Scientific intelligence platform for AI-powered data management and workflow automation
Statistical analysis and graphing software for scientists
Bioinformatics, cloning, and antibody discovery software
Plan, visualize, & document core molecular biology procedures
Proteomics software for analysis of mass spec data
Electronic Lab Notebook to organize, search and share data
Modern cytometry analysis platform
Analysis, statistics, graphing and reporting of flow cytometry data
Intelligent panel design & inventory management for flow cytometry
Rating: 8.7/10
Best for: Medium-to-large dental labs that need a reliable, precise, and fast furnace for veneers, crowns, bridges, and pressing ceramics.
Not for: Budget startups or labs that exclusively sinter high volumes of zirconia (dedicated sintering furnaces are more efficient for that).
The Vacumat 50 UPD is an updated version of Vita’s legendary Vacumat 40/50 line. It improves temperature uniformity, vacuum control, and user interface while keeping the robust build quality that made its predecessors industry staples.
The furnace utilizes a PtRh-Pt (Platinum Rhodium-Platinum) thermocouple housed within a ceramic protection tube. The temperature range spans from 0°C to 1600°C (optional up to 1650°C with specific firmware), with a heating rate adjustable from 1 to 99°C per minute. The stability is rated at ±1°C, ensuring that even multi-layer ceramics fire without distortion.
The Vita Vacumat 50 UPD is an autoclave/sterilizer model designed for dental and small medical practices. It is a tabletop steam sterilizer intended for processing handpieces, instruments, glassware, and wrapped/unwrapped items using saturated steam under pressure. The unit emphasizes compact footprint, cycle flexibility, and compliance with common sterilization standards.
| Problem | Likely cause | Fix | |---------|--------------|-----| | Firing turns gray | Air leak or vacuum too low | Check door seal; run vacuum test program | | Temperature won’t reach setpoint | One or more heating rods failed | Measure resistance; replace rods in pairs | | Error “Vacuum not reached” | Pump oil dirty or seal leak | Change oil; inspect door gasket | | Uneven glaze | Muffle dirty or old thermocouple | Clean muffle with zirconia sand; replace TC |
Since VITA has moved support to their newer lines, third-party suppliers are your best friend.
| Part | Common Supplier | Typical Cost (USD) | | :--- | :--- | :--- | | Muffle (Heating Element) | Dental Lab Parts Co. | $400 – $600 | | Door Gasket (Seal) | Patterson Dental | $80 – $120 | | Vacuum Pump (Vacu Prep) | Welch / Gardner Denver | $500 – $700 | | Thermocouple (Type S) | Omega Engineering | $150 – $200 | | Display Board | Ivoclar/VITA used parts | $250 – $400 |
Pro Tip: When searching for parts online, use the exact keywords: "VITA VACUMAT 50 UPD muffle" or "VACUMAT 50 UPD display pcb".
| Feature | Vita Vacumat 50 UPD | Ivoclar Programat CS6 | VITA VACUMAT 6000 | |---------|---------------------|------------------------|--------------------| | Price (approx.) | $6,000–7,500 | $8,500–10,000 | $9,000–11,000 | | Touchscreen | No | Yes | Yes | | Max temp | 1,600°C | 1,600°C | 1,600°C | | Preset programs | 100+ | 200+ | 300+ | | Zirconia sintering | Yes (slow) | Yes (slow) | Better optimized | | Service cost | Moderate | High | Moderate | | Best use | General ceramic + press | All-round + pressing | High-end ceramic |
Rating: 8.7/10
Best for: Medium-to-large dental labs that need a reliable, precise, and fast furnace for veneers, crowns, bridges, and pressing ceramics.
Not for: Budget startups or labs that exclusively sinter high volumes of zirconia (dedicated sintering furnaces are more efficient for that).
The Vacumat 50 UPD is an updated version of Vita’s legendary Vacumat 40/50 line. It improves temperature uniformity, vacuum control, and user interface while keeping the robust build quality that made its predecessors industry staples.
The furnace utilizes a PtRh-Pt (Platinum Rhodium-Platinum) thermocouple housed within a ceramic protection tube. The temperature range spans from 0°C to 1600°C (optional up to 1650°C with specific firmware), with a heating rate adjustable from 1 to 99°C per minute. The stability is rated at ±1°C, ensuring that even multi-layer ceramics fire without distortion. vita vacumat 50 upd
The Vita Vacumat 50 UPD is an autoclave/sterilizer model designed for dental and small medical practices. It is a tabletop steam sterilizer intended for processing handpieces, instruments, glassware, and wrapped/unwrapped items using saturated steam under pressure. The unit emphasizes compact footprint, cycle flexibility, and compliance with common sterilization standards.
| Problem | Likely cause | Fix | |---------|--------------|-----| | Firing turns gray | Air leak or vacuum too low | Check door seal; run vacuum test program | | Temperature won’t reach setpoint | One or more heating rods failed | Measure resistance; replace rods in pairs | | Error “Vacuum not reached” | Pump oil dirty or seal leak | Change oil; inspect door gasket | | Uneven glaze | Muffle dirty or old thermocouple | Clean muffle with zirconia sand; replace TC | Rating: 8
Since VITA has moved support to their newer lines, third-party suppliers are your best friend.
| Part | Common Supplier | Typical Cost (USD) | | :--- | :--- | :--- | | Muffle (Heating Element) | Dental Lab Parts Co. | $400 – $600 | | Door Gasket (Seal) | Patterson Dental | $80 – $120 | | Vacuum Pump (Vacu Prep) | Welch / Gardner Denver | $500 – $700 | | Thermocouple (Type S) | Omega Engineering | $150 – $200 | | Display Board | Ivoclar/VITA used parts | $250 – $400 | 500 | $8
Pro Tip: When searching for parts online, use the exact keywords: "VITA VACUMAT 50 UPD muffle" or "VACUMAT 50 UPD display pcb".
| Feature | Vita Vacumat 50 UPD | Ivoclar Programat CS6 | VITA VACUMAT 6000 | |---------|---------------------|------------------------|--------------------| | Price (approx.) | $6,000–7,500 | $8,500–10,000 | $9,000–11,000 | | Touchscreen | No | Yes | Yes | | Max temp | 1,600°C | 1,600°C | 1,600°C | | Preset programs | 100+ | 200+ | 300+ | | Zirconia sintering | Yes (slow) | Yes (slow) | Better optimized | | Service cost | Moderate | High | Moderate | | Best use | General ceramic + press | All-round + pressing | High-end ceramic |