Huawei Ne40e Default Password May 2026

Historically, older versions of Huawei VRP (and many other network vendors) shipped with default credentials such as:

Why this changed: As cybersecurity standards tightened (driven by regulations and frameworks like NIST and ISO 27001), vendors moved away from static default passwords. A router shipping with a hardcoded password represents a massive security liability. If a botnet scans the internet for open ports and tries known default passwords, a core router like the NE40E could be compromised in minutes.

Therefore, on a brand-new, out-of-the-box NE40E running modern firmware:

If you are responsible for a NE40E, follow these rules to avoid the "lost password" nightmare:

The NE40E uses AAA (Authentication, Authorization, Accounting). If a previous administrator configured local users, the default behavior is overridden. You need a specific username/password combination created by that admin.

This wipes the configuration but allows access.

Warning: This erases the startup configuration. Ensure you have a backup.

If you’re working with an NE40E router and need to recover or reset access, I can explain the standard password recovery procedure (which requires console access and a reboot, typically documented in Huawei’s official product documentation). I can also help with:

Let me know which aspect is most relevant to your situation.

Summary:

Why there’s no single default password:

How administrators normally gain initial access: huawei ne40e default password

If you cannot log in (recommended steps):

Security notes (brief):

If you want, I can:

Related search suggestions: (automatically generated)

The default password for Huawei NE40E series routers varies significantly depending on the software version, the access method (CLI vs. BootROM), and whether the device is being powered on for the very first time. First Login: Interactive Password Setup For modern versions of the Go to product viewer dialog for this item. V800R012C00

and later), Huawei has moved away from static default passwords for initial access to improve security.

Initial Setup: When you first power on the device and connect via the console port, the system will not have a preset password. Instead, it will immediately prompt you to configure a new password.

Password Requirements: The new password must typically be 8 to 16 characters long and include at least two of the following: uppercase letters, lowercase letters, digits, and special characters. Default Credentials for Older Versions or Specific Ports

If you are working with an older software version or trying to access specific sub-menus, the following credentials may apply: Access Method Default Username Default Password STelnet (SSH) admin Admin@huawei or admin@huawei.com BootROM / BIOS (V800R011 and earlier) HUAWEI Kernel Menu WWW@HUAWEI Management IP (192.168.0.1) admin Admin@huawei Accessing the BootROM Menu

If you need to perform low-level maintenance or recovery, the BootROM menu can be accessed during the startup sequence: Logging In to an AR Router Through a Web System

The default password for a Huawei NE40E router depends on the version of the software (VRP) it is running and the specific subsystem (CLI, BootROM, or BIOS) you are trying to access. Management and CLI Login (Console/Telnet/SSH) V800R012C00 and later : There is no default password Historically, older versions of Huawei VRP (and many

. Upon the first login, the system will immediately prompt you to set a new password that meets specific complexity requirements (8–16 characters, including uppercase, lowercase, digits, and special characters). Older Versions (V800R011C10 and earlier) : Common defaults include admin@huawei.com Admin@huawei Huawei@123 BootROM and BIOS Menu If you need to enter the BootROM menu (usually by pressing during startup), the defaults are: V800R011C10 and earlier WWW@HUAWEI V800R012C00 and later : No default; you must set one during the initial setup. Resetting if Password is Lost

If you cannot log in, use the following methods to regain access:

Navigating the initial configuration of a Huawei NetEngine 40E (NE40E) router often begins with a critical question: what are the default login credentials? Unlike consumer-grade hardware, enterprise-grade Huawei routers typically enforce a "no default password" policy for console access to ensure immediate security.

Here is a comprehensive guide to the default passwords, initial login procedures, and recovery methods for the Huawei NE40E series. 1. Default Passwords for Huawei NE40E

While modern VRP (Versatile Routing Platform) versions often require you to set a password upon the first login, certain system-level menus and older software versions may have preset credentials.

Console Port: By default, there is no preset password. Upon your first physical connection via the console port, the system will prompt you to configure a new password immediately. BootROM / BIOS Menu: Preset Password: HUAWEI (case-sensitive).

Alternative (Older Versions): Admin@huawei.com or WWW@HUAWEI. Management Network Port (STelnet/SSH): Default IP: 192.168.0.1/24. Default Username: admin. Common Default Passwords: Admin@huawei or admin@huawei.com. 2. First-Time Login Procedure

When you power on a factory-new NE40E, follow these steps to establish access:

Physical Connection: Connect your PC to the router's Console port using a serial cable.

Terminal Settings: Use terminal software (like PuTTY or SecureCRT) with settings: 9600 bps, 8 data bits, 1 stop bit, and no parity.

Password Configuration: When prompted, enter a new password that meets the complexity requirements: 8–16 characters, containing at least two types (uppercase, lowercase, digits, or special characters). Huawei Technical Support Warning: This erases the startup configuration

How Do I Clear a Console Port Password After a Login Failure?

for initial setup. Instead, the system triggers a "first-login" process. V800R012C00 and later:

You are typically required to create a username and set a password upon your first login. Older versions (V200R005 and earlier): Some configurations may use

, but this is less common on enterprise NE series compared to consumer AR routers. Standard Prompt: If the device is unconfigured, it will prompt: Please configure the login password (8-16) immediately upon connection. 2. BootROM / BIOS Passwords If you need to enter the BootROM menu (usually by pressing

during startup), use the following defaults depending on your version: Default Password V800R011C10 and earlier Admin@huawei.com WWW@HUAWEI V800R012C00 and later Mandatory setup on first entry 3. How to Reset if Locked Out

If you’ve forgotten the current password, you have two primary recovery paths:

First Login Configuration - NE40E - Huawei Technical Support

You may see these searches for the NE40E:

Beware of brute-force tools. Attempting to brute-force SSH or console on an NE40E can trigger the device's built-in attack defense, locking out the management interface for hours.

When a brand new NE40E boots for the first time from the factory, the console port is often configured with no authentication required. You can connect via a serial console cable, press Enter, and gain immediate access to the user view (<Huawei>). From there, you enter system view to set passwords.

However: This is only possible if:

There is no hardcoded string like "admin" for console access.