Write Imei R3.0.0.1 -

  • If available, verify the current IMEI by using the tool’s Read/Detect function (Read IMEI). Compare with original.
  • Click Write (or Start/Flash) to begin writing. Monitor the log/status window for success messages.
  • Once complete, disconnect and reboot the device.
  • Verify IMEI via dialer *#06# or Settings → About Phone. Confirm both IMEIs (if applicable).
  • Option 3 – Meta Mode: Ensure "Auto detect meta mode" is checked.
  • Write Option: Choose "Write IMEI" (do not select "Repair NV" unless advanced).
    • POST /v3/imei/validate
"imei": "490154203237518",
  "strict_tac_check": true,
  "region_hint": "EU"

    Recommended migration path:

    WriteIMEI R3.0.0.1 is a specialized software utility used to repair or restore the IMEI (International Mobile Equipment Identity) on mobile devices powered by Spreadtrum (SPD) or UNISOC chipsets. 🛠️ Key Features

    IMEI Repair: Specifically designed for fixing "Invalid IMEI" or "IMEI 0" issues after flashing a new ROM.

    Multiple Writing: Supports writing IMEI for Single, Dual, or Triple SIM devices.

    Additional Data: Can also write Bluetooth addresses, Wi-Fi addresses, and Serial Numbers (SN). write imei r3.0.0.1

    Compatibility: Works with older Spreadtrum and newer UNISOC processors (e.g., Narzo 50a). 📝 How to Use WriteIMEI R3.0.0.1

    Install Drivers: Download and install the Spreadtrum/UNISOC USB Drivers on your PC. Launch Tool: Run WriteIMEI.exe as an administrator. Configure Mode: Click on Mode Select.

    Choose Normal Mode (or Diag Mode depending on device state). Enter IMEI:

    Input the 15-digit IMEI numbers found on your device's original box or under the battery. Connect Device: Power off your phone. If available, verify the current IMEI by using

    Connect it to the PC via USB (sometimes requires holding a "Boot Key" like Volume Up or Down).

    Start Process: Click Write or Start. You should see a green PASS message when finished. ⚠️ Important Considerations

    Legal Warning: Changing an IMEI to a number other than the one originally assigned to the device is illegal in many countries. This tool should only be used for repair purposes.

    Backup First: Always back up your current NVRAM/NVDATA before attempting an IMEI write. Option 3 – Meta Mode : Ensure "Auto

    Hardware ID: To find your original IMEI, dial *#06# on your phone's keypad.

    💡 Pro Tip: If the tool doesn't detect your phone, check Device Manager for an "SPD U2S" or "COM" port entry to ensure the drivers are working correctly. If you'd like, I can help you with: Finding the specific drivers for your Windows version. The Boot Key combination for your specific phone model. Troubleshooting a "Fail" or "Time Out" error. How to use Spreadtrum WriteIMEI tool

  • Locate the Write IMEI button (sometimes labeled "Write" or "Repair").
  • Click the button.

    • Attempting to write an IMEI without proper preparation can brick your device. Follow this checklist:

  • Windows PC (7/10/11): The tool is exclusively Windows-based.
  • MediaTek USB Drivers (v3.0.1 or later) : Install proper VCOM drivers. Without these, the PC will not detect the phone in META mode.
  • Scatter File (MTxxxx_Android_scatter.txt) : Extracted from the phone’s stock ROM.
  • Modem Database (BPLGUInfoCustom...): A file ending in .db or .bin specific to your phone’s baseband version.
  • AP Database (APDB_MTxxxx...): Usually found inside the system/etc/mddb/ folder of a full firmware dump.
  • Fully Charged Device: Any power interruption during the write process can corrupt the NVRAM beyond software repair.