Wis09abgn Driver Windows 10 -

Samsung WIS09ABGN USB adapter (LinkStick) does not have official Windows 10 drivers from Samsung, as it was designed primarily for 2009-2010 Samsung TVs and Blu-ray players. However, it can be made to work on Windows 10 by using drivers for compatible chipsets. Driver Installation Guide The adapter uses a Ralink RT2850 chipset, which is the same as the Linksys WUSB600N v2 Microsoft Learn Download Compatible Drivers : Locate and download the Linksys WUSB600N v2 drivers (often found on the Linksys Support site or community forums). Access Device Manager : Right-click the Start button, select Device Manager

, and find the unidentified device, often listed as "802.11 n WLAN" under "Other devices". Update Driver Manually Right-click the device and select Update Driver "Browse my computer for driver software" "Let me pick from a list of device drivers on my computer" "Have Disk"

and browse to the folder where you unzipped the downloaded Linksys drivers. Select the file (e.g., netr28u.inf ) and click Select Model : From the list of devices, select

Linksys WUSB600N Wireless-N USB Adapter with Dual-Band ver. 2 Confirm Warning : Windows may warn about compatibility; select to proceed with the installation. Technical Report : Ralink RT2850-based 802.11 adapter. Hardware Interface : USB 2.0. Data Rates : Supports IEEE 802.11a/b/g and 802.11n (up to 300 Mbps).

: EOL (End of Life). Users often find it easier to replace the aging adapter with a modern, plug-and-play USB Wi-Fi dongle for better performance and native support. Amazon.com alternative USB Wi-Fi adapter that is natively compatible with Windows 10/11? wis09abgn driver windows 10

SOLUTION: Use a Samsung WIS09ABGN USB Wireless adapter on your Windows PC : r/techsupport

If you’ve recently upgraded to Windows 10 or performed a clean installation, only to find your Wi-Fi has vanished, you may have stumbled upon a cryptic device in Device Manager labeled wis09abgn. This identifier refers to a common but often misidentified wireless network adapter. Getting the correct driver for it can be frustrating, but this guide will walk you through everything you need to know.

Struggling with the mysterious "Wis09abgn" device in your Device Manager? You are not alone.

If you have recently installed Windows 10 on an older laptop—particularly a white-label or generic notebook from brands like Jumper, Teclast, Chuwi, or older Dell/Latitude models—you may have noticed a yellow exclamation mark next to a device labeled "Wis09abgn" . Samsung WIS09ABGN USB adapter (LinkStick) does not have

This article provides a definitive guide to fixing the Wis09abgn driver error on Windows 10. We will cover what this device actually is, how to find the correct driver, a step-by-step installation guide, and troubleshooting common errors.

Before diving into solutions, verify that your issue is driver-related. Common symptoms include:

If you see any of these, follow the methods below.

Sometimes the driver is present but corrupted. Here’s how to refresh it: If you’ve recently upgraded to Windows 10 or

If it fails, repeat the process but instead of restarting, use Method 2 above to manually install after uninstallation.

Windows 10 is aggressive about automatically finding drivers. Surprisingly, Microsoft’s update catalog contains a legacy Ralink driver that works perfectly for Wis09abgn.

Steps:

After a restart, your Wi-Fi should be active. This method succeeds in about 70% of cases.

| Step | Action | |------|--------| | 1 | Identify the chipset: Ralink RT3070 or RT5370 | | 2 | Download legacy Ralink driver (v5.01.26+) | | 3 | Manually install via Device Manager > Have Disk | | 4 | Use netr28ux.inf or rt2870.inf | | 5 | Disable driver signature enforcement if blocked | | 6 | Reboot and test Wi-Fi |