V2000-c Rfid Access Control User Manual -
| Parameter | Value | | :--- | :--- | | Model | V2000-c | | Operating Voltage | 10V – 14V DC (12V nominal) | | Standby Current | ≤ 80mA | | Maximum Current | ≤ 150mA (excluding lock) | | Relay Contact Rating | 3A @ 30V DC (resistive) | | RFID Frequency | 125kHz (EM4100) or 13.56MHz (Mifare S50/70) | | Read Range | 2-5 cm depending on card type | | User Capacity | 500 (cards + PINs) | | Event Log | None (standalone) | | Operating Temperature | -20°C to +60°C (-4°F to 140°F) | | Humidity | 10% – 90% (non-condensing) | | Dimensions (mm) | 120 x 78 x 25 |
| Mode | Command | Description |
| :--- | :--- | :--- |
| Card Only | *Master# → 3 → 1# | Requires valid card only |
| Card + PIN | *Master# → 3 → 2# | Requires card and matching PIN |
| PIN Only | *Master# → 3 → 3# | Enter PIN on keypad |
If you’d like, I can convert this into a printable one-page quick-start, a detailed step-by-step installer checklist, or a wiring diagram tailored to your specific V2000-C model — tell me which. V2000-c Rfid Access Control User Manual
(Invoking related search terms...)
The V2000-C RFID Access Control is a standalone, single-door system supporting card-only, PIN-only, and card+PIN authentication modes with up to 2,000 user capacity. Key features include a Wiegand 26 interface, Tamper alarms, adjustable door delay, and compatibility with 125KHz EM cards. For more detailed technical specifications, visit goldbridgesz.com www.goldbridgesz.com | Parameter | Value | | :--- |
V2000-C RFID Access Control is a standalone single-door security system designed for offices, residential buildings, and secure facilities. It supports up to 1000 users
and multiple entry modes including RFID cards (125KHz), PIN codes, or a combination of both. Sesame Access Co., Ltd. Technical Specifications Specification Power Supply 12VDC ± 10% User Capacity 1000 users Reading Distance 3 – 8 cm (1.18~2.36in) 125KHz EM Standard Unlock Relay Door Open Time Adjustable from 0 to 99 seconds Dimensions 119 x 76 x 21 mm (some models 118 x 118 x 20 mm) Installation and Wiring The unit should be mounted approximately 1.2 meters above the ground and roughly 0.5 meters from the door for optimal accessibility. +12V DC power. Black Wire: GND (Ground). Purple Wires: Doorbell button output. Wiegand Interface: | Mode | Command | Description | |
Supports WG26 for connecting external readers or controllers. www.goldbridgesz.com Programming Guide V2000-c Access Control Manual - Facebook
The V2000-c supports two adding methods: by card swipe or by manual ID entry.
Method A (Swipe to Add – Fastest):
Method B (Manual Card UID Entry – For Duplication):