Fujitsu Irmc Default Password

The default credentials for Fujitsu iRMC differ slightly depending on the generation of the hardware and the region of distribution, but generally follow one of two patterns.

🔐 Immediately change the default password after first login.
The default admin/admin is widely known and a serious security risk if the iRMC is exposed to a network.

The default password for Fujitsu iRMC (integrated Remote Management Controller) depends on the generation of the server you are using. Traditional Default Credentials

For older generations (iRMC S2, S3, S4, and early S5), the standard factory default credentials are: New Password Policy (iRMC S6 and Modern Servers) Starting with

(and some late S5 models like the PRIMERGY M5 series), Fujitsu implemented a unique password policy to enhance security. Fujitsu Global Individual Passwords

: Each server now has a unique, case-sensitive default password generated specifically for that unit. Where to find it System ID Card

: Look for a pull-out tab or card (System ID Card) on the front or rear of the server. The password is the complete line of text printed below the barcode. Top Cover Label

: If there is no ID card, the unique password may be on a label attached to the top cover of the server. : These unique passwords often follow a pattern like Admin-XXXXXXXXXXXX Admin-4CkNxNZqWoOK

). Note that the "Admin-" prefix is part of the password itself. Fujitsu Global Useful Troubleshooting Links Fsas Technologies iRMC S6 FAQ

: Official guide on identifying unique default passwords and common character confusion (e.g., lowercase "l" vs. uppercase "I"). How to reset iRMC admin password

: A guide for using IPMI tools to reset the password from within the operating system if you are locked out. iRMC S6 Configuration and Maintenance Manual

Let's walk through a typical first-time login scenario. fujitsu irmc default password

Prerequisites:

Steps:

Click Login.

You are now inside the iRMC web interface.

What if you changed the password and lost it? Do not panic. You have two options.

curl -k https://<iRMC_IP>/redfish/v1/Managers/1 -u admin:admin

If the command succeeds without error, the default password is still active – critical finding.

The Fujitsu iRMC default password—admin / admin—is a lifeline for initial configuration and recovery. But leaving it unchanged is an invitation to compromise. Every day that default credential remains active on a network-accessible server, you are betting your security posture on the hope that no attacker scans for it.

Your action plan:

The convenience of admin/admin ends the moment the server leaves the box. Take control of your out-of-band management before someone else does.

For official documentation, visit the Fujitsu Support Portal (support.ts.fujitsu.com). This article is for educational purposes. Always follow your organization’s security policies.

For legacy Fujitsu servers, the default username and password for the Integrated Remote Management Controller (iRMC) is admin / admin. The default credentials for Fujitsu iRMC differ slightly

However, modern systems (iRMC S6 and newer) use unique credentials based on the hardware's serial number to improve security. Default Credentials by Version Default Username Default Password Legacy (S2 - S5) admin admin Modern (S6+) admin Unique Serial-Based For

and newer, the unique password is found on the physical System ID card attached to the server. Fujitsu recommends using a barcode scanner to avoid common typing errors, such as confusing the letter "I" with the number "1". How to Reset iRMC Credentials

If the default credentials fail, you can reset the password without a system reboot using IPMI tools from the host operating system.

Linux (using ipmitool):Ensure IPMI drivers are loaded, then execute:ipmitool user set password 2 .

Windows:Use the Fujitsu IPMIVIEW utility to modify user accounts directly.

BIOS / UEFI:Reboot the server, enter the BIOS (typically F2), and navigate to the Advanced -> IPMI section. You can select "Load iRMC Default Values" to return the controller to factory settings. Security Requirements for iRMC S6

When setting a new password on modern S6 systems, it must meet these criteria: At least 12 characters.

Include at least three of the following: lowercase letters, uppercase letters, digits, or special characters.

New security features include account locking after failed attempts and two-factor authentication. Troubleshooting Access If you are locked out:

The default credentials for a Fujitsu iRMC (integrated Remote Management Controller) depend on the hardware generation of your

server. Older generations typically use a generic global password, while newer generations (S6 and later) utilize unique, device-specific passwords for enhanced security. Default Credentials by Generation iRMC S2, S3, S4, and S5 (all lowercase) (all lowercase) iRMC S6 (and newer) (all lowercase) Unique to each server. The default password for Fujitsu iRMC (integrated Remote

Fujitsu no longer uses "admin" as a global default for these generations Where to Find the Unique iRMC S6 Password

If you have a newer server with an iRMC S6 controller, you can find the individual default password in two physical locations: System ID Card: A pull-out tag usually located at the front of the server

. The password is the complete line of text printed below the barcode (e.g., Admin-4CkNxNZqWoOK Top Cover Label:

For smaller servers that lack a System ID Card, a label with the default password is attached directly to the top cover of the chassis Important Security & Troubleshooting Tips Case Sensitivity: All iRMC passwords are case-sensitive Ambiguous Characters:

On printed labels, capital "I" (India) and lowercase "l" (lima) can look identical. If typing manually fails, Fujitsu recommends using a smartphone barcode scanner

on the System ID Card to capture the exact string without errors Forced Change:

Most newer iRMC versions will force you to change this default password immediately after your first successful login Resetting Credentials:

If the default password has been changed and lost, you may need to use the ServerView Installation Manager (SVIM)

via the host operating system to reset the iRMC to factory defaults Are you trying to a lost password, or are you setting up a server for the first time? Downloads - Fujitsu Support

Here’s a quick guide to the default credentials for Fujitsu iRMC (Integrated Remote Management Controller), commonly found on Fujitsu PRIMERGY servers.

Yes, it is that simple—and that risky. For the vast majority of Fujitsu PRIMERGY servers manufactured in the last decade, the factory username and password are both admin.