Skip to Content

Hp Fxn1 E93839 Motherboard Specs Updated May 2026

Because this uses the A68M chipset, storage is a mix of legacy SATA II and slightly faster SATA III.

  • PCIe Slots:

    • GPU Warning: The PCIe slot is only v2.0. While a modern GPU (GTX 1060, RX 570) will work, you will lose about 5-10% performance due to bandwidth bottlenecks.

    The HP FXN1 (E93839) is a capable, proprietary motherboard designed for HP AiO desktops of the Skylake/Kaby Lake generation. While it supports modern CPUs, M.2 NVMe, and DDR4, its non-standard form factor, power input, and BIOS restrictions make it unsuitable for DIY builds or standard PC cases. It should only be repaired or upgraded within the original HP AiO chassis. hp fxn1 e93839 motherboard specs updated

    This is where most users get stuck.

    Warning: This motherboard does not have standard 9-pin USB 2.0 headers for a front panel card reader. It uses a flat ribbon cable header. To add front USB 3.0, you need an adapter. Because this uses the A68M chipset, storage is

    Here is the verified, updated spec sheet for the HP FXN1 E93839.

    This motherboard uses the Intel W series chipset. PCIe Slots:

  • TDP Support: Supports up to 95W TDP processors.

    • Using an Intel Core i7-3770 + 16GB DDR3-1600 + SATA III SSD:

    Bottlenecks: SATA III performance is limited (max ~450 MB/s real-world due to chipset DMI 2.0). NVMe via PCIe adapter will run at PCIe Gen 2.0 x4 (half speed).

    HP no longer provides active BIOS updates via consumer websites. However, the last stable BIOS revision for the FXN1 E93839 was:

    How to update: