Double-click "I/O Configuration" in the Workspace. Assign:
Unlike later versions (3.8 or 4.x) which sometimes introduce bugs or require hardware firmware updates, 3.7 is widely regarded as the "Goldilocks" release—stable enough for production environments yet modern enough to support advanced function blocks and structured text.
One of the most praised aspects of version 3.7 is its online monitoring capability. Users can connect via RS232, RS485, or USB (depending on the PLC model) and watch bit and register states update in real time. The "Status Monitoring" window allows you to force contacts ON/OFF and modify data registers (D) while the PLC is running—critical for troubleshooting.
Once launched, the Xinje Plc Program Tool 3.7 interface is divided into five key areas:
Allows real-time monitoring of D-registers (Data registers) and M-bits (Internal relays) while online.
Q1: Can I use Xinje PLC Program Tool 3.7 on Windows 11? Yes, but install the legacy USB drivers manually. Windows 11 blocks unsigned drivers by default; you must restart with "Disable Driver Signature Enforcement."
Q2: Why does my timer (T0) not work? Ensure you have set the Timer Base. In XC series, T0 is 100ms base. To get 10 seconds, set value to K100.
Q3: Can I simulate without a PLC attached? No. Version 3.7 does not have an offline simulator. You must connect to hardware.
Q4: Is there a library for PID auto-tuning?
Yes. Use the PID instruction from the application library. It supports auto-tuning when you set the sampling time and setpoint correctly.
Q5: How do I convert a project from Tool 3.7 to AutoShop?
Open AutoShop → Project → Import → Select *.XGP file. AutoShop will convert it, but watch for differences in high-speed instruction syntax.
This article is intended for educational and informational purposes. Always consult your machine’s safety manual before downloading or modifying PLC logic. Xinje and Program Tool 3.7 are trademarks of Xinje Electronic Co., Ltd.
The Xinje PLC Program Tool 3.7 is the primary engineering environment used for creating, deploying, and maintaining automation programs for Xinje programmable logic controllers. The executable file for this software version is typically named XDPPro.exe. Key Features and Functionality
Program Development: Provides an intuitive workspace to build control logic using supported PLC languages (like Ladder Logic).
Device Management: Allows for the configuration of devices, communications, and project parameters from initial commissioning through long-term service.
Real-time Monitoring: Users can monitor live I/O status and internal tags in real-time to verify system performance.
Diagnostics: Includes forcing functions and diagnostic views to isolate hardware or logic issues, helping to reduce equipment downtime.
Documentation Tools: Supports clear project documentation with cross-references and comments for better traceability.
Project Maintenance: Facilitates project backups and restoration, ensuring safe change management for maintenance teams. Software Access
The software and related manuals can be accessed via official channels to ensure version compatibility and safety:
Download Resources: Software updates, including versions like TouchWin Pro 2.3.7, and full product catalogs are available at the Wuxi Xinje Electric Co., Ltd. Download Center.
Technical Manuals: Hardware and instruction manuals for series like XD/XL and XG provide critical wiring and safety guidelines that must be followed before using the programming tool to modify controller programs. AI responses may include mistakes. Learn more Download Center - Wuxi Xinje Electric Co., Ltd. Xinje Plc Program Tool 3.7
Create a Project: Open the tool and select your PLC series (e.g., XC, XD, or XL).
Setup Communication: Identify the correct COM port via Device Manager or configure an Ethernet/IP address to link your PC and PLC.
Ladder Logic: Use the workspace to build control logic using contacts (X), coils (Y), and internal bits (M). 🛠️ Key Programming Elements
Timers (TMR): Use the TMR command with a timer number (e.g., T100) and a set value (e.g., K50 for 5 seconds).
Registers (D): Load integer values into word registers (like D10 or D11) for data handling.
Instructions: The tool supports basic bit logic, pulse output, and advanced motion control. 📤 Upload & Download
Backup (Upload): Use the "Upload from PLC to PC" button to retrieve and view the existing program from the controller.
Deploy (Download): Once your code is ready, use "Download program online" to send the logic to the PLC hardware.
Ladder Monitor: Navigate to the online section to observe live bit statuses and modify values in real-time. ⚠️ Safety & Best Practices
Xinje PLC Program Tool 3.7 (widely recognized by its executable name, XDPPro) is the primary engineering environment used to program and maintain modern Xinje programmable logic controllers. Specifically designed for the XD and XL series, version 3.7 offers a robust workspace for building control logic and configuring industrial automation devices. Core Features and Programming Capabilities
Xinje PLC Program Tool 3.7 is built for machine builders and maintenance technicians who require a streamlined workflow for complex automation tasks.
Multiple Languages: Supports standard industrial programming including Ladder Diagram (LD), Instruction List (IL), and Function Block (FB).
Advanced Functions: Includes built-in support for PID control, high-speed pulse, PWM, and communication protocols like Modbus-RTU and ASCII.
Real-Time Monitoring: Users can perform live I/O monitoring and force internal tags to troubleshoot and reduce downtime.
High Security: Features a secure system designed to prevent unauthorized password cracking, protecting sensitive proprietary logic. Hardware Compatibility
While older XC series PLCs typically use XCP Pro software, the 3.7 version of the Program Tool (XDPPro) is optimized for: XD Series: XDE, XDM, XD1, XD2, XD3, XD5, XDH, and XDQ. XL Series: XL1, XL3, XL5, and XLH.
XG and XK Series: Various motion and standard control modules. Installation and Setup Guide
For successful implementation on Windows systems, follow these standard steps:
Download: Obtain the installation package (e.g., XDPPro 3.7.14a or newer) from an authorized distributor or the Xinje Download Center.
Install: Run the XDPPro.exe setup wizard, selecting your preferred installation directory. Double-click "I/O Configuration" in the Workspace
Connection: Connect the PLC to your PC using a compatible programming cable (notably, the Delta ACAB230 cable is often compatible).
Configuration: Open the software, go to Option > Software Serial Port Config, and verify the connection status shows "Connect To PLC Succeeded". Common Workflow Operations
Uploading: To back up an existing program, use the "Upload from PLC to PC" function under the Online menu.
Downloading: After writing logic, select Online > Download Program & Data. The software will prompt you to stop the PLC before overwriting the memory.
Ladder Monitoring: Activate this mode to observe live status changes in the ladder logic during operation. Download Center - Wuxi Xinje Electric Co., Ltd.
Xinje PLC Program Tool 3.7 (often referred to as XDPPro) is an engineering environment designed for creating, deploying, and maintaining programs for Xinje controllers. Version 3.7 is widely used for its intuitive workspace and real-time diagnostic capabilities. 1. Getting Started: The Basics
To begin any automation project in version 3.7, follow these standard setup steps:
Project Creation: Launch the XDPPro executable (XDPPro.exe), click File > New Project, and select your specific PLC model.
Communication Setup: Connect your PLC using an RS232-USB cable. Navigate to Option > Software Serial Port Config to run a "Comm-Test" and ensure the status shows "Connect To PLC Succeeded".
Programming Core: The software primarily uses Ladder Logic. Standard keyboard shortcuts like F5 (Normally Open Contact) and F7 (Coil/Output) speed up the development process. 2. Must-Know Programming Commands
Mastering these fundamental blocks will allow you to build robust industrial logic:
SET / RST: Use the SET (F8) command to lock an output on and RST (Shift+F8) to turn it off, useful for latching operations.
Timers (TMR): Start a timer by inputting TMR followed by the timer number and constant (e.g., K50 for 5 seconds).
Tip: Use Retentive Timers (TONR) for processes that must survive power interruptions.
Counters (C): Use LDP X0 to trigger a counter increment (INC C0) and apply comparison commands like LD>= C0 K10 to trigger outputs.
Data Transfer (MOV): The MOV command is essential for transferring values between different registers. 3. Real-Time Diagnostics & Maintenance Version 3.7 excels at live troubleshooting:
Xinje PLC Program Tool 3.7 (often identified by its executable name, XDPPro.exe
) is the primary engineering environment used to develop, deploy, and maintain automation programs for Xinje programmable logic controllers. It provides an intuitive workspace specifically designed for machine builders and maintenance technicians to manage industrial automation projects. Core Functionalities Project Management
: Users can create new projects, configure device communication, and organize control logic through a structured project tree. Program Transfer
: Sends the completed program from your PC to the PLC hardware. One of the most praised aspects of version 3
: Retrieves existing code from a PLC to your computer for backup or editing. Real-time Monitoring
: The tool allows for live tracking of I/O status and internal tags, which is critical for commissioning and identifying faults. Communication Setup
: It supports various configurations, including [Software Serial Port Config] for RS232-USB connections and Modbus parameter adjustments. 维控科技 Setup and Connectivity
To establish a connection between the tool and a physical PLC, follow these general steps: Physical Connection : Connect the PLC to your PC using a dedicated Xinje serial programming cable or an RS232-USB converter. Software Configuration : In the Program Tool, navigate to [Option] > [Software Serial Port Config] to select the correct COM port. Verification : A red prompt stating "Connect To PLC Succeeded" confirms a successful link. 维控科技 Supported Hardware Families
Version 3.7 is widely used for several Xinje series, including: XD/XL Series
: Small-sized PLCs known for stable performance and wide application fields.
: Often used with older versions, though many project files are compatible with the updated tool. Integrated Controllers : Supports units like the XP and XMP series which combine HMI and PLC functions. Programming Environment Features Xinje - XWiki
Xinje PLC Program Tool 3.7 (often identified by its executable XDPPro.exe
) is an engineering environment used to create, deploy, and maintain automation programs for Xinje programmable logic controllers. This version is particularly popular among users for managing series like the Wuxi Xinje Electric Co., Ltd. Key Features Comprehensive Workspace
: Offers an intuitive interface to build control logic using ladder diagrams C language function blocks. Real-Time Monitoring
: Supports live monitoring of I/O states, internal registers, and program execution. Advanced Diagnostics : Includes forcing functions, diagnostic views, and a built-in oscilloscope to isolate issues quickly. Hardware Support
: Configures high-speed counting (up to 80kHz), pulse output (up to 100kHz), and X-NET fieldbus functions. Quick Setup & Operation Guide 1. Communication Configuration To establish a connection between your PC and the PLC: Connect the PLC to your PC using a standard USB or RS232-USB converter cable. In the software, go to [Software Serial Port Config] Comm Mode Settings Select the correct identified in your PC's Device Manager. [Comm-Test]
. A "Connect To PLC Succeeded" message confirms the setup is ready. 维控科技 2. Programming Workflow New Project
: Start a new project and select your specific PLC model (e.g., XD3-16R-E) to ensure correct I/O mapping. Writing Logic
: Use the project tree to manage software blocks like auxiliary relays, timers, and data registers. Downloading [Download Program & Data]
. You may be prompted to stop the PLC before the transfer can complete. : Once downloaded, switch the PLC to "Run" mode via the software or physical switch to begin execution. 维控科技 Safety & Maintenance Tips
Based on the current state of Xinje’s software ecosystem, "Xinje PLC Program Tool 3.7" likely refers to Xinje PLC Program Tool (XCP Pro), which is the standard programming environment for their XC series PLCs.
Here is a detailed review of the software, broken down by usability, features, and performance.
The "Hardware Configuration" window allows users to define expansion modules (AD/DA modules, temperature modules) easily. The software automatically calculates the input/output addresses, reducing wiring errors.