Skip To Main Content

Logo Image

Driver Realtek Rtl8188ftv Wireless Lan 80211n Usb 20 Full May 2026

No official driver exists. Use Chris1111's Wireless USB Adapter drivers:


If you cannot find a working driver, use Driver Identifier. It will scan your hardware ID (USB\VID_0BDA&PID_F179) and provide a direct match. driver realtek rtl8188ftv wireless lan 80211n usb 20 full

Pro Tip: The hardware ID for the RTL8188FTV is typically USB\VID_0BDA&PID_F179. You can verify this in Device Manager under "Unknown device" → Properties → Details → Hardware Ids. No official driver exists


Even with the "driver realtek rtl8188ftv wireless lan 80211n usb 20 full" installed, problems can arise. Here are the top five fixes. If you cannot find a working driver, use Driver Identifier

On Windows 10/11 (using the full Realtek driver):

netsh wlan set hostednetwork mode=allow ssid=MyHotspot key=password123
netsh wlan start hostednetwork

Note: Some Windows builds require the "Mobile Hotspot" settings page.

On Linux (hostapd):

sudo apt install hostapd dnsmasq
sudo nano /etc/hostapd/hostapd.conf
# Add: driver=rtl8188fu, ssid=MyAP, wpa_passphrase=12345678
sudo systemctl start hostapd

Logo Title

No official driver exists. Use Chris1111's Wireless USB Adapter drivers:


If you cannot find a working driver, use Driver Identifier. It will scan your hardware ID (USB\VID_0BDA&PID_F179) and provide a direct match.

Pro Tip: The hardware ID for the RTL8188FTV is typically USB\VID_0BDA&PID_F179. You can verify this in Device Manager under "Unknown device" → Properties → Details → Hardware Ids.


Even with the "driver realtek rtl8188ftv wireless lan 80211n usb 20 full" installed, problems can arise. Here are the top five fixes.

On Windows 10/11 (using the full Realtek driver):

netsh wlan set hostednetwork mode=allow ssid=MyHotspot key=password123
netsh wlan start hostednetwork

Note: Some Windows builds require the "Mobile Hotspot" settings page.

On Linux (hostapd):

sudo apt install hostapd dnsmasq
sudo nano /etc/hostapd/hostapd.conf
# Add: driver=rtl8188fu, ssid=MyAP, wpa_passphrase=12345678
sudo systemctl start hostapd