. Firstly, you need to have a sufficient amount of resources, including gold, steel, and oil. The exact resource costs may vary depending on the game's balance and your current level of technology.
Secondly, you need to have a Workshop, which is a fundamental building that allows you to research and construct more advanced structures and units. Make sure you have a steady supply of raw materials and a skilled workforce to construct and maintain your buildings.
Lastly, you need to research the Calliope technology in the Research Tree. This will unlock the blueprint for building Calliope and allow you to start constructing it.
Building Calliope
Once you've met the prerequisites, you can start building Calliope. To do this, follow these steps:
Optimizing Calliope's Placement
The placement of Calliope is critical to its effectiveness. Here are some tips to keep in mind:
Upgrading and Maintaining Calliope
Once you've built Calliope, it's essential to upgrade and maintain it regularly. Here are some tips:
Tips and Strategies
Here are some additional tips and strategies to get the most out of Calliope:
By following these tips and strategies, you can build and maintain an effective Calliope defense that will protect your colony from even the most formidable threats. Happy building!
They Are Billions , is the "fast and agile" hero choice for tactical missions, serving as a high-speed alternative to the heavy-hitting but slow Caelus. Calliope Build Review & Key Stats
Calliope excels at kiting—the practice of moving and firing to stay out of reach of enemies—which makes her superior for clearing large, open areas where movement is critical. they are billions calliope build
Weaponry: She uses "The Devil’s Sisters," dual pistols that have a high fire rate and fast reload but suffer from low base damage and short range.
Pros: Her high movement speed allows her to outrun almost anything on the map and complete tedious search-and-find objectives faster.
Cons: She is extremely fragile. Without the right upgrades, she can be two-shotted by Harpies in later hero missions. Recommended Optimal Build Strategy
Reviewers from the Steam Community and Reddit generally agree that a "Glass Cannon" damage and range build is the most effective.
They Are Billions Calliope Build: A Comprehensive Guide to Dominating the Game
In the world of real-time strategy games, few titles have captured the attention of gamers quite like They Are Billions. Developed by Numantian Games, this steampunk-themed RTS challenges players to build and manage their own colonies in a world overrun by hordes of zombie-like creatures known as the "Infected". One of the most popular and powerful builds in the game is the Calliope, a late-game artillery piece that can obliterate even the toughest enemies. In this article, we'll take a deep dive into the They Are Billions Calliope build, exploring its strengths, weaknesses, and strategies for success.
What is the Calliope Build?
The Calliope is a heavy artillery unit that excels at taking out large groups of Infected and destroying enemy buildings. It's a crucial part of any end-game build, providing a devastating area-of-effect attack that can clear out waves of enemies with ease. The Calliope build typically revolves around constructing a well-defended colony with a strong economy, producing a large number of Calliopes, and using them to blast through enemy defenses.
Key Components of a Successful Calliope Build
To execute a successful Calliope build, you'll need to focus on several key components:
Step-by-Step Guide to Building a Calliope
Building a Calliope in They Are Billions requires careful planning and resource management. Here's a step-by-step guide to help you get started:
Tips and Strategies for Calliope Build Success
To dominate the game with your Calliope build, keep the following tips and strategies in mind: ✅ Extreme clearing power – Calliope one-shots groups
Common Mistakes to Avoid
While the Calliope build can be incredibly powerful, there are several common mistakes to avoid:
Conclusion
The Calliope build is a powerful and versatile strategy in They Are Billions, offering a high degree of flexibility and firepower. By following the tips and strategies outlined in this article, you can create a dominant Calliope build that will help you conquer the game. Remember to stay flexible, adapt to changing circumstances, and always be on the lookout for opportunities to improve your build. With practice and patience, you'll be well on your way to becoming a master of the Calliope build and dominating the world of They Are Billions.
Additional Resources
For more information on the Calliope build and They Are Billions in general, be sure to check out the following resources:
By combining these resources with the information provided in this article, you'll be well-equipped to tackle the challenges of They Are Billions and emerge victorious with your Calliope build.
They Are Billions Calliope Build: A Comprehensive Guide
The Calliope is a unique and powerful defensive structure in the game They Are Billions, known for its ability to deal massive damage to hordes of infected humans while also providing a significant boost to the player's gold and research capabilities. This write-up will guide you through the essential aspects of building and utilizing the Calliope effectively in your gameplay.
The Calliope is an advanced defensive turret that excels at dealing damage to hordes of enemies. It has a high damage output but requires a significant amount of resources to build and maintain.
❌ Cannot shoot air – A single harpy or spitter will kill her if unprotected.
❌ Slow fire rate – Gets overwhelmed by massive swarm if not microed.
❌ Expensive tech path – Delays stone workshops and shocking towers.
❌ Oil dependency – If you lose your oil platform, she becomes useless.
The Calliope is a formidable defensive structure in They Are Billions that offers a blend of direct combat capability and economic benefits. By understanding its construction requirements, strategic placement, and operational benefits, players can significantly enhance their defensive capabilities and economic stability. Whether you're focusing on a peaceful economic strategy or preparing for the night horrors, incorporating the Calliope into your base can provide a substantial advantage in the fight against the infected hordes.
| Attribute | Value | |-----------|-------| | Cost | 500 gold, 2 oil (late campaign) | | Damage | High (explosive AoE) | | Attack speed | Slow but powerful | | Special | Explosive shots (damage multiple enemies) | | Weakness | Cannot target flying enemies |
⚠️ Critical limitation: Calliope cannot attack flying units (harpies, spitters, banshees, dragons). You must keep Soldiers, Rangers, or Wasps for air defense. A tower does not increase a Calliope's fire
You saved my life! thank you thank you thank you so much!!
I’m happy to help, you’re welcome! 🙃
Same here
How to upload multiple images?
¡Hola!
Add “[]” to the name of the input tag:
<input type="file" name="profilepicture[]" />Very good code, thank you!
You helped me with my graduation.
I have the following error: “Call to undefined function mime_content_type()”
Hey Oliver,
What is your PHP version?
¡Hola Misha! Hi! Gracias, Thank you.
Sorry to bother you, in case you could guide me. I am a photographer and I would like to add many photos to my WP from home.
I have created a function that generates images of different size to the original that my theme needs (66×66, 200×133 …). Thus the weight of the images is much lower than those automatically generated by WP.
To streamline my workflow in WP, I thought about creating a function to upload the images to / wp-content / uploads / 2018/07 via php (now what I do is copy them directly into the folder of the WP installation).
I have also generated a query to the DB to add the necessary information to wp_post and wp_postmeta for each image.
I can use the uploaded image with no problem, I can add it to an entry or page and it looks correctly, both in the WP editor and later on the web.
However, in the WP media gallery the image is not shown to me. It’s like it does not associate the data in the database with the image that I copied in / uploads / 2018/07.
I have noticed and there is no other reference to the images apart from the ones I have already entered in the MYSQL query.
Maybe what I want to do is complex and I should give up. But I would like to at least know where the error may be.
Thanks for your time.
A hug from Granada, Spain.
Hi Alejandro 🙃
Not sure how your function looks like, but I think the code below should help you.
P.S. Never give up 💪
Thank you very much Misha!
Unfortunately I do not know how to implement what you have indicated :(
I do not know how to use the WP functions in my code.
I will try to explain what I have done.
I created a .php out of WP with a connection to a BD (out of WP). I have created a function that runs through a directory with photos to be able to visualize them and move them by assigning an order to the photos and adding that information to the BD (out of WP).
My idea is to generate the content of a post outside of WP, including directly on the WordPress DB the information that I add in my BD (out of WP).
When I read your answer I thought, maybe if I move my .php to the WP installation directory, maybe it will work. But I have to add the WP functions to my .php.
I did it by adding require_once (‘../ wp-load.php’), but if I see my .php in the browser, I get a 404 error code with the appearance of my WP theme.
I get lost here, I have no idea how I could see my page created in .php without the theme, being able to use the functions of WP, for me to be able to test the code that you have given me.
Thank you very much for everything Misha, you have been very kind. I’m sorry I can not put into practice the code you’ve given me, I’m sorry.
A hug.
Oh!
I have discovered
define('WP_USE_THEMES', false);Sorry, at this moment I’m not 100% sure what you’re doing…
Ok, you have a PHP script, you’ve placed it in your WP directory. It is OK, but if it lays directly in WP directory, not in a subfolder, here how to include WP Environment correctly:
require_once ( dirname(__FILE__) . '/wp-load.php' );Once you included this file, you can place the code I gave you above in it too.
Hi Misha, thank you very much for your time. You’re very kind. “Un tipo cojonudo”. A great guy we say in Spain.
I have tested your code and it works great. What I’m going to do is try to implement it in my code, to see if I’m capable.
Let’s see if I can explain what I want to do. I will be putting a numbered list to see if I explain myself better.
1. I work on localhost with wamp.
2. I have a folder with photos outside of the WordPress installation directory.
3. These photos are the ones I want to add to WordPress. Upload them to the uploads directory.
4. I create a function that runs through the directory of the photos. Could I avoid the form submit? I think that this is the point at which I am not able to implement your code with mine. I do not know exactly how to do it. (Right now I am working on this point).
Thank you very much. Thank you very much.
A hug.
Yes, I understand you correctly.
If you need help with the code, I can write it for you, just contact me.
I have enjoyed reading this thread and it restores a bit of faith in humanity for me. Great people!
You are a champion!
This is awesome! It is helping me to finish up a custom plugin I am developing. I have one question: how would I go about displaying the uploaded image using a shortcode?
Hi Melissa,
I need more details.
Please could you help me back giving the snippet for the uploading multiple files from frontend with one fixed featured image and the rest other pictures as in a gallery in WordPress.
Hi,
sure,
If you would like to upload multiple files, you can just add
multipleattribute to your input field and do not forget to add[]to the field name.<input type="file" name="profilepicture[]" multiple />After that you have to process
$_FILES['profilepicture']as an array.To attach images to a post, add its ID as a third parameter of
wp_insert_attachment()function.To set an image as a featured image, use this:
set_post_thumbnail( $post_id, $attachment_id );You are a champion!
how to save uploaded image in custom post type post in custom field?
Hi,
Would you like to save the image ID or url ?
actually i need that uploaded image should be upload in media and custom post type post in custom field
Perfect! But a question, how do I delete the image from the database as soon as the user sends another one?
wp_delete_attachment()🙃Hey buddy, thank you so much!
Hi
First of all great function I love it!
But I need to have a extra function here instead of
I need a function to say if (empty) the $upload_id = $variable
Will be using it with update_post_meta and not instert_post can you give me a code or point me in the right direction please.
Hi Wilhelm,
So, you would like to have some kind of placeholder here, right?
Thank you so much :)))))
thanks a lot man
i love you
I want to leave a comment because I learn from this. This code save a lot of time and efforts. Thank you so much.
Great stuff, as always, thank you Misha!
You’re welcome! 🙏🏼 😌
Thank you X 1000000000000000
Muchas gracias misha desde argentina
Merci infiniment ;) !!!
Hi,
I’m try upload files mp3 but I have response error:
“http_request_failed”: [“A valid URL was not provided.”]
Is there any chance that your file is on localhost or blocked with http auth?
if i try to upload a “jpg” image, it creates the tmp file like /var/tmp/15524-muF7NB.tmp and wp_handle_sideload prints error “Sorry, you are not allowed to upload this file type.”. Whats wrong with my file input?
you probably have some kind of data trailing the image your trying to upload
for example website.com/foler/your-new-image.jpg?asdf
You need to trim off the ?asdf part of the URL
With something like this:
wp_handle_sideload returns null with php 8 for some reason.
I think this could be also done through the WP REST API.
Absolutely, here is how.
I think this is exactly what I am looking for. I need to upload to Media Lib via api with only a URL. Tech wizardry – love it!
Thank you!
Hey!
Thank you for that code snippet – it saved a lot of time and nerves on my end =)
But … currently, I’m running into the problem, that Subscribers seem not to be allowed to upload attachments …
As long as I’m submitting the upload as logged in administrator, all goes fine – but as soon as I change to a logged in subscriber, it just fails … adjusting `wp_insert_attachment` to use the 4th parameter for returning error objects did not make a clue … and currently I’m totally puzzled about that :(
Probably you have an idea, where I forgot to search for a solution? From my point of view, using that functions it’s in the coders responsibility who can access the form to upload media and WP should not restrict that any further, should it?
Thanks a lot!
Thank you