Cause: VMware throttles bandwidth for standard accounts. Solution: Try downloading during off-peak hours (UTC early mornings). Alternatively, use a download manager that supports resumable transfers.
Cause: The vCenter Server uses self-signed certificates or a non-public CA. Solution: During OVA deployment, check the box “Ignore certificate warnings” only for lab environments. For production, ensure your VMCA (VMware Certificate Authority) is trusted by the appliance. vmware vsphere replication 8.5 download
Note: Broadcom (VMware’s owner since November 2023) has moved many downloads behind a Support Portal paywall. Free registration no longer grants access to vSphere Replication 8.5 without an active production license. Cause: VMware throttles bandwidth for standard accounts
A common question preceding any download is licensing. vSphere Replication 8.5 is not a standalone free product. It is included with the following vSphere licenses: Note : Broadcom (VMware’s owner since November 2023)
If you have a valid license for any of the above, you are entitled to use vSphere Replication at no additional cost. However, you must download the appliance from VMware’s official portal.
[ 35HD-NAS-E ] MRT GigaNAS 35HD-NAS-E 3.5" SATA Single Bay NAS (gemini) ================== !!! IMPORTANT NOTICE !!! ================== This firmware image is compatible with factory bootloader only ============================================================== Product specification: Vendor: MRT Communication Ltd. CPU/SoC: Cortina Systems/Storlink devices CS3516/SL3516 (FA526) @ 300MHz (ARM) Memory: 64 MiB (DDR1 SDRAM) Flash size: 16 MiB (Parallel NOR): 3 MiB for kernel and 6+6 MiB for rootfs (1 MiB misc: boot, VCTL, FIS, config) Bootloader: Storlink Boot Loader (zImage) Ethernet ports: 1 x 1000 Mbps (PHY: Marvell 88E1111) Wireless: None MiniPCI slots: None USB ports: 1 x USB 2.0 (back side) Input voltage: 12V DC / 2A via Philmore 258 Barrel Plug, Type: Adaptaplug N (Polarity: Center positive wiring) RTC battery: CR2032 / 3V lithium battery UART settings: 19200 baud, 8-N-1 mode (TTL compatible logic levels) UART pinout: JP4 / Vcc (3.3V): 1, RX: 2, TX: 3, GND: 5. Device alias: Multicase HD-35SN ============================================================== NOTICE: This image works with the official package repository. ============================================================== Files: - openwrt-15.05.1-gemini-mrt-giganas-35hd-nas-e-zImage.img LZMA kernel (parition: Kern), - openwrt-15.05.1-gemini-mrt-giganas-35hd-nas-e-bootlog.txt device bootlog (dmesg), - openwrt-15.05.1-gemini-mrt-giganas-35hd-nas-e-squashfs.img squashfs filesystem (parition: Ramdisk), - openwrt-15.05.1-gemini-mrt-giganas-35hd-nas-e-sysupgrade.tar.gz sysupgrade image, - openwrt-15.05.1-gemini-mrt-giganas-35hd-nas-e-packages.txt packages list (opkg list-installed), - openwrt-15.05.1-gemini-mrt-giganas-35hd-nas-e.md5 MD5 checksum. ========= CHANGELOG ========= Chaos Calmer 15.05.1 (r48532) - openwrt-15.05.1-gemini-mrt-giganas-35hd-nas-e* - 2018-03-14 ------------------------------------------------------------------------------------------- [UPD] Updated to Openwrt Chaos Calmer v15.05.1 (r48532), [NEW] Darkmatter theme for LuCI added. Chaos Calmer 15.05 (r46767) - openwrt-gemini-mrt-35hd-patafix+jp3-led* - 2016-07-30 ----------------------------------------------------------------------------------- [FIX] Memory size modified to 64MB, [MOD] The device has no Machine ID so it uses ID of Raidsonic NAS4210-B: 0x1fff (8191), [NEW] JP3 (GPIO #14) unsoldered LED pin support added (mrt35hd:jp3:hdd -> idedisk), [FIX] Default trigger changed for JP3 pin: idedisk (kernel based), [FIX] ATA Channel #1 disabled, [NEW] Kernel modules compiled into the kernel: leds-gpio, ledtrig-ide-disk. [FIX] Sysugrade and ramdisk image published and firmware size fixed (hddapp removed), [NEW] Necessary kernel modules and packages added to rootfs image. [ FIRMWARE SUMMARY ] Kernel version: 3.18.23 Image format: zImage (LZMA) Rootfs Type: SquashFS Build server: itsuki.dev.dtech.hu Build host: Debian GNU/Linux, Version 7.0 Latest build: 2018-03-14 Status: PRODUCTION TEST RESULT: OK